From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/21] ARM: omap: convert wakeupgen to stacked domains
Date: Thu, 15 Jan 2015 09:04:43 -0800 [thread overview]
Message-ID: <20150115170443.GF18552@atomide.com> (raw)
In-Reply-To: <87sifcgksy.fsf@approximate.cambridge.arm.com>
* Marc Zyngier <marc.zyngier@arm.com> [150115 06:53]:
> On Thu, Jan 15 2015 at 2:40:16 pm GMT, Nishanth Menon <nm@ti.com> wrote:
> > On 14:28-20150115, Marc Zyngier wrote:
> >> Assuming the workaround I posted earlier works, the OMAP/DRA7 part of
> >> this series is going to require some rework too (I need to know where
> >> these legacy interrupts are attached: crossbar, WUGEN, or GIC?).
> >>
> > crossbar will never work with legacy static interrupts anyways - since
> > there was never a static interrupt possible - I believe we had removed
> > all the legacy hardcoded interrupt definitions for DRA7. ideally, they
> > should all be dt only now.
>
> Yes, I guessed as much after looking at the DRA7XX hwmod.
>
> So only OMAP4/5 is b0rken at the moment. I can probably work around it
> as I did in this example patch, just by changing the compatible strings
> for the xlate callback. Very ugly.
For the -rc, it seems the wakeupen still needs a fix as based on grepping
for OMAP44XX_IRQ_GIC_START. Got any great ideas for that?
Regards,
Tony
next prev parent reply other threads:[~2015-01-15 17:04 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 18:26 [PATCH v3 00/21] irqchip: gic: killing gic_arch_extn and co, slowly Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 01/21] ARM: tegra: irq: nuke leftovers from non-DT support Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 02/21] irqchip: tegra: add DT-based support for legacy interrupt controller Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 03/21] ARM: tegra: skip gic_arch_extn setup if DT has a LIC node Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 04/21] ARM: tegra: update DTs to expose legacy interrupt controller Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 05/21] DT: tegra: add binding for the " Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 06/21] ARM: tegra: remove old LIC support Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 07/21] genirq: Add irqchip_set_wake_parent Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 08/21] irqchip: crossbar: convert dra7 crossbar to stacked domains Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 09/21] DT: update ti,irq-crossbar binding Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 10/21] irqchip: GIC: get rid of routable domain Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 11/21] DT: arm,gic: kill arm,routable-irqs Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 12/21] DT: omap4/5: add binding for the wake-up generator Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 13/21] ARM: omap: convert wakeupgen to stacked domains Marc Zyngier
2015-01-14 22:28 ` Tony Lindgren
2015-01-15 14:28 ` Marc Zyngier
2015-01-15 14:40 ` Nishanth Menon
2015-01-15 14:50 ` Marc Zyngier
2015-01-15 17:04 ` Tony Lindgren [this message]
2015-01-15 17:28 ` Marc Zyngier
2015-01-15 17:57 ` Tony Lindgren
2015-01-15 18:12 ` Tony Lindgren
2015-01-12 18:26 ` [PATCH v3 14/21] ARM: imx6: convert GPC " Marc Zyngier
2015-01-12 19:00 ` Stefan Agner
2015-01-13 18:34 ` Marc Zyngier
2015-01-13 6:09 ` Linus Walleij
2015-01-13 18:36 ` Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 15/21] ARM: exynos4/5: convert pmu wakeup " Marc Zyngier
2015-01-15 6:41 ` [v3,15/21] " Pankaj Dubey
2015-01-16 19:22 ` Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 16/21] DT: exynos: update PMU binding Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 17/21] irqchip: gic: add an entry point to set up irqchip flags Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 18/21] ARM: shmobile: remove use of gic_arch_extn.irq_set_wake Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 19/21] ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 20/21] ARM: zynq: " Marc Zyngier
2015-01-12 18:26 ` [PATCH v3 21/21] irqchip: gic: Drop support for gic_arch_extn Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150115170443.GF18552@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).