linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/21] ARM: omap: convert wakeupgen to stacked domains
Date: Wed, 14 Jan 2015 14:28:14 -0800	[thread overview]
Message-ID: <20150114222814.GU2419@atomide.com> (raw)
In-Reply-To: <1421087187-26988-14-git-send-email-marc.zyngier@arm.com>

* Marc Zyngier <marc.zyngier@arm.com> [150112 10:30]:
> OMAP4/5 has been (ab)using the gic_arch_extn to provide
> wakeup from suspend, and it makes a lot of sense to convert
> this code to use stacked domains instead.
> 
> This patch does just this, updating the DT files to actually
> reflect what the HW provides.
> 
> BIG FAT WARNING: because the DTs were so far lying by not
> exposing the WUGEN HW block, kernels with this patch applied
> won't have any suspend-resume facility when booted with old DTs,
> and old kernels with updated DTs won't even boot.
> 
> On a platform with this patch applied, the system looks like
> this:
> 
> root at bacon-fat:~# cat /proc/interrupts
>             CPU0       CPU1
>  16:          0          0     WUGEN  37  gp_timer
>  19:     233799     155916       GIC  27  arch_timer
>  23:          0          0     WUGEN   9  l3-dbg-irq
>  24:          1          0     WUGEN  10  l3-app-irq
>  27:        282          0     WUGEN  13  omap-dma-engine
>  44:          0          0  4ae10000.gpio  13  DMA

FYI, the legacy irq numbers are now all wrong since commit
9a1091ef0017 ("irqchip: gic: Support hierarchy irq domain.").

Started a separate thread "Regression with legacy IRQ numbers
caused by 9a1091ef0017" on it, will give these a try once
that's sorted out.

Regards,

Tony

  reply	other threads:[~2015-01-14 22:28 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12 18:26 [PATCH v3 00/21] irqchip: gic: killing gic_arch_extn and co, slowly Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 01/21] ARM: tegra: irq: nuke leftovers from non-DT support Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 02/21] irqchip: tegra: add DT-based support for legacy interrupt controller Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 03/21] ARM: tegra: skip gic_arch_extn setup if DT has a LIC node Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 04/21] ARM: tegra: update DTs to expose legacy interrupt controller Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 05/21] DT: tegra: add binding for the " Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 06/21] ARM: tegra: remove old LIC support Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 07/21] genirq: Add irqchip_set_wake_parent Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 08/21] irqchip: crossbar: convert dra7 crossbar to stacked domains Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 09/21] DT: update ti,irq-crossbar binding Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 10/21] irqchip: GIC: get rid of routable domain Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 11/21] DT: arm,gic: kill arm,routable-irqs Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 12/21] DT: omap4/5: add binding for the wake-up generator Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 13/21] ARM: omap: convert wakeupgen to stacked domains Marc Zyngier
2015-01-14 22:28   ` Tony Lindgren [this message]
2015-01-15 14:28     ` Marc Zyngier
2015-01-15 14:40       ` Nishanth Menon
2015-01-15 14:50         ` Marc Zyngier
2015-01-15 17:04           ` Tony Lindgren
2015-01-15 17:28             ` Marc Zyngier
2015-01-15 17:57               ` Tony Lindgren
2015-01-15 18:12                 ` Tony Lindgren
2015-01-12 18:26 ` [PATCH v3 14/21] ARM: imx6: convert GPC " Marc Zyngier
2015-01-12 19:00   ` Stefan Agner
2015-01-13 18:34     ` Marc Zyngier
2015-01-13  6:09   ` Linus Walleij
2015-01-13 18:36     ` Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 15/21] ARM: exynos4/5: convert pmu wakeup " Marc Zyngier
2015-01-15  6:41   ` [v3,15/21] " Pankaj Dubey
2015-01-16 19:22     ` Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 16/21] DT: exynos: update PMU binding Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 17/21] irqchip: gic: add an entry point to set up irqchip flags Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 18/21] ARM: shmobile: remove use of gic_arch_extn.irq_set_wake Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 19/21] ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 20/21] ARM: zynq: " Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 21/21] irqchip: gic: Drop support for gic_arch_extn Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150114222814.GU2419@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).