From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 07/17] ARM64 / ACPI: Disable ACPI if FADT revision is less than 5.1
Date: Fri, 16 Jan 2015 14:33:37 +0000 [thread overview]
Message-ID: <20150116143337.GA14505@red-moon> (raw)
In-Reply-To: <1421247905-3749-8-git-send-email-hanjun.guo@linaro.org>
On Wed, Jan 14, 2015 at 03:04:55PM +0000, Hanjun Guo wrote:
> FADT Major.Minor version was introduced in ACPI 5.1, it is the same
> as ACPI version.
>
> In ACPI 5.1, some major gaps are fixed for ARM, such as updates in
> MADT table for GIC and SMP init, without those updates, we can not
> get the MPIDR for SMP init, and GICv2/3 related init information, so
> we can't boot arm64 ACPI properly with table versions predating 5.1.
>
> If firmware provides ACPI tables with ACPI version less than 5.1,
> OS will be messed up with those information and have no way to init
Nit: "that information"
or
"...OS has no way to retrieve the configuration data that is necessary
to init SMP boot protocol and the GIC properly, so.."
> smp and GIC, so disable ACPI if we get an FADT table with version
> less that 5.1.
>
Patch should be reordered in the series and must be sequenced before
patch 5 for bisectability (that patch implements DT unflattening if ACPI
is disabled), or squashed with previous patches.
Lorenzo
> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> Tested-by: Yijing Wang <wangyijing@huawei.com>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
> arch/arm64/kernel/acpi.c | 31 ++++++++++++++++++++++++++++++-
> 1 file changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index 39a1655..4177758 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -13,6 +13,8 @@
> * published by the Free Software Foundation.
> */
>
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
> #include <linux/init.h>
> #include <linux/acpi.h>
> #include <linux/cpumask.h>
> @@ -49,10 +51,32 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
> early_memunmap(map, size);
> }
>
> +static int __init acpi_parse_fadt(struct acpi_table_header *table)
> +{
> + struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
> +
> + /*
> + * Revision in table header is the FADT Major revision,
> + * and there is a minor revision of FADT which was introduced
> + * by ACPI 5.1, we only deal with ACPI 5.1 or newer revision
> + * to get arm boot flags, or we will disable ACPI.
> + */
> + if (table->revision > 5 ||
> + (table->revision == 5 && fadt->minor_revision >= 1))
> + return 0;
> +
> + pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n",
> + table->revision, fadt->minor_revision);
> + disable_acpi();
> +
> + return -EINVAL;
> +}
> +
> /*
> * acpi_boot_table_init() called from setup_arch(), always.
> * 1. find RSDP and get its address, and then find XSDT
> * 2. extract all tables and checksums them all
> + * 3. check ACPI FADT revision
> *
> * We can parse ACPI boot-time tables such as MADT after
> * this function is called.
> @@ -64,8 +88,13 @@ void __init acpi_boot_table_init(void)
> return;
>
> /* Initialize the ACPI boot-time table parser. */
> - if (acpi_table_init())
> + if (acpi_table_init()) {
> disable_acpi();
> + return;
> + }
> +
> + if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
> + pr_err("Can't find FADT or error happened during parsing FADT\n");
> }
>
