* [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator
@ 2014-12-26 7:09 Flora Fu
2014-12-26 7:09 ` [PATCH v4 1/6] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Flora Fu
` (5 more replies)
0 siblings, 6 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
The patch sets add support for MediaTek PMIC MT6397 MFD core and its regulator driver.
This is hardware layout for access PMIC MT6397 from AP SoC MT8135.
Between PMIC MT6397 and MT8135, the physical signal channel is SPI bus.
A specific hardware called PMIC Wrapper or PWRAP to handle access protocols in both PMIC and AP side.
+-----------------+ +---------------+
| | | |
| Mediatek AP SoC | | |
| (ex. MT8135) | | MT6397 |
| | | |
| +--------+ | (SPI bus) | +--------+ |
| | | |-----------| | | |
| | PMIC | |-----------| | PMIC | |
| | Wrapper| |-----------| | Wrapper| |
| | | |-----------| | | |
| +--------+ | | +--------+ |
| | | |
+-----------------+ +---------------+
This driver is based on kernel release 3.19.
Changes since v3
================
(1) Patch 1/6: PMIC Wrapper is the parent of MT6397 MFD. Use auxdata to pass regmap pointer as MFD's platform data.
(2) Patch 2/6: Update MT6397 MFD implmentation according to patch 1/6. Update MFD cells table: rtc, codec, clock for sub modules.
(3) Patch 4/6: Document for MT8135 PMIC wrapper.
(4) Patch 5/6: Document for MT6397 MFD.
(5) Patch 7/6: Device tree for MT8135 PMIC wrapper in mt8135.dtsi.
- nodes of clocks depend on mt8135 clocks
- nodes of resets depend on mt8135 reset controllers:
https://lkml.org/lkml/2014/11/3/134
https://lkml.org/lkml/2014/11/5/283
(6) Patch 6/6: Add device tree for MT6397 MFD and regulators in mt8135 board file.
v3:
https://lkml.org/lkml/2014/12/4/924
Changes since v2
================
(1) Patch 1/8: Update kernel config of MT8135 PMIC Wrapper. It needs to select REGMAP.
(2) Patch 2/8: Update patch of MT6397 MFD driver to fix defeat of coding styles.
(3) Patch 3/8: Update MT6397 regulator driver
- use standard helpers for ops ".set_voltage_sel", ".get_voltage_sel" and ".is_enabled"
- remove regulator's DT matching codes in the driver.
- fix defeat of coding styles.
(4) Patch 4/8: Update document for MT8135 PMIC wrapper.
(5) Patch 5/8: Update document for MT6397 MFD.
(6) Patch 6/8: Update document for MT6397 regulators.
(7) Patch 7/8: Update device tree for MT8135 PMIC wrapper in mt8135.dtsi.
(8) Patch 8/8: Add device tree for MT6397 MFD and regulators in mt8135-evbp1.dts board file.
v2:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307069.html
Changes since v1
================
(1) Patch 1/8: Add MT8135 PMIC wrapper driver for SoC's proprietary hardware.
(2) Patch 2/8: Update patch of MT6397 MFD driver to contain only MFD related codes and fix defeat of coding styles.
(3) Patch 3/8: Update MT6397 regulator driver
- use helpers and standard ways for specifying data in regulator description.
- add more comments to explaining why the driver implement its own regulator_ops for ".is_enabled", ".set_voltage_sel" and ".get_voltage_sel".
- update driver implement for coding styles.
(4) Patch 4/8: Add document for MT8135 PMIC wrapper.
(5) Patch 5/8: Update document for MT6397 MFD.
(6) Patch 6/8: Update document for MT6397 regulators.
(7) Patch 7/8: Add device tree for MT6397 MFD in mt8135.dtsi.
(8) Patch 8/8: Update device tree for MT6397 regulators in mt8135.dtsi.
Initial version (v1):
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/302984.html
Flora Fu (6):
soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC
mfd: MT6397: Add support for PMIC MT6397 MFD
dt-bindings:: Add document for MT8135 PMIC Wrapper
dt-bindings: Add document for MT6397 MFD
arm: dts: mt8135: Add support for MT8135 PMIC wrapper
arm: dts: mt8135: Add support for MT6397 MFD and regulator
Documentation/devicetree/bindings/mfd/mt6397.txt | 75 ++
.../soc/mediatek/mediatek,mt8135-pwrap.txt | 51 ++
arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++
arch/arm/boot/dts/mt8135.dtsi | 14 +
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6397-core.c | 94 +++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/mediatek/Kconfig | 12 +
drivers/soc/mediatek/Makefile | 1 +
drivers/soc/mediatek/mt8135-pmic-wrap.c | 855 +++++++++++++++++++++
drivers/soc/mediatek/mt8135-pmic-wrap.h | 138 ++++
include/linux/mfd/mt6397/core.h | 23 +
include/linux/mfd/mt6397/registers.h | 362 +++++++++
15 files changed, 1831 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6397.txt
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8135-pwrap.txt
create mode 100644 drivers/mfd/mt6397-core.c
create mode 100644 drivers/soc/mediatek/Kconfig
create mode 100644 drivers/soc/mediatek/Makefile
create mode 100644 drivers/soc/mediatek/mt8135-pmic-wrap.c
create mode 100644 drivers/soc/mediatek/mt8135-pmic-wrap.h
create mode 100644 include/linux/mfd/mt6397/core.h
create mode 100644 include/linux/mfd/mt6397/registers.h
--
1.8.1.1.dirty
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 1/6] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
2014-12-26 7:09 ` [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD Flora Fu
` (4 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Add PMIC wrapper of MT8135 to access MT6397 MFD.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/mediatek/Kconfig | 12 +
drivers/soc/mediatek/Makefile | 1 +
drivers/soc/mediatek/mt8135-pmic-wrap.c | 855 ++++++++++++++++++++++++++++++++
drivers/soc/mediatek/mt8135-pmic-wrap.h | 138 ++++++
6 files changed, 1008 insertions(+)
create mode 100644 drivers/soc/mediatek/Kconfig
create mode 100644 drivers/soc/mediatek/Makefile
create mode 100644 drivers/soc/mediatek/mt8135-pmic-wrap.c
create mode 100644 drivers/soc/mediatek/mt8135-pmic-wrap.h
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 76d6bd4..d8bde82 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,5 +1,6 @@
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 063113d..70042b2 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
new file mode 100644
index 0000000..746e030
--- /dev/null
+++ b/drivers/soc/mediatek/Kconfig
@@ -0,0 +1,12 @@
+#
+# MediaTek SoC drivers
+#
+config MT8135_PMIC_WRAP
+ tristate "MediaTek MT8135 PMIC Wrapper Support"
+ depends on ARCH_MEDIATEK
+ select REGMAP
+ help
+ Say yes here to add support for MediaTek MT8135 PMIC Wrapper.
