From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Mon, 29 Dec 2014 16:33:30 +0100 Subject: [PATCH 0/3] add Atmel EBI (External Bus Interface) DT nodes for AT91SAM9263 In-Reply-To: <1418979100-13243-1-git-send-email-alexanders83@web.de> References: <1418979100-13243-1-git-send-email-alexanders83@web.de> Message-ID: <20141229163330.050f6b60@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Alexander, On Fri, 19 Dec 2014 09:51:37 +0100 Alexander Stein wrote: > This is based on and requires Boris' work on an EBI driver for AT91. Please > refer to https://lkml.org/lkml/2014/12/3/806. > The reason I added no pinctrl is that those pins from EBI1 in my case are not > muxable. They are fixed so there is nothing I can test here. > I used this patchset and the EBI to configure a PSRAM to be used by the > atmel_lcdfb driver which works so far. > This also means EBI0 is rather untested, but it should behave like EBI1 if > the numbers are correct. Thanks for your patches. Unless there are other changes in the EBI/SMC bindings (which I'm not sure since the EBI driver has not been accepted yet) you have my Acked-by: Boris Brezillon Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com