linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/12] mfd: syscon: Add atmel-matrix registers definition
Date: Sun, 18 Jan 2015 12:52:59 +0000	[thread overview]
Message-ID: <20150118125259.GW3574@x1> (raw)
In-Reply-To: <1421252524-24452-2-git-send-email-alexandre.belloni@free-electrons.com>

On Wed, 14 Jan 2015, Alexandre Belloni wrote:

> From: Boris Brezillon <boris.brezillon@free-electrons.com>
> 
> AT91 SoCs have a memory range reserved for internal bus configuration.
> Expose those registers so that drivers can make use of the matrix syscon
> declared in at91 DTs.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
>  include/linux/mfd/syscon/atmel-matrix.h | 117 ++++++++++++++++++++++++++++++++
>  1 file changed, 117 insertions(+)
>  create mode 100644 include/linux/mfd/syscon/atmel-matrix.h

Applied, thanks.

> diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h
> new file mode 100644
> index 000000000000..8293c3e2a82a
> --- /dev/null
> +++ b/include/linux/mfd/syscon/atmel-matrix.h
> @@ -0,0 +1,117 @@
> +/*
> + *  Copyright (C) 2014 Atmel Corporation.
> + *
> + * Memory Controllers (MATRIX, EBI) - System peripherals registers.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H
> +#define _LINUX_MFD_SYSCON_ATMEL_MATRIX_H
> +
> +#define AT91SAM9260_MATRIX_MCFG			0x00
> +#define AT91SAM9260_MATRIX_SCFG			0x40
> +#define AT91SAM9260_MATRIX_PRS			0x80
> +#define AT91SAM9260_MATRIX_MRCR			0x100
> +#define AT91SAM9260_MATRIX_EBICSA		0x11c
> +
> +#define AT91SAM9261_MATRIX_MRCR			0x0
> +#define AT91SAM9261_MATRIX_SCFG			0x4
> +#define AT91SAM9261_MATRIX_TCR			0x24
> +#define AT91SAM9261_MATRIX_EBICSA		0x30
> +#define AT91SAM9261_MATRIX_USBPUCR		0x34
> +
> +#define AT91SAM9263_MATRIX_MCFG			0x00
> +#define AT91SAM9263_MATRIX_SCFG			0x40
> +#define AT91SAM9263_MATRIX_PRS			0x80
> +#define AT91SAM9263_MATRIX_MRCR			0x100
> +#define AT91SAM9263_MATRIX_TCR			0x114
> +#define AT91SAM9263_MATRIX_EBI0CSA		0x120
> +#define AT91SAM9263_MATRIX_EBI1CSA		0x124
> +
> +#define AT91SAM9RL_MATRIX_MCFG			0x00
> +#define AT91SAM9RL_MATRIX_SCFG			0x40
> +#define AT91SAM9RL_MATRIX_PRS			0x80
> +#define AT91SAM9RL_MATRIX_MRCR			0x100
> +#define AT91SAM9RL_MATRIX_TCR			0x114
> +#define AT91SAM9RL_MATRIX_EBICSA		0x120
> +
> +#define AT91SAM9G45_MATRIX_MCFG			0x00
> +#define AT91SAM9G45_MATRIX_SCFG			0x40
> +#define AT91SAM9G45_MATRIX_PRS			0x80
> +#define AT91SAM9G45_MATRIX_MRCR			0x100
> +#define AT91SAM9G45_MATRIX_TCR			0x110
> +#define AT91SAM9G45_MATRIX_DDRMPR		0x118
> +#define AT91SAM9G45_MATRIX_EBICSA		0x128
> +
> +#define AT91SAM9N12_MATRIX_MCFG			0x00
> +#define AT91SAM9N12_MATRIX_SCFG			0x40
> +#define AT91SAM9N12_MATRIX_PRS			0x80
> +#define AT91SAM9N12_MATRIX_MRCR			0x100
> +#define AT91SAM9N12_MATRIX_EBICSA		0x118
> +
> +#define AT91SAM9X5_MATRIX_MCFG			0x00
> +#define AT91SAM9X5_MATRIX_SCFG			0x40
> +#define AT91SAM9X5_MATRIX_PRS			0x80
> +#define AT91SAM9X5_MATRIX_MRCR			0x100
> +#define AT91SAM9X5_MATRIX_EBICSA		0x120
> +
> +#define SAMA5D3_MATRIX_MCFG			0x00
> +#define SAMA5D3_MATRIX_SCFG			0x40
> +#define SAMA5D3_MATRIX_PRS			0x80
> +#define SAMA5D3_MATRIX_MRCR			0x100
> +
> +#define AT91_MATRIX_MCFG(o, x)			((o) + ((x) * 0x4))
> +#define AT91_MATRIX_ULBT			GENMASK(2, 0)
> +#define AT91_MATRIX_ULBT_INFINITE		(0 << 0)
> +#define AT91_MATRIX_ULBT_SINGLE			(1 << 0)
> +#define AT91_MATRIX_ULBT_FOUR			(2 << 0)
> +#define AT91_MATRIX_ULBT_EIGHT			(3 << 0)
> +#define AT91_MATRIX_ULBT_SIXTEEN		(4 << 0)
> +
> +#define AT91_MATRIX_SCFG(o, x)			((o) + ((x) * 0x4))
> +#define AT91_MATRIX_SLOT_CYCLE			GENMASK(7,  0)