+ PMIC wrapper is a proprietary hardware in MT8135 to make
+ communication protocols to access PMIC device.
+ This driver implement access protocols for MT8135.
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
new file mode 100644
index 0000000..49b9588
--- /dev/null
+++ b/drivers/soc/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MT8135_PMIC_WRAP) += mt8135-pmic-wrap.o
diff --git a/drivers/soc/mediatek/mt8135-pmic-wrap.c b/drivers/soc/mediatek/mt8135-pmic-wrap.c
new file mode 100644
index 0000000..3c35afc
--- /dev/null
+++ b/drivers/soc/mediatek/mt8135-pmic-wrap.c
@@ -0,0 +1,855 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/mt6397/registers.h>
+#include "mt8135-pmic-wrap.h"
+
+/* macro for wrapper status */
+#define PWRAP_GET_WACS0_WDATA(x) (((x) >> 0) & 0x0000ffff)
+#define PWRAP_GET_WACS0_ADR(x) (((x) >> 16) & 0x00007fff)
+#define PWRAP_GET_WACS0_WRITE(x) (((x) >> 31) & 0x00000001)
+#define PWRAP_GET_WACS0_RDATA(x) (((x) >> 0) & 0x0000ffff)
+#define PWRAP_GET_WACS0_FSM(x) (((x) >> 16) & 0x00000007)
+#define PWRAP_STATE_SYNC_IDLE0 (1 << 20)
+#define PWRAP_STATE_INIT_DONE0 (1 << 21)
+
+/* macro for WACS FSM */
+#define PWRAP_WACS_FSM_IDLE 0x00
+#define PWRAP_WACS_FSM_REQ 0x02
+#define PWRAP_WACS_FSM_WFDLE 0x04
+#define PWRAP_WACS_FSM_WFVLDCLR 0x06
+#define PWRAP_WACS_INIT_DONE 0x01
+#define PWRAP_WACS_WACS_SYNC_IDLE 0x01
+
+/* macro for device wrapper default value */
+#define PWRAP_DEW_READ_TEST_VAL 0x5aa5
+#define PWRAP_DEW_WRITE_TEST_VAL 0xa55a
+
+/* macro for manual command */
+#define PWRAP_OP_WR 0x1
+#define PWRAP_OP_RD 0x0
+#define PWRAP_OP_CSH 0x0
+#define PWRAP_OP_CSL 0x1
+#define PWRAP_OP_OUTS 0x8
+#define PWRAP_OP_OUTD 0x9
+#define PWRAP_OP_OUTQ 0xA
+
+struct pmic_wrapper {
+ struct platform_device *pdev;
+ void __iomem *pwrap_base;
+ void __iomem *pwrap_bridge_base;
+ struct regmap *regmap;
+};
+
+static bool is_fsm_idle(u32 x)
+{
+ return PWRAP_GET_WACS0_FSM(x) == PWRAP_WACS_FSM_IDLE;
+}
+
+static bool is_fsm_vldclr(u32 x)
+{
+ return PWRAP_GET_WACS0_FSM(x) == PWRAP_WACS_FSM_WFVLDCLR;
+}
+
+static bool is_sync_idle(u32 x)
+{
+ return x & PWRAP_STATE_SYNC_IDLE0;
+}
+
+static bool is_fsm_idle_and_sync_idle(u32 x)
+{
+ return (PWRAP_GET_WACS0_FSM(x) == PWRAP_WACS_FSM_IDLE) &&
+ (x & PWRAP_STATE_SYNC_IDLE0);
+}
+
+static bool is_cipher_ready(u32 x)
+{
+ return x == 1;
+}
+
+static int wait_for_state_ready(
+ struct pmic_wrapper *wrp, bool (*fp)(u32),
+ void *wacs_register, void *wacs_vldclr_register, u32 *read_reg)
+{
+ u32 reg_rdata;
+ unsigned long timeout;
+ int timeout_retry = 0;
+ struct device *dev = &wrp->pdev->dev;
+
+ timeout = jiffies + usecs_to_jiffies(255);
+ do {
+ reg_rdata = readl(wacs_register);
+ if (time_after(jiffies, timeout)) {
+ if (timeout_retry) {
+ dev_err(dev, "timeout when waiting for idle\n");
+ return -ETIMEDOUT;
+ }
+ timeout_retry = 1;
+ }
+ } while (!fp(reg_rdata));
+
+ if (read_reg)
+ *read_reg = reg_rdata;
+
+ return 0;
+}
+
+static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
+{
+ u32 wacs_cmd;
+ int ret;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ ret = wait_for_state_ready(wrp, is_fsm_idle,
+ pwrap_base + PWRAP_WACS2_RDATA,
+ pwrap_base + PWRAP_WACS2_VLDCLR, 0);
+ if (ret) {
+ dev_err(dev, "%s command fail, ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ wacs_cmd = (1 << 31) | ((adr >> 1) << 16) | wdata;
+ writel(wacs_cmd, pwrap_base + PWRAP_WACS2_CMD);
+
+ return 0;
+}
+
+static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
+{
+ u32 reg_rdata;
+ u32 wacs_cmd;
+ int ret;
+ u32 rval;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ if (!rdata)
+ return -EINVAL;
+
+ ret = wait_for_state_ready(wrp, is_fsm_idle,
+ pwrap_base + PWRAP_WACS2_RDATA,
