From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v15 10/11] KVM: arm/arm64: Enable Dirty Page logging for ARMv8
Date: Wed, 7 Jan 2015 13:47:44 +0100 [thread overview]
Message-ID: <20150107124744.GC21092@cbox> (raw)
In-Reply-To: <1418628488-3696-11-git-send-email-m.smarduch@samsung.com>
On Sun, Dec 14, 2014 at 11:28:07PM -0800, Mario Smarduch wrote:
> This patch enables ARMv8 ditry page logging support. Plugs ARMv8 into generic
dirty
> layer through Kconfig symbol, and drops earlier ARM64 constraints to enable
> logging at architecture layer.
>
> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
> ---
> arch/arm/include/asm/kvm_host.h | 12 ------------
> arch/arm/kvm/arm.c | 4 ----
> arch/arm/kvm/mmu.c | 19 +++++++++++--------
> arch/arm64/kvm/Kconfig | 2 ++
> 4 files changed, 13 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index b138431..088ea87 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -223,18 +223,6 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
> kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
> }
>
> -/**
> - * kvm_flush_remote_tlbs() - flush all VM TLB entries
> - * @kvm: pointer to kvm structure.
> - *
> - * Interface to HYP function to flush all VM TLB entries without address
> - * parameter.
> - */
> -static inline void kvm_flush_remote_tlbs(struct kvm *kvm)
> -{
> - kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
> -}
> -
> static inline int kvm_arch_dev_ioctl_check_extension(long ext)
> {
> return 0;
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 6e4290c..1b6577c 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -740,7 +740,6 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
> */
> int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
> {
> -#ifdef CONFIG_ARM
> bool is_dirty = false;
> int r;
>
> @@ -753,9 +752,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
>
> mutex_unlock(&kvm->slots_lock);
> return r;
> -#else /* arm64 */
> - return -EINVAL;
> -#endif
> }
>
> static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
> index dc763bb..59003df 100644
> --- a/arch/arm/kvm/mmu.c
> +++ b/arch/arm/kvm/mmu.c
> @@ -52,11 +52,18 @@ static phys_addr_t hyp_idmap_vector;
>
> static bool kvm_get_logging_state(struct kvm_memory_slot *memslot)
> {
> -#ifdef CONFIG_ARM
> return !!memslot->dirty_bitmap;
> -#else
> - return false;
> -#endif
> +}
> +
> +/**
> + * kvm_flush_remote_tlbs() - flush all VM TLB entries for v7/8
> + * @kvm: pointer to kvm structure.
> + *
> + * Interface to HYP function to flush all VM TLB entries
> + */
> +inline void kvm_flush_remote_tlbs(struct kvm *kvm)
did you intend for a non-staic inline here?
> +{
> + kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
> }
>
> static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
> @@ -895,7 +902,6 @@ static bool kvm_is_device_pfn(unsigned long pfn)
> return !pfn_valid(pfn);
> }
>
> -#ifdef CONFIG_ARM
> /**
> * stage2_wp_ptes - write protect PMD range
> * @pmd: pointer to pmd entry
> @@ -1040,7 +1046,6 @@ void kvm_arch_mmu_write_protect_pt_masked(struct kvm *kvm,
>
> stage2_wp_range(kvm, start, end);
> }
> -#endif
>
> static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
> struct kvm_memory_slot *memslot, unsigned long hva,
> @@ -1445,7 +1450,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
> const struct kvm_memory_slot *old,
> enum kvm_mr_change change)
> {
> -#ifdef CONFIG_ARM
> /*
> * At this point memslot has been committed and there is an
> * allocated dirty_bitmap[], dirty pages will be be tracked while the
> @@ -1453,7 +1457,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
> */
> if (change != KVM_MR_DELETE && mem->flags & KVM_MEM_LOG_DIRTY_PAGES)
> kvm_mmu_wp_memory_region(kvm, mem->slot);
> -#endif
> }
>
> int kvm_arch_prepare_memory_region(struct kvm *kvm,
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index 8ba85e9..3ce389b 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -22,10 +22,12 @@ config KVM
> select PREEMPT_NOTIFIERS
> select ANON_INODES
> select HAVE_KVM_CPU_RELAX_INTERCEPT
> + select HAVE_KVM_ARCH_TLB_FLUSH_ALL
> select KVM_MMIO
> select KVM_ARM_HOST
> select KVM_ARM_VGIC
> select KVM_ARM_TIMER
> + select KVM_GENERIC_DIRTYLOG_READ_PROTECT
> ---help---
> Support hosting virtualized guest machines.
>
> --
> 1.9.1
>
next prev parent reply other threads:[~2015-01-07 12:47 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-15 7:27 [PATCH v15 00/11] KVM//x86/arm/arm64: dirty page logging for ARMv7/8 (3.18.0-rc2) Mario Smarduch
2014-12-15 7:27 ` [PATCH v15 01/11] KVM: Add architecture-defined TLB flush support Mario Smarduch
2014-12-15 7:27 ` [PATCH v15 02/11] KVM: Add generic support for dirty page logging Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 03/11] KVM: x86: switch to kvm_get_dirty_log_protect Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 04/11] KVM: arm: Add ARMv7 API to flush TLBs Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 05/11] KVM: arm: Add initial dirty page locking support Mario Smarduch
2015-01-07 13:05 ` Christoffer Dall
2014-12-15 7:28 ` [PATCH v15 06/11] KVM: arm: dirty logging write protect support Mario Smarduch
2015-01-07 13:05 ` Christoffer Dall
2014-12-15 7:28 ` [PATCH v15 07/11] KVM: arm: page logging 2nd stage fault handling Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 08/11] KVM: arm64: ARMv8 header changes for page logging Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 09/11] KVM: arm64: Add HYP interface to flush VM Stage 1/2 TLB entires Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 10/11] KVM: arm/arm64: Enable Dirty Page logging for ARMv8 Mario Smarduch
2015-01-07 12:47 ` Christoffer Dall [this message]
2015-01-08 1:51 ` Mario Smarduch
2015-01-08 10:56 ` Christoffer Dall
2015-01-08 16:30 ` Mario Smarduch
2014-12-15 7:28 ` [PATCH v15 11/11] KVM: arm/arm64: Add support to dissolve huge PUD Mario Smarduch
2015-01-07 13:05 ` Christoffer Dall
2015-01-08 3:01 ` Mario Smarduch
2015-01-08 11:32 ` Christoffer Dall
2015-01-08 16:41 ` Mario Smarduch
2015-01-09 10:23 ` Christoffer Dall
2015-01-08 16:42 ` Mario Smarduch
2014-12-18 2:07 ` [RESEND PATCH v15 07/11] KVM: arm: page logging 2nd stage fault handling Mario Smarduch
2015-01-07 12:38 ` Christoffer Dall
2015-01-08 1:43 ` Mario Smarduch
2015-01-08 10:45 ` Christoffer Dall
2015-01-08 16:28 ` Mario Smarduch
2015-01-09 10:24 ` Christoffer Dall
2015-01-10 4:38 ` Mario Smarduch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150107124744.GC21092@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).