* [RFC] ARM: dts: mt8173: Add psci cpuidle support
@ 2014-12-15 8:59 Howard Chen
2014-12-15 11:07 ` Mark Rutland
0 siblings, 1 reply; 2+ messages in thread
From: Howard Chen @ 2014-12-15 8:59 UTC (permalink / raw)
To: linux-arm-kernel
add device tree for psci-0.2 on mt8173 platform
add device tree for cupidle-arm64 on mt8173 platform
Signed-off-by: Howard Chen <howard.chen@linaro.org>
---
arch/arm64/boot/dts/mt8173.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/mt8173.dtsi b/arch/arm64/boot/dts/mt8173.dtsi
index 79b7e46..c5e1127 100644
--- a/arch/arm64/boot/dts/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mt8173.dtsi
@@ -44,6 +44,11 @@
};
};
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -54,6 +59,7 @@
reg = <0x000>;
enable-method = "mt-boot";
cpu-release-addr = <0x0 0x40000200>;
+ cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
};
cpu1: cpu at 1 {
@@ -62,6 +68,7 @@
reg = <0x001>;
enable-method = "mt-boot";
cpu-release-addr = <0x0 0x40000200>;
+ cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
};
cpu2: cpu at 2 {
@@ -70,6 +77,7 @@
reg = <0x100>;
enable-method = "mt-boot";
cpu-release-addr = <0x0 0x40000200>;
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
cpu3: cpu at 3 {
@@ -78,8 +86,51 @@
reg = <0x101>;
enable-method = "mt-boot";
cpu-release-addr = <0x0 0x40000200>;
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
+ idle-states {
+ entry-method = "arm,psci-0.2";
+
+ CPU_SLEEP_0_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <250>;
+ exit-latency-us = <500>;
+ min-residency-us = <950>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <600>;
+ exit-latency-us = <1100>;
+ min-residency-us = <2700>;
+ wakeup-latency-us = <1500>;
+ };
+
+ CPU_SLEEP_1_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <70>;
+ exit-latency-us = <100>;
+ min-residency-us = <300>;
+ wakeup-latency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_1: cluster-sleep-1 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1200>;
+ min-residency-us = <3500>;
+ wakeup-latency-us = <1300>;
+ };
+ };
};
clocks {
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [RFC] ARM: dts: mt8173: Add psci cpuidle support
2014-12-15 8:59 [RFC] ARM: dts: mt8173: Add psci cpuidle support Howard Chen
@ 2014-12-15 11:07 ` Mark Rutland
0 siblings, 0 replies; 2+ messages in thread
From: Mark Rutland @ 2014-12-15 11:07 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 15, 2014 at 08:59:08AM +0000, Howard Chen wrote:
> add device tree for psci-0.2 on mt8173 platform
> add device tree for cupidle-arm64 on mt8173 platform
>
> Signed-off-by: Howard Chen <howard.chen@linaro.org>
> ---
> arch/arm64/boot/dts/mt8173.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mt8173.dtsi b/arch/arm64/boot/dts/mt8173.dtsi
> index 79b7e46..c5e1127 100644
> --- a/arch/arm64/boot/dts/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mt8173.dtsi
> @@ -44,6 +44,11 @@
> };
> };
>
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -54,6 +59,7 @@
> reg = <0x000>;
> enable-method = "mt-boot";
What is "mt-boot", and why is this not "psci"?
What tree is this based on?
The additions for idle look fine as of themselves, but we shouldn't
require non-standard enable method code with PSCI.
Mark.
> cpu-release-addr = <0x0 0x40000200>;
> + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
> };
>
> cpu1: cpu at 1 {
> @@ -62,6 +68,7 @@
> reg = <0x001>;
> enable-method = "mt-boot";
> cpu-release-addr = <0x0 0x40000200>;
> + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
> };
>
> cpu2: cpu at 2 {
> @@ -70,6 +77,7 @@
> reg = <0x100>;
> enable-method = "mt-boot";
> cpu-release-addr = <0x0 0x40000200>;
> + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
> };
>
> cpu3: cpu at 3 {
> @@ -78,8 +86,51 @@
> reg = <0x101>;
> enable-method = "mt-boot";
> cpu-release-addr = <0x0 0x40000200>;
> + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
> };
>
> + idle-states {
> + entry-method = "arm,psci-0.2";
> +
> + CPU_SLEEP_0_0: cpu-sleep-0-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <250>;
> + exit-latency-us = <500>;
> + min-residency-us = <950>;
> + };
> +
> + CLUSTER_SLEEP_0: cluster-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x1010000>;
> + entry-latency-us = <600>;
> + exit-latency-us = <1100>;
> + min-residency-us = <2700>;
> + wakeup-latency-us = <1500>;
> + };
> +
> + CPU_SLEEP_1_0: cpu-sleep-1-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <70>;
> + exit-latency-us = <100>;
> + min-residency-us = <300>;
> + wakeup-latency-us = <150>;
> + };
> +
> + CLUSTER_SLEEP_1: cluster-sleep-1 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x1010000>;
> + entry-latency-us = <500>;
> + exit-latency-us = <1200>;
> + min-residency-us = <3500>;
> + wakeup-latency-us = <1300>;
> + };
> + };
> };
>
> clocks {
> --
> 1.9.1
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-15 11:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-15 8:59 [RFC] ARM: dts: mt8173: Add psci cpuidle support Howard Chen
2014-12-15 11:07 ` Mark Rutland
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).