> static int __init parse_acpi(char *arg)
> --
> 1.9.1
>
>
next prev parent reply other threads:[~2015-01-16 14:33 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 15:04 [PATCH v7 00/17] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2015-01-14 15:04 ` [PATCH v7 01/17] arm64: allow late use of early_ioremap Hanjun Guo
2015-01-15 18:44 ` Mark Langsdorf
2015-01-14 15:04 ` [PATCH v7 02/17] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2015-01-15 18:45 ` Mark Langsdorf
2015-01-14 15:04 ` [PATCH v7 03/17] ARM64 / ACPI: Introduce sleep-arm.c Hanjun Guo
2015-01-15 18:45 ` Mark Langsdorf
2015-01-14 15:04 ` [PATCH v7 04/17] ARM64 / ACPI: Introduce early_param for "acpi" and pass acpi=force to enable ACPI Hanjun Guo
2015-01-15 18:46 ` Mark Langsdorf
2015-01-19 11:42 ` Catalin Marinas
2015-01-19 11:55 ` Ard Biesheuvel
2015-01-19 13:51 ` Catalin Marinas
2015-01-19 14:00 ` Ard Biesheuvel
2015-01-19 14:22 ` Catalin Marinas
2015-01-19 15:13 ` Grant Likely
2015-01-19 16:59 ` Jon Masters
2015-01-19 17:52 ` Catalin Marinas
2015-01-19 18:01 ` Mark Rutland
2015-01-20 9:29 ` Hanjun Guo
2015-01-20 10:56 ` Catalin Marinas
2015-01-20 11:10 ` Mark Rutland
2015-01-20 12:17 ` Hanjun Guo
2015-01-20 12:31 ` Leif Lindholm
2015-01-20 19:20 ` Stefano Stabellini
2015-01-21 9:43 ` Parth Dixit
2015-01-21 15:23 ` Catalin Marinas
2015-01-21 15:29 ` Jon Masters
2015-01-21 15:42 ` Catalin Marinas
2015-01-21 15:56 ` Graeme Gregory
2015-01-21 16:05 ` Jon Masters
2015-01-21 16:16 ` Catalin Marinas
2015-01-21 16:51 ` Parth Dixit
2015-01-21 16:10 ` Stefano Stabellini
2015-01-22 12:29 ` Daniel Kiper
2015-01-28 17:58 ` [Linaro-acpi] " Timur Tabi
2015-01-28 18:08 ` Catalin Marinas
2015-01-28 18:08 ` Timur Tabi
2015-01-28 18:14 ` Catalin Marinas
2015-01-28 18:18 ` Timur Tabi
2015-01-29 15:19 ` Catalin Marinas
2015-01-29 18:20 ` Ard Biesheuvel
2015-01-29 18:21 ` Timur Tabi
2015-01-29 18:28 ` Ard Biesheuvel
2015-01-29 18:34 ` Timur Tabi
2015-01-29 18:44 ` Jon Masters
2015-01-29 23:11 ` Catalin Marinas
2015-01-29 23:16 ` Jon Masters
2015-01-29 23:30 ` Catalin Marinas
2015-01-30 11:13 ` Catalin Marinas
2015-01-30 14:48 ` Timur Tabi
2015-01-30 15:12 ` Ard Biesheuvel
2015-01-14 15:04 ` [PATCH v7 05/17] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2015-01-15 18:46 ` Mark Langsdorf
2015-01-19 11:45 ` Catalin Marinas
2015-01-14 15:04 ` [PATCH v7 06/17] ARM64 / ACPI: Make PCI optional for ACPI on ARM64 Hanjun Guo
2015-01-15 18:46 ` Mark Langsdorf
2015-01-16 9:49 ` Catalin Marinas
2015-01-18 6:25 ` Hanjun Guo
2015-01-18 6:31 ` Jon Masters
2015-01-18 6:46 ` Hanjun Guo
2015-01-18 9:29 ` Graeme Gregory
2015-01-18 12:32 ` Jon Masters
2015-01-19 4:26 ` Hanjun Guo
2015-01-19 10:37 ` Catalin Marinas
2015-01-19 10:42 ` Catalin Marinas
2015-01-20 2:39 ` Hanjun Guo
2015-01-20 11:00 ` Catalin Marinas
2015-01-20 11:56 ` Hanjun Guo
2015-01-20 12:26 ` [Linaro-acpi] " Tomasz Nowicki
2015-01-20 15:10 ` Catalin Marinas
2015-01-14 15:04 ` [PATCH v7 07/17] ARM64 / ACPI: Disable ACPI if FADT revision is less than 5.1 Hanjun Guo
2015-01-15 18:47 ` Mark Langsdorf
2015-01-16 14:33 ` Lorenzo Pieralisi [this message]
2015-01-18 5:49 ` Hanjun Guo
2015-01-19 11:50 ` Catalin Marinas
2015-01-20 3:05 ` Hanjun Guo
2015-01-14 15:04 ` [PATCH v7 08/17] ARM64 / ACPI: Get PSCI flags in FADT for PSCI init Hanjun Guo
2015-01-15 18:47 ` Mark Langsdorf
