From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver
Date: Wed, 14 Jan 2015 17:02:56 -0800 [thread overview]
Message-ID: <20150115010256.GC9134@dtor-ws> (raw)
In-Reply-To: <1419027470-7969-2-git-send-email-jonathar@broadcom.com>
Hi Jonathan,
On Fri, Dec 19, 2014 at 02:17:49PM -0800, Jonathan Richardson wrote:
> + if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
> + if (val < 1 || val > 256) {
> + dev_err(dev, "scanning_period must be [1-256]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.scanning_period = val;
> + }
> +
> + if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
> + if (val < 0 || val > 255) {
> + dev_err(dev, "debounce_timeout must be [0-255]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.debounce_timeout = val;
> + }
> +
> + if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
> + if (val < 0 || val > 11) {
> + dev_err(dev, "settling_timeout must be [0-11]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.settling_timeout = val;
> + }
> +
> + if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
> + if (val < 0 || val > 255) {
> + dev_err(dev, "touch_timeout must be [0-255]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.touch_timeout = val;
> + }
> +
> + if (of_property_read_u32(np, "average_data", &val) >= 0) {
> + if (val < 0 || val > 8) {
> + dev_err(dev, "average_data must be [0-8]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.average_data = val;
> + }
> +
> + if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
> + if (val < 0 || val > 31) {
> + dev_err(dev, "fifo_threshold must be [0-31]\n");
> + return -EINVAL;
> + }
> + priv->cfg_params.fifo_threshold = val;
> + }
I think these are dveice specific and thus should have "brcm," prefix.
> +
> + priv->ts_rotation = TS_ROTATION_0;
> + if (of_property_read_u32(np, "ts-rotation", &val) >= 0) {
> + priv->ts_rotation = val;
> + dev_dbg(dev, "ts rotation [%d] degrees\n",
> + 90 * priv->ts_rotation);
> + }
This I am not quite sure about - if we want rotation or swap+invert. You
are CCed on another email (tsc2007) that talks about need of generic
touchscreen transforms in input core/of bindings.
Thanks.
--
Dmitry
next prev parent reply other threads:[~2015-01-15 1:02 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Jonathan Richardson <jonathar@broadcom.com>
2014-09-16 19:58 ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58 ` [PATCH 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-17 0:00 ` Mark Rutland
2014-09-18 23:33 ` Jonathan Richardson
2014-09-16 19:58 ` [PATCH 2/6] clk: Clock driver " Jonathan Richardson
2014-09-17 0:47 ` Mark Rutland
2014-09-18 23:43 ` Jonathan Richardson
2014-09-16 19:58 ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-16 19:58 ` [PATCH 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58 ` [PATCH 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-16 19:58 ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-18 22:31 ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Hauke Mehrtens
2014-09-18 22:39 ` Florian Fainelli
2014-09-18 22:54 ` Hauke Mehrtens
2014-09-19 0:58 ` Scott Branden
2014-09-23 21:17 ` [PATCH v2 " Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 2/6] clk: Clock driver " Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-23 21:17 ` [PATCH v2 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-25 21:04 ` [PATCH v2 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-09-25 21:22 ` Florian Fainelli
2014-09-26 0:14 ` Florian Fainelli
2014-09-26 0:28 ` Jonathan Richardson
2014-09-26 0:34 ` Florian Fainelli
2014-12-18 1:59 ` [PATCH 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-18 1:59 ` [PATCH 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-18 2:14 ` Joe Perches
2014-12-19 19:51 ` Jonathan Richardson
2014-12-19 19:56 ` Dmitry Torokhov
2014-12-18 1:59 ` [PATCH 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2014-12-19 22:17 ` [PATCH v2 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-19 22:17 ` [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-19 22:26 ` Joe Perches
2014-12-19 23:03 ` Jonathan Richardson
2015-01-01 0:55 ` Jonathan Richardson
2015-01-15 1:08 ` Florian Fainelli
2015-01-15 19:19 ` Jonathan Richardson
2015-01-15 1:02 ` Dmitry Torokhov [this message]
2015-01-15 5:44 ` Scott Branden
2015-01-15 6:07 ` Dmitry Torokhov
2015-01-15 19:51 ` Jonathan Richardson
2015-02-11 18:45 ` Jonathan Richardson
2015-02-24 23:18 ` Dmitry Torokhov
2015-02-27 1:02 ` Jonathan Richardson
2015-02-24 23:29 ` Dmitry Torokhov
2015-03-02 19:13 ` Jonathan Richardson
2014-12-19 22:17 ` [PATCH v2 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2015-02-24 19:13 ` [PATCH 0/1] Enable Broadcom Cygnus BCM958305K Jonathan Richardson
2015-02-24 19:13 ` [PATCH 1/1] ARM: dts: " Jonathan Richardson
2015-03-02 22:41 ` [PATCH RESEND 0/1] " Jonathan Richardson
2015-03-02 22:41 ` [PATCH RESEND 1/1] ARM: dts: " Jonathan Richardson
2015-03-02 23:45 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150115010256.GC9134@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).