+ pwrap_base + PWRAP_WACS2_VLDCLR, 0);
+ if (ret) {
+ dev_err(dev, "%s command fail, ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ wacs_cmd = (adr >> 1) << 16;
+ writel(wacs_cmd, pwrap_base + PWRAP_WACS2_CMD);
+
+ ret = wait_for_state_ready(wrp, is_fsm_vldclr,
+ pwrap_base + PWRAP_WACS2_RDATA, NULL, ®_rdata);
+ if (ret) {
+ dev_err(dev, "%s read fail, ret=%d\n", __func__, ret);
+ return ret;
+ }
+ rval = PWRAP_GET_WACS0_RDATA(reg_rdata);
+ writel(1, pwrap_base + PWRAP_WACS2_VLDCLR);
+ *rdata = rval;
+
+ return 0;
+}
+
+static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
+{
+ u32 reg_rdata;
+
+ struct pmic_wrapper *wrp = context;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+
+ reg_rdata = readl(pwrap_base + PWRAP_WACS2_RDATA);
+ if (PWRAP_GET_WACS0_FSM(reg_rdata) == PWRAP_WACS_FSM_WFVLDCLR)
+ writel(1, pwrap_base + PWRAP_WACS2_VLDCLR);
+
+ return pwrap_read(wrp, adr, rdata);
+}
+
+static int pwrap_regmap_write(void *context, u32 adr, u32 wdata)
+{
+ u32 reg_rdata;
+
+ struct pmic_wrapper *wrp = context;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+
+ reg_rdata = readl(pwrap_base + PWRAP_WACS2_RDATA);
+ if (PWRAP_GET_WACS0_FSM(reg_rdata) == PWRAP_WACS_FSM_WFVLDCLR)
+ writel(1, pwrap_base + PWRAP_WACS2_VLDCLR);
+
+ return pwrap_write(wrp, adr, wdata);
+}
+
+static int pwrap_reset(struct pmic_wrapper *wrp)
+{
+ int ret;
+ struct reset_control *rstc_infracfg, *rstc_pericfg;
+ struct device *dev = &wrp->pdev->dev;
+
+ rstc_infracfg = devm_reset_control_get(dev, "infra-pwrap-rst");
+ if (IS_ERR(rstc_infracfg)) {
+ ret = PTR_ERR(rstc_infracfg);
+ dev_err(dev, "get pwrap-rst failed=%d\n", ret);
+ return ret;
+ }
+ rstc_pericfg = devm_reset_control_get(dev, "peri-pwrap-bridge-rst");
+ if (IS_ERR(rstc_pericfg)) {
+ ret = PTR_ERR(rstc_pericfg);
+ dev_err(dev, "get peri-pwrap-bridge-rst failed=%d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(rstc_infracfg);
+ reset_control_assert(rstc_pericfg);
+ reset_control_deassert(rstc_infracfg);
+ reset_control_deassert(rstc_pericfg);
+
+ return 0;
+}
+
+static int pwrap_set_clock(struct pmic_wrapper *wrp)
+{
+ int ret;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+ struct clk *pmicspi;
+ struct clk *pmicspi_parent;
+
+ pmicspi = devm_clk_get(dev, "pmicspi-sel");
+ if (IS_ERR(pmicspi)) {
+ ret = PTR_ERR(pmicspi);
+ dev_err(dev, "pmicspi-sel fail ret=%d\n", ret);
+ return ret;
+ }
+ pmicspi_parent = devm_clk_get(dev, "pmicspi-parent");
+ if (IS_ERR(pmicspi_parent)) {
+ ret = PTR_ERR(pmicspi_parent);
+ dev_err(dev, "pmicspi-parent fail ret=%d\n", ret);
+ return ret;
+ }
+
+ /* Note: HW design, enable clock mux and then switch to new source. */
+ ret = clk_set_parent(pmicspi, pmicspi_parent);
+ if (ret) {
+ dev_err(dev, "prepare pmicspi clock fail, ret=%d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(pmicspi);
+ if (ret) {
+ dev_err(dev, "prepare pmicspi clock fail, ret=%d\n", ret);
+ return ret;
+ }
+
+ /* Enable internal dynamic clock */
+ writel(1, pwrap_base + PWRAP_DCM_EN);
+ writel(0, pwrap_base + PWRAP_DCM_DBC_PRD);
+
+ return 0;
+}
+
+static int pwrap_reset_spislv(struct pmic_wrapper *wrp)
+{
+ int ret, i;
+ u32 cmd;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ writel(0, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ writel(0, pwrap_base + PWRAP_WRAP_EN);
+ writel(1, pwrap_base + PWRAP_MUX_SEL);
+ writel(1, pwrap_base + PWRAP_MAN_EN);
+ writel(0, pwrap_base + PWRAP_DIO_EN);
+
+ cmd = (PWRAP_OP_WR << 13) | (PWRAP_OP_CSL << 8);
+ writel(cmd, pwrap_base + PWRAP_MAN_CMD);
+
+ cmd = (PWRAP_OP_WR << 13) | (PWRAP_OP_OUTS << 8);
+ writel(cmd, pwrap_base + PWRAP_MAN_CMD);
+
+ cmd = (PWRAP_OP_WR << 13) | (PWRAP_OP_CSH << 8);
