linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
Date: Wed, 17 Dec 2014 22:58:48 -0800	[thread overview]
Message-ID: <20141218065848.29014.24886@quantum> (raw)
In-Reply-To: <20141217152322.29014.7739@quantum>

Quoting Mike Turquette (2014-12-17 07:23:22)
> Quoting Krzysztof Kozlowski (2014-12-16 00:20:15)
> > On pon, 2014-12-15 at 14:26 -0800, Kevin Hilman wrote:
> > > Kevin Hilman <khilman@kernel.org> writes:
> > > 
> > > > Sylwester Nawrocki <s.nawrocki@samsung.com> writes:
> > > >
> > > >> On 09/12/14 13:59, Krzysztof Kozlowski wrote:
> > > >>> On pi?, 2014-12-05 at 15:15 +0100, Krzysztof Kozlowski wrote:
> > > >>>> > Audio subsystem clocks are located in separate block. On Exynos 5420 if
> > > >>>> > clock for this block (from main clock domain) 'mau_epll' is gated then
> > > >>>> > any read or write to audss registers will block.
> > > >>>> > 
> > > >>>> > This kind of boot hang was observed on Arndale Octa and Peach Pi/Pit
> > > >>>> > after introducing runtime PM to pl330 DMA driver. After that commit the
> > > >>>> > 'mau_epll' was gated, because the "amba" clock was disabled and there
> > > >>>> > were no more users of mau_epll.
> > > >>>> > 
> > > >>>> > The system hang on one of steps:
> > > >>>> > 1. Disabling unused clocks from audss block.
> > > >>>> > 2. During audss GPIO setup (just before probing i2s0 because
> > > >>>> >    samsung_pinmux_setup() tried to access memory from audss block which was
> > > >>>> >    gated.
> > > >>>> > 
> > > >>>> > Add a workaround for this by enabling the 'mau_epll' clock in probe.
> > > >>>> > 
> > > >>>> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > >>>> > ---
> > > >>>> >  drivers/clk/samsung/clk-exynos-audss.c | 29 ++++++++++++++++++++++++++++-
> > > >>>> >  1 file changed, 28 insertions(+), 1 deletion(-)
> > > >>>
> > > >>> Sorry for pinging so quick but merge window is open and it looks like
> > > >>> booting Exynos542x boards will be broken (because pl330 will no longer
> > > >>> hold adma clock enabled so whole audss domain will be gated).
> > > >>> 
> > > >>> This is a non-intrusive workaround for that issue, as wanted by
> > > >>> Sylwester:
> > > >>> https://lkml.org/lkml/2014/12/5/223
> > > >>> 
> > > >>> Any comments on this?
> > > >>
> > > >> The patch looks OK to me, it would be good though if someone else
> > > >> has confirmed it fixes the bug. I don't have any clock patches queued
> > > >> at the moment. Perhaps you could apply it directly, Mike ?
> > > >
> > > > I confirm it fixes the boot hang in linux-next (next-20141210) on my
> > > > exynos5800-peach-pi and exynos5420-arndale-octa.  Tested both
> > > > exynos_defconfig and multi_v7_defconfig.
> > > >
> > > > Tested-by: Kevin Hilman <khilman@linaro.org>
> > > 
> > > What's the status of this patch?  linux-next is still broken for several
> > > Exynos5 platforms without this fix.
> > 
> > I believe not only next is broken but also current mainline because
> > runtime PM for pl330 was merged yesterday...
> > 
> > The patch received two tested-bys (Kevin's and Javier's) and Sylwester's
> > ack.
> > 
> > Mike, could you pick the patch and send it to Linus after rc1?
> 
> Will do.

To be clear, I pulled this into clk-next towards -rc1, so it won't need
to go through as an -rc fix.

Regards,
Mike

> 
> Regards,
> Mike
> 
> > 
> > Best regards,
> > Krzysztof
> > 

  reply	other threads:[~2014-12-18  6:58 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-05 14:15 [PATCH] clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated Krzysztof Kozlowski
2014-12-09 12:59 ` Krzysztof Kozlowski
2014-12-09 13:18   ` Sylwester Nawrocki
2014-12-09 14:05     ` Javier Martinez Canillas
2014-12-10 17:35     ` Kevin Hilman
2014-12-15 22:26       ` Kevin Hilman
2014-12-16  8:20         ` Krzysztof Kozlowski
2014-12-17 15:23           ` Mike Turquette
2014-12-18  6:58             ` Mike Turquette [this message]
2014-12-18 22:10               ` Kevin Hilman
2014-12-18 22:32                 ` Mike Turquette
2014-12-24 16:36       ` Paolo Pisati
2015-01-02  9:49         ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141218065848.29014.24886@quantum \
    --to=mturquette@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).