From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/11] mtd: nand: Support for new DT NAND driver
Date: Tue, 9 Dec 2014 14:54:50 +0000 [thread overview]
Message-ID: <20141209145450.GB3951@x1> (raw)
In-Reply-To: <1415206793-25670-1-git-send-email-lee.jones@linaro.org>
On Wed, 05 Nov 2014, Lee Jones wrote:
> Hi Brian,
>
> I believe all of your queries have either been answered or addressed
> and I am hoping this will be the last submission [v2]. :)
>
> This is v4 of the squashed submission. v1 had a small typo which
> prevented the BBT code from being truly configurable, v2 had some
> build issues due to a silly 'post testing' fixup mistake and v3
> suffered with some checkpatch errors which have been rectified and
> some unused/utilised code segments which have now been removed.
> I've also fixed some DMA issues which you spotted and provided a
> more suitable ECC tolerance, which has been coupled with a comment
> which describes our reasons for not taking the OOB area into
> consideration during this operation.
>
> Also:
>
> Builds Pass
> Smatch Pass
> Sparse Pass
> Bisectability Pass
> NAND Test Pass
> UBI Tests Pass
> MTD Tests Pass (accept OOB test which is not applicable with
> this controller. I will rectify this in the
> near future though, as it _can be_ useful for
> debugging/testing.)
7 week poke.
> Lee Jones (11):
> ARM: multi-v7: Enable ST BCH NAND
> ARM: sti: Add two new clock definitions for use with ST's NAND
> controllers
> ARM: sti: Add BCH (NAND Flash) Controller support for STiH41x (Orly)
> SoCs
> ARM: sti: Enable BCH NAND for STiH416 B2020-RevE
> mtd: nand: Add new generic NAND Device Tree property
> 'nand-chip-select'
> mtd: nand: WARN() if EEC Bytes per page is larger than the OOB
> mtd: nand: stm_nand_bch: provide Device Tree documentation
> mtd: nand: stm_nand_bch: add shared register defines for ST's NAND
> Controller drivers
> mtd: nand: stm_nand_bch: adding BBT header
> mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller
> mtd: nand: stm_nand_bch: provide ST's implementation of Bad Block
> Table
>
> Documentation/devicetree/bindings/mtd/nand.txt | 3 +
> Documentation/devicetree/bindings/mtd/stm-nand.txt | 74 +
> arch/arm/boot/dts/stih416-b2020e.dts | 8 +
> arch/arm/boot/dts/stih41x-b2020.dtsi | 35 +
> arch/arm/configs/multi_v7_defconfig | 2 +
> drivers/mtd/nand/Kconfig | 15 +
> drivers/mtd/nand/Makefile | 3 +
> drivers/mtd/nand/nand_base.c | 2 +
> drivers/mtd/nand/stm_nand_bbt.c | 619 ++++++++
> drivers/mtd/nand/stm_nand_bch.c | 1645 ++++++++++++++++++++
> drivers/mtd/nand/stm_nand_regs.h | 304 ++++
> include/dt-bindings/clock/stih416-clks.h | 2 +
> include/linux/mtd/stm_nand.h | 131 ++
> include/linux/mtd/stm_nand_bbt.h | 22 +
> 14 files changed, 2865 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/stm-nand.txt
> create mode 100644 drivers/mtd/nand/stm_nand_bbt.c
> create mode 100644 drivers/mtd/nand/stm_nand_bch.c
> create mode 100644 drivers/mtd/nand/stm_nand_regs.h
> create mode 100644 include/linux/mtd/stm_nand.h
> create mode 100644 include/linux/mtd/stm_nand_bbt.h
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2014-12-09 14:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-05 16:59 [PATCH v4 00/11] mtd: nand: Support for new DT NAND driver Lee Jones
2014-11-05 16:59 ` [PATCH v4 01/11] ARM: multi-v7: Enable ST BCH NAND Lee Jones
2014-11-05 16:59 ` [PATCH v4 02/11] ARM: sti: Add two new clock definitions for use with ST's NAND controllers Lee Jones
2014-11-05 16:59 ` [PATCH v4 03/11] ARM: sti: Add BCH (NAND Flash) Controller support for STiH41x (Orly) SoCs Lee Jones
2014-11-05 16:59 ` [PATCH v4 04/11] ARM: sti: Enable BCH NAND for STiH416 B2020-RevE Lee Jones
2014-11-05 16:59 ` [PATCH v4 05/11] mtd: nand: Add new generic NAND Device Tree property 'nand-chip-select' Lee Jones
2014-11-05 16:59 ` [PATCH v4 06/11] mtd: nand: WARN() if EEC Bytes per page is larger than the OOB Lee Jones
2014-11-05 16:59 ` [PATCH v4 07/11] mtd: nand: stm_nand_bch: provide Device Tree documentation Lee Jones
2014-11-05 16:59 ` [PATCH v4 08/11] mtd: nand: stm_nand_bch: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-11-05 16:59 ` [PATCH v4 09/11] mtd: nand: stm_nand_bch: adding BBT header Lee Jones
2014-11-05 16:59 ` [PATCH v4 10/11] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller Lee Jones
2014-12-16 22:46 ` Brian Norris
2014-11-05 16:59 ` [PATCH v4 11/11] mtd: nand: stm_nand_bch: provide ST's implementation of Bad Block Table Lee Jones
2014-12-16 22:49 ` Brian Norris
2014-12-09 14:54 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141209145450.GB3951@x1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).