+ writel(cmd, pwrap_base + PWRAP_MAN_CMD);
+
+ for (i = 0; i < 4; i++) {
+ cmd = (PWRAP_OP_WR << 13) | (PWRAP_OP_OUTS << 8);
+ writel(cmd, pwrap_base + PWRAP_MAN_CMD);
+ }
+ ret = wait_for_state_ready(wrp, is_sync_idle,
+ pwrap_base + PWRAP_WACS2_RDATA, NULL, 0);
+ if (ret)
+ dev_err(dev, "%s fail, ret=%d\n", __func__, ret);
+
+ writel(0, pwrap_base + PWRAP_MAN_EN);
+ writel(0, pwrap_base + PWRAP_MUX_SEL);
+
+ return 0;
+}
+
+static int pwrap_init_sidly(struct pmic_wrapper *wrp)
+{
+ u32 arb_en_backup;
+ u32 rdata;
+ u32 ind;
+ u32 result;
+ u32 sidly;
+ bool failed = false;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ /* Enable WACS2 to do read test on bus */
+ writel(1, pwrap_base + PWRAP_WRAP_EN);
+ writel(0x8, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ writel(1, pwrap_base + PWRAP_WACS2_EN);
+ arb_en_backup = readl(pwrap_base + PWRAP_HIPRIO_ARB_EN);
+
+ /* Scan all SIDLY by Read Test */
+ result = 0;
+ for (ind = 0; ind < 4; ind++) {
+ writel(ind, wrp->pwrap_base + PWRAP_SIDLY);
+ pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata);
+ if (rdata == PWRAP_DEW_READ_TEST_VAL) {
+ dev_info(dev, "[Read Test] pass, SIDLY=%x\n", ind);
+ result |= (0x1 << ind);
+ }
+ }
+
+ /* Config SIDLY according to results */
+ switch (result) {
+ /* only 1 pass, choose it */
+ case 0x1:
+ sidly = 0;
+ break;
+ case 0x2:
+ sidly = 1;
+ break;
+ case 0x4:
+ sidly = 2;
+ break;
+ case 0x8:
+ sidly = 3;
+ break;
+ /* two pass, choose the one on SIDLY boundary */
+ case 0x3:
+ sidly = 0;
+ break;
+ case 0x6: /* no boundary, choose smaller one */
+ sidly = 1;
+ break;
+ case 0xc:
+ sidly = 3;
+ break;
+ /* three pass, choose the middle one */
+ case 0x7:
+ sidly = 1;
+ break;
+ case 0xe:
+ sidly = 2;
+ break;
+ /* four pass, choose the smaller middle one */
+ case 0xf:
+ sidly = 1;
+ break;
+ /* pass range not continuous, should not happen */
+ default:
+ sidly = 0;
+ failed = true;
+ break;
+ }
+ writel(sidly, pwrap_base + PWRAP_SIDLY);
+ writel(arb_en_backup, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ if (!failed)
+ return 0;
+
+ dev_err(dev, "%s fail, result=%x\n", __func__, result);
+
+ return -EIO;
+}
+
+static int pwrap_init_reg_clock(struct pmic_wrapper *wrp, u32 regck_sel)
+{
+ u32 wdata;
+ u32 rdata;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ pwrap_read(wrp, MT6397_TOP_CKCON2, &rdata);
+ wdata = rdata & (~(0x3 << 10));
+ if (regck_sel == 1)
+ wdata |= (0x1 << 10);
+
+ if (pwrap_write(wrp, MT6397_TOP_CKCON2, wdata)) {
+ dev_err(dev, "Enable PMIC TOP_CKCON2 fail\n");
+ return -EFAULT;
+ }
+ switch (regck_sel) {
+ case 1:
+ writel(0xc, pwrap_base + PWRAP_CSHEXT);
+ writel(0x4, pwrap_base + PWRAP_CSHEXT_WRITE);
+ writel(0xc, pwrap_base + PWRAP_CSHEXT_READ);
+ writel(0x0, pwrap_base + PWRAP_CSLEXT_START);
+ writel(0x0, pwrap_base + PWRAP_CSLEXT_END);
+ break;
+ case 2:
+ writel(0x4, pwrap_base + PWRAP_CSHEXT);
+ writel(0x0, pwrap_base + PWRAP_CSHEXT_WRITE);
+ writel(0x4, pwrap_base + PWRAP_CSHEXT_READ);
+ writel(0x0, pwrap_base + PWRAP_CSLEXT_START);
+ writel(0x0, pwrap_base + PWRAP_CSLEXT_END);
+ break;
+ default:
+ writel(0xf, pwrap_base + PWRAP_CSHEXT);
+ writel(0xf, pwrap_base + PWRAP_CSHEXT_WRITE);
+ writel(0xf, pwrap_base + PWRAP_CSHEXT_READ);
+ writel(0xf, pwrap_base + PWRAP_CSLEXT_START);
+ writel(0xf, pwrap_base + PWRAP_CSLEXT_END);
+ break;
+ }
+
+ /* Enable PMIC side reg clock */
+ if (pwrap_write(wrp, MT6397_WRP_CKPDN, 0) ||
+ pwrap_write(wrp, MT6397_WRP_RST_CON, 0)) {
+ dev_err(dev, "Enable PMIC fail\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int pwrap_init_dio(struct pmic_wrapper *wrp, u32 dio_en)
+{
+ u32 arb_en_backup;
+ u32 rdata;