2015-01-14 15:04 ` [PATCH v7 09/17] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2015-01-15 18:47 ` Mark Langsdorf
2015-01-14 15:04 ` [PATCH v7 10/17] ARM64 / ACPI: Parse MADT for SMP initialization Hanjun Guo
2015-01-15 18:48 ` Mark Langsdorf
2015-01-16 18:18 ` Lorenzo Pieralisi
2015-01-20 13:09 ` Hanjun Guo
2015-01-20 15:16 ` Lorenzo Pieralisi
2015-01-14 15:04 ` [PATCH v7 11/17] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2015-01-15 18:48 ` Mark Langsdorf
2015-01-20 11:17 ` Catalin Marinas
2015-01-20 12:26 ` Hanjun Guo
2015-01-20 16:16 ` Lorenzo Pieralisi
2015-01-14 15:05 ` [PATCH v7 12/17] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2015-01-15 18:48 ` Mark Langsdorf
2015-01-16 10:45 ` Marc Zyngier
2015-01-14 15:05 ` [PATCH v7 13/17] ARM64 / ACPI: Add GICv2 specific ACPI boot support Hanjun Guo
2015-01-15 18:50 ` Mark Langsdorf
2015-01-16 11:15 ` Marc Zyngier
2015-01-16 13:54 ` Grant Likely
2015-01-16 14:37 ` Marc Zyngier
2015-01-22 12:46 ` Hanjun Guo
2015-01-22 14:46 ` Marc Zyngier
2015-01-23 9:38 ` Hanjun Guo
2015-01-27 16:12 ` Grant Likely
2015-01-29 15:29 ` Catalin Marinas
2015-01-29 16:06 ` Tomasz Nowicki
2015-01-20 10:40 ` Tomasz Nowicki
2015-01-20 13:05 ` Jon Masters
2015-01-14 15:05 ` [PATCH v7 14/17] ARM64 / ACPI: Parse GTDT to initialize arch timer Hanjun Guo
2015-01-15 18:50 ` Mark Langsdorf
2015-01-14 15:05 ` [PATCH v7 15/17] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2015-01-15 18:50 ` Mark Langsdorf
2015-01-14 15:05 ` [PATCH v7 16/17] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2015-01-15 18:50 ` Mark Langsdorf
2015-01-14 15:05 ` [PATCH v7 17/17] Documentation: ACPI for ARM64 Hanjun Guo
2015-01-15 18:54 ` Mark Langsdorf
2015-01-15 16:26 ` [PATCH v7 00/17] Introduce ACPI for ARM64 based on ACPI 5.1 Grant Likely
2015-01-15 18:23 ` Catalin Marinas
2015-01-15 19:02 ` Mark Brown
2015-01-15 20:04 ` Jason Cooper
2015-01-15 20:31 ` Mark Brown
2015-01-15 20:51 ` Jason Cooper
2015-01-16 11:49 ` Mark Brown
2015-01-16 7:24 ` Hanjun Guo
2015-01-16 10:10 ` Catalin Marinas
2015-01-16 12:05 ` Mark Brown
2015-01-16 12:29 ` Will Deacon
2015-01-16 16:54 ` Mark Brown
2015-01-18 6:36 ` Hanjun Guo
2015-01-15 21:31 ` Al Stone
2015-01-15 21:38 ` Jon Masters
2015-01-16 10:20 ` Catalin Marinas
2015-01-16 15:17 ` [Linaro-acpi] " Al Stone
2015-01-16 15:23 ` Al Stone
2015-01-16 15:44 ` Suravee Suthikulpanit
2015-01-16 7:17 ` Hanjun Guo
2015-01-16 10:04 ` Catalin Marinas
2015-01-16 14:45 ` Tom Lendacky
2015-01-16 14:55 ` Will Deacon
2015-01-16 15:14 ` Arnd Bergmann
2015-01-16 15:25 ` Catalin Marinas
2015-01-16 15:33 ` Will Deacon
2015-01-16 15:40 ` Arnd Bergmann
2015-01-16 15:43 ` [Linaro-acpi] " Arnd Bergmann
2015-01-16 15:49 ` Will Deacon
2015-01-16 15:53 ` [Linaro-acpi] " Arnd Bergmann
2015-01-17 17:53 ` Rob Herring
2015-01-16 17:12 ` Tom Lendacky
2015-01-16 15:16 ` Tom Lendacky
2015-01-16 16:29 ` Grant Likely
2015-01-16 17:20 ` [Linaro-acpi] " Arnd Bergmann
2015-01-17 11:52 ` Catalin Marinas
2015-01-15 18:58 ` Jon Masters
2015-01-15 19:49 ` Mark Langsdorf
2015-01-16 8:37 ` Hanjun Guo
2015-01-15 21:33 ` Suravee Suthikulanit
2015-01-27 17:46 ` Timur Tabi
2015-01-28 13:53 ` Hanjun Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150116143337.GA14505@red-moon \
--to=lorenzo.pieralisi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).