From mboxrd@z Thu Jan 1 00:00:00 1970 From: mark.rutland@arm.com (Mark Rutland) Date: Wed, 3 Dec 2014 10:27:22 +0000 Subject: [PATCH v3 1/3] power: reset: adjust priority of simple syscon reboot driver In-Reply-To: <1417540320-2385-2-git-send-email-stefan@agner.ch> References: <1417540320-2385-1-git-send-email-stefan@agner.ch> <1417540320-2385-2-git-send-email-stefan@agner.ch> Message-ID: <20141203102722.GB21310@leverpostej> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Dec 02, 2014 at 05:11:58PM +0000, Stefan Agner wrote: > Currently, all restart handler use the priority 128, including > watchdogs. Probably most SoC have a watchdog, and some of them > register it also as a restart handler. But if a SoC specifies > a dedicated reboot capability using this syscon driver, this is > usually the preferred reboot method. Hence, raise the priority > of this driver to 192. > > Signed-off-by: Stefan Agner This looks good to me. Acked-by: Mark Rutland Thanks, Mark. > --- > drivers/power/reset/syscon-reboot.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c > index 815b901..c4049f4 100644 > --- a/drivers/power/reset/syscon-reboot.c > +++ b/drivers/power/reset/syscon-reboot.c > @@ -68,7 +68,7 @@ static int syscon_reboot_probe(struct platform_device *pdev) > return -EINVAL; > > ctx->restart_handler.notifier_call = syscon_restart_handle; > - ctx->restart_handler.priority = 128; > + ctx->restart_handler.priority = 192; > err = register_restart_handler(&ctx->restart_handler); > if (err) > dev_err(dev, "can't register restart notifier (err=%d)\n", err); > -- > 2.1.3 > >