+ int ret;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ arb_en_backup = readl(pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ writel(0x8, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ pwrap_write(wrp, PWRAP_DEW_DIO_EN, dio_en);
+
+ /* Check IDLE & INIT_DONE in advance */
+ ret = wait_for_state_ready(wrp, is_fsm_idle_and_sync_idle,
+ pwrap_base + PWRAP_WACS2_RDATA, NULL, 0);
+ if (ret) {
+ dev_err(dev, "%s fail, ret=%d\n", __func__, ret);
+ return ret;
+ }
+ writel(dio_en, pwrap_base + PWRAP_DIO_EN);
+
+ /* Read Test */
+ pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata);
+ if (rdata != PWRAP_DEW_READ_TEST_VAL) {
+ dev_err(dev, "DIO Test Fail en=%x, rdata=%x\n", dio_en, rdata);
+ return -EFAULT;
+ }
+
+ writel(arb_en_backup, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ return 0;
+}
+
+static int pwrap_init_cipher(struct pmic_wrapper *wrp)
+{
+ int ret;
+ u32 arb_en_backup;
+ u32 rdata;
+ unsigned long timeout;
+ int timeout_retry = 0;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ arb_en_backup = readl(pwrap_base + PWRAP_HIPRIO_ARB_EN);
+
+ writel(0x8, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ writel(1, pwrap_base + PWRAP_CIPHER_SWRST);
+ writel(0, pwrap_base + PWRAP_CIPHER_SWRST);
+ writel(1, pwrap_base + PWRAP_CIPHER_KEY_SEL);
+ writel(2, pwrap_base + PWRAP_CIPHER_IV_SEL);
+ writel(1, pwrap_base + PWRAP_CIPHER_LOAD);
+ writel(1, pwrap_base + PWRAP_CIPHER_START);
+
+ /* Config cipher mode @PMIC */
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x1);
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x0);
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_KEY_SEL, 0x1);
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_IV_SEL, 0x2);
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_LOAD, 0x1);
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_START, 0x1);
+
+ /* wait for cipher data ready at AP */
+ ret = wait_for_state_ready(wrp, is_cipher_ready,
+ pwrap_base + PWRAP_CIPHER_RDY, NULL, 0);
+ if (ret) {
+ dev_err(dev, "cipher data ready at AP fail, ret=%d\n", ret);
+ return ret;
+ }
+
+ /* wait for cipher data ready at PMIC */
+ timeout = jiffies + usecs_to_jiffies(255);
+ do {
+ pwrap_read(wrp, PWRAP_DEW_CIPHER_RDY, &rdata);
+ if (time_after(jiffies, timeout)) {
+ if (timeout_retry) {
+ dev_err(dev, "timeout when waiting for idle\n");
+ return -ETIMEDOUT;
+ }
+ timeout_retry = 1;
+ }
+ } while (rdata != 0x1);
+
+ /* wait for cipher mode idle */
+ pwrap_write(wrp, PWRAP_DEW_CIPHER_MODE, 0x1);
+ ret = wait_for_state_ready(wrp, is_fsm_idle_and_sync_idle,
+ pwrap_base + PWRAP_WACS2_RDATA, NULL, 0);
+ if (ret) {
+ dev_err(dev, "cipher mode idle fail, ret=%d\n", ret);
+ return ret;
+ }
+
+ writel(1, pwrap_base + PWRAP_CIPHER_MODE);
+ writel(arb_en_backup, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ /* Write Test */
+ if (pwrap_write(wrp, PWRAP_DEW_WRITE_TEST, PWRAP_DEW_WRITE_TEST_VAL) ||
+ pwrap_read(wrp, PWRAP_DEW_WRITE_TEST, &rdata) ||
+ (rdata != PWRAP_DEW_WRITE_TEST_VAL)) {
+ dev_err(dev, "rdata=0x%04X\n", rdata);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int pwrap_init_crc(struct pmic_wrapper *wrp)
+{
+ void __iomem *pwrap_base = wrp->pwrap_base;
+
+ if (pwrap_write(wrp, PWRAP_DEW_CRC_EN, 0x1))
+ return -EFAULT;
+
+ writel(0x1, pwrap_base + PWRAP_CRC_EN);
+ writel(0x0, pwrap_base + PWRAP_SIG_MODE);
+ writel(PWRAP_DEW_CRC_VAL, pwrap_base + PWRAP_SIG_ADR);
+
+ return 0;
+}
+
+static int pwrap_enable_wacs(struct pmic_wrapper *wrp)
+{
+ void __iomem *pwrap_base = wrp->pwrap_base;
+
+ writel(0x1ff, pwrap_base + PWRAP_HIPRIO_ARB_EN);
+ writel(0x7, pwrap_base + PWRAP_RRARB_EN);
+ writel(0x1, pwrap_base + PWRAP_WACS0_EN);
+ writel(0x1, pwrap_base + PWRAP_WACS1_EN);
+ writel(0x1, pwrap_base + PWRAP_WACS2_EN);
