[PATCH 08/10] ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Sun, Dec 07, 2014 at 11:18:28PM +0800, Chen-Yu Tsai wrote:
> >> +     reg_vcc3v0: vcc3v0 {
> >> +             compatible = "regulator-fixed";
> >> +             regulator-name = "vcc3v0";
> >> +             regulator-min-microvolt = <3000000>;
> >> +             regulator-max-microvolt = <3000000>;
> >> +     };
> >
> > There's already such a regulator in sunxi-common-regulators.
> 
> I cannot include sunxi-common-regulators, not without a lot of work.
> sunxi-common-regulators includes a soc/pio node, but the addresses,
> and thus the node names are different. This results in:
> 
> ERROR (duplicate_label): Duplicate label 'pio' on
> /soc at 01c00000/pinctrl at 01c20800 and /soc/pinctrl at 06000800
> 
> If we move to preprocessor-based includes and phandle referencing
> (&pio { .... })
> to override/add nodes and properties, then it would work. But that is
> a lot of work
> going through all of our DTs.

Not really, you can just do so in sunxi-common-regulator. There's no
need to do it everywhere else.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141207/de956048/attachment.sig>