linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Wed, 7 Jan 2015 16:20:37 -0800	[thread overview]
Message-ID: <20150108002037.GS13010@atomide.com> (raw)
In-Reply-To: <20150105172718.GJ19336@saruman>

* Felipe Balbi <balbi@ti.com> [150105 09:30]:
> On Mon, Jan 05, 2015 at 10:32:29AM -0600, Nishanth Menon wrote:
> > TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> > a fan (such as AFB02505HHB) over J1 connector for various purposes.
> > Provide device tree node to enable the same.
> > 
> > Signed-off-by: Nishanth Menon <nm@ti.com>
> 
> have already reviewed this one previously:
> 
> Reviewed-by: Felipe Balbi <balbi@ti.com>

Applying this into omap-for-v3.20/dt instead of the
earlier version thanks.

Tony

> > ---
> > V4: Change format of the speed-map used.
> > V3: https://patchwork.kernel.org/patch/5562121/
> > V2: https://patchwork.kernel.org/patch/5445111/
> > V1: https://patchwork.kernel.org/patch/5444911/
> > 
> > Enable and disable can be controlled by (post the RPM, it finds
> > closest match - even a 1 will do)
> > 
> > echo '13000' > /sys/class/hwmon/hwmon0/fan1_target
> > and
> > echo '0' > /sys/class/hwmon/hwmon0/fan1_target
> > 
> > Test log: http://slexy.org/view/s2T0ajh46z
> > 
> > requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> > Applies on v3.19-rc1
> > 
> >  arch/arm/boot/dts/am57xx-beagle-x15.dts |   14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> > index 6c2e8e4..c5d4cea 100644
> > --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> > +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> > @@ -80,6 +80,14 @@
> >  			default-state = "off";
> >  		};
> >  	};
> > +
> > +	gpio_fan: gpio_fan {
> > +		/* Based on 5v 500mA AFB02505HHB */
> > +		compatible = "gpio-fan";
> > +		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> > +		gpio-fan,speed-map = <0     0>,
> > +				     <13000 1>;
> > +	};
> >  };
> >  
> >  &dra7_pmx_core {
> > @@ -394,6 +402,12 @@
> >  			wakeup-source;
> >  			ti,palmas-long-press-seconds = <12>;
> >  		};
> > +
> > +		tps659038_gpio: tps659038_gpio {
> > +			compatible = "ti,palmas-gpio";
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +		};
> >  	};
> >  
> >  	tmp102: tmp102 at 48 {
> > -- 
> > 1.7.9.5
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> -- 
> balbi

  reply	other threads:[~2015-01-08  0:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-05 16:32 [PATCH V4] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node Nishanth Menon
2015-01-05 17:27 ` Felipe Balbi
2015-01-08  0:20   ` Tony Lindgren [this message]
2015-01-05 17:27 ` Felipe Balbi
2015-01-05 17:33   ` Nishanth Menon
2015-01-05 17:45     ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150108002037.GS13010@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).