+ writel(0x5, pwrap_base + PWRAP_STAUPD_PRD);
+ writel(0xff, pwrap_base + PWRAP_STAUPD_GRPEN);
+ writel(0xf, pwrap_base + PWRAP_WDT_UNIT);
+ writel(0xffffffff, pwrap_base + PWRAP_WDT_SRC_EN);
+ writel(0x1, pwrap_base + PWRAP_TIMER_EN);
+ writel(~((1 << 31) | (1 << 1)), pwrap_base + PWRAP_INT_EN);
+
+ return 0;
+}
+
+static int pwrap_enable_event_bridge(struct pmic_wrapper *wrp)
+{
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ void __iomem *pwrap_bridge_base = wrp->pwrap_bridge_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ /* enable pwrap events and pwrap bridge in AP side */
+ writel(0x1, pwrap_base + PWRAP_EVENT_IN_EN);
+ writel(0xffff, pwrap_base + PWRAP_EVENT_DST_EN);
+ writel(0x7f, pwrap_bridge_base + PWRAP_BRIDGE_IORD_ARB_EN);
+ writel(0x1, pwrap_bridge_base + PWRAP_BRIDGE_WACS3_EN);
+ writel(0x1, pwrap_bridge_base + PWRAP_BRIDGE_WACS4_EN);
+ writel(0x1, pwrap_bridge_base + PWRAP_BRIDGE_WDT_UNIT);
+ writel(0xffff, pwrap_bridge_base + PWRAP_BRIDGE_WDT_SRC_EN);
+ writel(0x1, pwrap_bridge_base + PWRAP_BRIDGE_TIMER_EN);
+ writel(0x7ff, pwrap_bridge_base + PWRAP_BRIDGE_INT_EN);
+
+ /* enable PMIC event out and sources */
+ if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
+ pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
+ dev_err(dev, "enable dewrap fail\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int pwrap_switch_event_pin(struct pmic_wrapper *wrp)
+{
+ u32 rdata;
+ struct device *dev = &wrp->pdev->dev;
+
+ /* switch event pin from usbdl mode to normal mode @ MT6397 */
+ if (pwrap_read(wrp, MT6397_TOP_CKCON3, &rdata) ||
+ pwrap_write(wrp, MT6397_TOP_CKCON3, (rdata & 0x0007))) {
+ dev_err(dev, "switch event pin fail\n");
+ return -EFAULT;
+ }
+
+ return 0;
+};
+
+static int pwrap_init_done(struct pmic_wrapper *wrp)
+{
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ void __iomem *pwrap_bridge_base = wrp->pwrap_bridge_base;
+
+ writel(1, pwrap_base + PWRAP_INIT_DONE2);
+ writel(1, pwrap_base + PWRAP_INIT_DONE0);
+ writel(1, pwrap_base + PWRAP_INIT_DONE1);
+ writel(1, pwrap_bridge_base + PWRAP_BRIDGE_INIT_DONE3);
+ writel(1, pwrap_bridge_base + PWRAP_BRIDGE_INIT_DONE4);
+
+ return 0;
+}
+
+static int pwrap_init(struct pmic_wrapper *wrp)
+{
+ int ret;
+
+ /* Reset pwrap and pwrap bridge in infracfg and perifcfg. */
+ ret = pwrap_reset(wrp);
+ if (ret)
+ return ret;
+
+ /* Set SPI_CK frequency = 26MHz */
+ ret = pwrap_set_clock(wrp);
+ if (ret)
+ return ret;
+
+ /* Reset SPI slave */
+ ret = pwrap_reset_spislv(wrp);
+ if (ret)
+ return ret;
+
+ /* Setup serial input delay */
+ ret = pwrap_init_sidly(wrp);
+ if (ret)
+ return ret;
+
+ /* SPI Waveform Configuration 0:safe mode, 1:18MHz, 2:26MHz */
+ ret = pwrap_init_reg_clock(wrp, 2);
+ if (ret)
+ return ret;
+
+ /* Enable dual IO mode */
+ ret = pwrap_init_dio(wrp, 1);
+ if (ret)
+ return ret;
+
+ /* Enable encryption */
+ ret = pwrap_init_cipher(wrp);
+ if (ret)
+ return ret;
+
+ /* Signature checking - using CRC */
+ ret = pwrap_init_crc(wrp);
+ if (ret)
+ return ret;
+
+ /* Enable all wrapper access */
+ ret = pwrap_enable_wacs(wrp);
+ if (ret)
+ return ret;
+
+ /* Switch event pin from usbdl mode to normal mode */
+ ret = pwrap_switch_event_pin(wrp);
+ if (ret)
+ return ret;
+
+ /* Enable evnts and pwrap bridge */
+ ret = pwrap_enable_event_bridge(wrp);
+ if (ret)
+ return ret;
+
+ /* Setup the init done registers */
+ ret = pwrap_init_done(wrp);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int pwrap_iomap_init(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct pmic_wrapper *wrp = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwrap-base");
+ if (!res) {
+ dev_err(dev, "could not get pwrap-base resource\n");