> +#define AT91_MATRIX_DEFMSTR_TYPE		GENMASK(17, 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_NONE		(0 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_LAST		(1 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED		(2 << 16)
> +#define AT91_MATRIX_FIXED_DEFMSTR		GENMASK(20, 18)
> +#define AT91_MATRIX_ARBT			GENMASK(25, 24)
> +#define AT91_MATRIX_ARBT_ROUND_ROBIN		(0 << 24)
> +#define AT91_MATRIX_ARBT_FIXED_PRIORITY		(1 << 24)
> +
> +#define AT91_MATRIX_ITCM_SIZE			GENMASK(3, 0)
> +#define AT91_MATRIX_ITCM_0			(0 << 0)
> +#define AT91_MATRIX_ITCM_16			(5 << 0)
> +#define AT91_MATRIX_ITCM_32			(6 << 0)
> +#define AT91_MATRIX_ITCM_64			(7 << 0)
> +#define	AT91_MATRIX_DTCM_SIZE			GENMASK(7, 4)
> +#define	AT91_MATRIX_DTCM_0			(0 << 4)
> +#define	AT91_MATRIX_DTCM_16			(5 << 4)
> +#define AT91_MATRIX_DTCM_32			(6 << 4)
> +#define AT91_MATRIX_DTCM_64			(7 << 4)
> +
> +#define AT91_MATRIX_PRAS(o, x)			((o) + ((x) * 0x8))
> +#define AT91_MATRIX_PRBS(o, x)			((o) + ((x) * 0x8) + 0x4)
> +#define AT91_MATRIX_MPR(x)			GENMASK(((x) * 0x4) + 1, ((x) * 0x4))
> +
> +#define AT91_MATRIX_RCB(x)			BIT(x)
> +
> +#define AT91_MATRIX_CSA(cs, val)		(val << (cs))
> +#define AT91_MATRIX_DBPUC			BIT(8)
> +#define AT91_MATRIX_DBPDC			BIT(9)
> +#define AT91_MATRIX_VDDIOMSEL			BIT(16)
> +#define AT91_MATRIX_VDDIOMSEL_1_8V		(0 << 16)
> +#define AT91_MATRIX_VDDIOMSEL_3_3V		(1 << 16)
> +#define AT91_MATRIX_EBI_IOSR			BIT(17)
> +#define AT91_MATRIX_DDR_IOSR			BIT(18)
> +#define AT91_MATRIX_NFD0_SELECT			BIT(24)
> +#define AT91_MATRIX_DDR_MP_EN			BIT(25)
> +#define AT91_MATRIX_EBI_NUM_CS			8
> +
> +#define AT91_MATRIX_USBPUCR_PUON		BIT(30)
> +
> +#endif /* _LINUX_MFD_SYSCON_ATMEL_MATRIX_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-01-18 12:52 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-14 16:21 [PATCH 00/12] Atmel matrix, SMC and UDC rework Alexandre Belloni
2015-01-14 16:21 ` [PATCH 01/12] mfd: syscon: Add atmel-matrix registers definition Alexandre Belloni
2015-01-18 12:52   ` Lee Jones [this message]
2015-01-18 13:11     ` Boris Brezillon
2015-01-19  8:16       ` Lee Jones
2015-01-14 16:21 ` [PATCH 02/12] mfd: syscon: Add Atmel Matrix bus DT binding documentation Alexandre Belloni
2015-01-18 12:53   ` Lee Jones
2015-01-14 16:21 ` [PATCH 03/12] mfd: syscon: Add atmel-smc registers definition Alexandre Belloni
2015-01-18 12:53   ` Lee Jones
2015-01-14 16:21 ` [PATCH 04/12] mfd: syscon: Add Atmel SMC binding doc Alexandre Belloni
2015-01-18 12:54   ` Lee Jones
2015-01-14 16:21 ` [PATCH 05/12] usb: gadget: at91_udc: Fix clock names Alexandre Belloni
2015-01-14 17:37   ` Felipe Balbi
2015-01-14 16:21 ` [PATCH 06/12] usb: gadget: at91_udc: Drop uclk clock Alexandre Belloni
2015-01-14 17:37   ` Felipe Balbi
2015-01-14 16:21 ` [PATCH 07/12] usb: gadget: at91_udc: Document DT clocks and clock-names property Alexandre Belloni
2015-01-14 16:22 ` [PATCH 08/12] usb: gadget: at91_udc: Remove non-DT handling code Alexandre Belloni
2015-01-14 17:38   ` Felipe Balbi
2015-01-14 18:35     ` Alexandre Belloni
2015-01-14 18:39       ` Felipe Balbi
2015-01-14 16:22 ` [PATCH 09/12] usb: gadget: at91_udc: Simplify probe and remove functions Alexandre Belloni
2015-01-14 17:38   ` Felipe Balbi
2015-01-14 16:22 ` [PATCH 10/12] usb: gadget: at91_udc: Rework for multi-platform kernel support Alexandre Belloni
2015-01-14 17:38   ` Felipe Balbi
2015-01-14 16:22 ` [PATCH 11/12] usb: gadget: at91_udc: Update DT binding documentation Alexandre Belloni
2015-01-14 16:22 ` [PATCH 12/12] usb: gadget: at91_udc: Allocate udc instance Alexandre Belloni
2015-01-14 17:39   ` Felipe Balbi
2015-01-15 13:30 ` [PATCH 00/12] Atmel matrix, SMC and UDC rework Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150118125259.GW3574@x1 \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).