From: david.lanzendoerfer@o2s.ch (David Lanzendörfer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] mmc: sunxi: Lock fix
Date: Tue, 16 Dec 2014 01:37:45 +0100 [thread overview]
Message-ID: <20141216003745.15488.52305.stgit@dizzy-6.o2s.ch> (raw)
In-Reply-To: <20141216003412.15488.54812.stgit@dizzy-6.o2s.ch>
1) Adding a comment in order to clarify the choice of the locks within
sunxi_mmc_handle_manual_stop
2) As ?? has pointed out the wait_dma variable was not accessed within the spin lock
block in sunxi_mmc_request and so (even if it should never happend) it would have
theoretically been possible that some other function would access the variable
at the same time as the function.
This has been changed now and the function is using local variables outside the lock
and copys the value over during the lock phase.
Signed-off-by: David Lanzend?rfer <david.lanzendoerfer@o2s.ch>
Reported-by: ?? <lixiang@allwinnertech.com>
---
drivers/mmc/host/sunxi-mmc.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 15cb8b7..25ba321 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -570,6 +570,15 @@ static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
}
dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
+
+ /*
+ * We will never have more than one outstanding request,
+ * and we do not complete the request until after
+ * we've cleared host->manual_stop_mrq so we do not need to
+ * spin lock this function.
+ * Additionally we have wait states within this function
+ * so having it in a lock is a very bad idea.
+ */
sunxi_mmc_send_manual_stop(host, mrq);
spin_lock_irqsave(&host->lock, iflags);
@@ -766,6 +775,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
unsigned long iflags;
u32 imask = SDXC_INTERRUPT_ERROR_BIT;
u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
+ bool wait_dma = host->wait_dma;
int ret;
/* Check for set_ios errors (should never happen) */
@@ -816,7 +826,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (cmd->data->flags & MMC_DATA_WRITE)
cmd_val |= SDXC_WRITE;
else
- host->wait_dma = true;
+ wait_dma = true;
} else {
imask |= SDXC_COMMAND_DONE;
}
@@ -850,6 +860,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
}
host->mrq = mrq;
+ host->wait_dma = wait_dma;
mmc_writel(host, REG_IMASK, host->sdio_imask | imask);
mmc_writel(host, REG_CARG, cmd->arg);
mmc_writel(host, REG_CMDR, cmd_val);
next prev parent reply other threads:[~2014-12-16 0:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-16 0:37 [PATCH 0/4] mmc: sunxi: General fixup David Lanzendörfer
2014-12-16 0:37 ` David Lanzendörfer [this message]
2014-12-16 0:37 ` [PATCH 2/4] mmc: sunxi: Correcting SDXC_HARDWARE_RESET bit David Lanzendörfer
2014-12-16 0:37 ` [PATCH 3/4] mmc: sunxi: Reset behavior fix David Lanzendörfer
2014-12-16 9:57 ` Hans de Goede
[not found] ` <2457832.ADcVT4pQTP@pagira.o2s.ch>
2014-12-29 10:13 ` sunxi-project-meetup@31c3 Hans de Goede
2014-12-16 0:38 ` [PATCH 4/4] mmc: sunxi: Removing unused code David Lanzendörfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141216003745.15488.52305.stgit@dizzy-6.o2s.ch \
--to=david.lanzendoerfer@o2s.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).