+ return -ENODEV;
+ }
+ wrp->pwrap_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!wrp->pwrap_base) {
+ dev_err(dev, "could not get pwrap_base\n");
+ return -ENOMEM;
+ }
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "pwrap-bridge-base");
+ if (!res) {
+ dev_err(dev, "could not get pwrap-bridge-base resource\n");
+ return -ENODEV;
+ }
+ wrp->pwrap_bridge_base = devm_ioremap(dev, res->start,
+ resource_size(res));
+ if (!wrp->pwrap_bridge_base) {
+ dev_err(dev, "could not get pwrap_bridge_base\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int pwrap_check_and_init(struct pmic_wrapper *wrp)
+{
+ int ret;
+ u32 rdata;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ rdata = readl(pwrap_base + PWRAP_INIT_DONE2);
+ if (rdata)
+ goto done;
+
+ ret = pwrap_init(wrp);
+ if (ret) {
+ dev_err(dev, "PMIC wrapper init error, ret=%d\n", ret);
+ return ret;
+ }
+
+done:
+ rdata = readl(pwrap_base + PWRAP_WACS2_RDATA);
+ if (!(rdata & PWRAP_STATE_INIT_DONE0)) {
+ dev_err(dev, "initialization isn't finished\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
+{
+ u32 rdata;
+ struct pmic_wrapper *wrp = dev_id;
+ void __iomem *pwrap_base = wrp->pwrap_base;
+ struct device *dev = &wrp->pdev->dev;
+
+ rdata = readl(pwrap_base + PWRAP_INT_FLG);
+ dev_err(dev, "unexpected interrupt int=0x%x\n", rdata);
+
+ writel(0x8, pwrap_base + PWRAP_HARB_HPRIO);
+ writel(0xffffffff, pwrap_base + PWRAP_INT_CLR);
+
+ return IRQ_HANDLED;
+}
+
+const struct regmap_config pwrap_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .reg_read = pwrap_regmap_read,
+ .reg_write = pwrap_regmap_write,
+};
+
+static struct of_dev_auxdata pwrap_auxdata_lookup[] = {
+ OF_DEV_AUXDATA("mediatek,mt6397", 0, "mt6397", NULL),
+ {},
+};
+
+static int pwrap_probe(struct platform_device *pdev)
+{
+ int ret, irq;
+ struct pmic_wrapper *wrp;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+
+ wrp = devm_kzalloc(dev, sizeof(struct pmic_wrapper), GFP_KERNEL);
+ if (!wrp)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wrp);
+
+ ret = pwrap_iomap_init(pdev);
+ if (ret) {
+ dev_err(dev, "pwrap_iomap_init, ret=%d\n", ret);
+ return ret;
+ }
+
+ wrp->pdev = pdev;
+ ret = pwrap_check_and_init(wrp);
+ if (ret) {
+ dev_err(dev, "PMIC wrapper HW init failed=%d\n", ret);
+ return ret;
+ }
+
+ /* Register pwrap irq to catch interrupt when pwrap behaves abnormal. */
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_threaded_irq(dev, irq,
+ pwrap_interrupt, NULL,
+ IRQF_TRIGGER_HIGH, "mt8135-pwrap", wrp);
+ if (ret) {
+ dev_err(dev, "Register IRQ failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ wrp->regmap = devm_regmap_init(dev, NULL, wrp, &pwrap_regmap_config);
+ if (IS_ERR(wrp->regmap)) {
+ ret = PTR_ERR(wrp->regmap);
+ dev_err(dev, "Failed to allocate register map, ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ pwrap_auxdata_lookup[0].platform_data = wrp->regmap;
+ ret = of_platform_populate(np, NULL, pwrap_auxdata_lookup, dev);
+ if (ret) {
+ dev_err(dev, "%s fail to create devices\n", np->full_name);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct of_device_id of_pwrap_match_tbl[] = {
+ {.compatible = "mediatek,mt8135-pwrap",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
+
+static struct platform_driver pwrap_drv = {
+ .driver = {
+ .name = "mt8135-pwrap",
+ .of_match_table = of_match_ptr(of_pwrap_match_tbl),
+ },
+ .probe = pwrap_probe,
+};
+
+module_platform_driver(pwrap_drv);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek MT8135 PMIC Wrapper Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/mediatek/mt8135-pmic-wrap.h b/drivers/soc/mediatek/mt8135-pmic-wrap.h
new file mode 100644
index 0000000..6e79a0a
--- /dev/null
+++ b/drivers/soc/mediatek/mt8135-pmic-wrap.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PMIC_WRAP_REGS_H__
+#define __PMIC_WRAP_REGS_H__
+
+/* macro for wrapper registers */
+#define PWRAP_MUX_SEL 0x0
+#define PWRAP_WRAP_EN 0x4
+#define PWRAP_DIO_EN 0x8
+#define PWRAP_SIDLY 0xC
+#define PWRAP_CSHEXT 0x10
+#define PWRAP_CSHEXT_WRITE 0x14
+#define PWRAP_CSHEXT_READ 0x18
+#define PWRAP_CSLEXT_START 0x1C
+#define PWRAP_CSLEXT_END 0x20
+#define PWRAP_STAUPD_PRD 0x24
+#define PWRAP_STAUPD_GRPEN 0x28
+#define PWRAP_STAUPD_MAN_TRIG 0x2C
+#define PWRAP_STAUPD_STA 0x30
+#define PWRAP_EVENT_IN_EN 0x34
+#define PWRAP_EVENT_DST_EN 0x38
+#define PWRAP_WRAP_STA 0x3C
+#define PWRAP_RRARB_INIT 0x40
+#define PWRAP_RRARB_EN 0x44
+#define PWRAP_RRARB_STA0 0x48
+#define PWRAP_RRARB_STA1 0x4C
+#define PWRAP_HARB_INIT 0x50
+#define PWRAP_HARB_HPRIO 0x54
+#define PWRAP_HIPRIO_ARB_EN 0x58
+#define PWRAP_HARB_STA0 0x5C
+#define PWRAP_HARB_STA1 0x60
+#define PWRAP_MAN_EN 0x64
+#define PWRAP_MAN_CMD 0x68
+#define PWRAP_MAN_RDATA 0x6C
+#define PWRAP_MAN_VLDCLR 0x70
+#define PWRAP_WACS0_EN 0x74
+#define PWRAP_INIT_DONE0 0x78
+#define PWRAP_WACS0_CMD 0x7C
+#define PWRAP_WACS0_RDATA 0x80
+#define PWRAP_WACS0_VLDCLR 0x84
+#define PWRAP_WACS1_EN 0x88
+#define PWRAP_INIT_DONE1 0x8C
+#define PWRAP_WACS1_CMD 0x90
+#define PWRAP_WACS1_RDATA 0x94
+#define PWRAP_WACS1_VLDCLR 0x98
+#define PWRAP_WACS2_EN 0x9C
+#define PWRAP_INIT_DONE2 0xA0
+#define PWRAP_WACS2_CMD 0xA4
+#define PWRAP_WACS2_RDATA 0xA8
+#define PWRAP_WACS2_VLDCLR 0xAC
+#define PWRAP_INT_EN 0xB0
+#define PWRAP_INT_FLG_RAW 0xB4
+#define PWRAP_INT_FLG 0xB8
+#define PWRAP_INT_CLR 0xBC
+#define PWRAP_SIG_ADR 0xC0
+#define PWRAP_SIG_MODE 0xC4
+#define PWRAP_SIG_VALUE 0xC8
+#define PWRAP_SIG_ERRVAL 0xCC
+#define PWRAP_CRC_EN 0xD0
+#define PWRAP_EVENT_STA 0xD4
+#define PWRAP_EVENT_STACLR 0xD8
+#define PWRAP_TIMER_EN 0xDC
+#define PWRAP_TIMER_STA 0xE0
+#define PWRAP_WDT_UNIT 0xE4
+#define PWRAP_WDT_SRC_EN 0xE8
+#define PWRAP_WDT_FLG 0xEC
+#define PWRAP_DEBUG_INT_SEL 0xF0
+#define PWRAP_CIPHER_KEY_SEL 0x134
+#define PWRAP_CIPHER_IV_SEL 0x138
+#define PWRAP_CIPHER_LOAD 0x13C
+#define PWRAP_CIPHER_START 0x140
+#define PWRAP_CIPHER_RDY 0x144
+#define PWRAP_CIPHER_MODE 0x148
+#define PWRAP_CIPHER_SWRST 0x14C
+#define PWRAP_DCM_EN 0x15C
+#define PWRAP_DCM_DBC_PRD 0x160
+
+/* macro for wrapper bridge registers */
+#define PWRAP_BRIDGE_IARB_INIT 0x0
+#define PWRAP_BRIDGE_IORD_ARB_EN 0x4
+#define PWRAP_BRIDGE_IARB_STA0 0x8
+#define PWRAP_BRIDGE_IARB_STA1 0xC
+#define PWRAP_BRIDGE_WACS3_EN 0x10
+#define PWRAP_BRIDGE_INIT_DONE3 0x14
+#define PWRAP_BRIDGE_WACS3_CMD 0x18
+#define PWRAP_BRIDGE_WACS3_RDATA 0x1C
+#define PWRAP_BRIDGE_WACS3_VLDCLR 0x20
+#define PWRAP_BRIDGE_WACS4_EN 0x24
+#define PWRAP_BRIDGE_INIT_DONE4 0x28
+#define PWRAP_BRIDGE_WACS4_CMD 0x2C
+#define PWRAP_BRIDGE_WACS4_RDATA 0x30
+#define PWRAP_BRIDGE_WACS4_VLDCLR 0x34
+#define PWRAP_BRIDGE_INT_EN 0x38
+#define PWRAP_BRIDGE_INT_FLG_RAW 0x3C
+#define PWRAP_BRIDGE_INT_FLG 0x40
+#define PWRAP_BRIDGE_INT_CLR 0x44
+#define PWRAP_BRIDGE_TIMER_EN 0x48
+#define PWRAP_BRIDGE_TIMER_STA 0x4C
+#define PWRAP_BRIDGE_WDT_UNIT 0x50
+#define PWRAP_BRIDGE_WDT_SRC_EN 0x54
+#define PWRAP_BRIDGE_WDT_FLG 0x58
+#define PWRAP_BRIDGE_DEBUG_INT_SE 0x5C
+
+/* macro for slave device wrapper registers */
+#define PWRAP_DEW_BASE 0xBC00
+#define PWRAP_DEW_EVENT_OUT_EN (PWRAP_DEW_BASE + 0x0)
+#define PWRAP_DEW_DIO_EN (PWRAP_DEW_BASE + 0x2)
+#define PWRAP_DEW_EVENT_SRC_EN (PWRAP_DEW_BASE + 0x4)
+#define PWRAP_DEW_EVENT_SRC (PWRAP_DEW_BASE + 0x6)
+#define PWRAP_DEW_EVENT_FLAG (PWRAP_DEW_BASE + 0x8)
+#define PWRAP_DEW_READ_TEST (PWRAP_DEW_BASE + 0xA)
+#define PWRAP_DEW_WRITE_TEST (PWRAP_DEW_BASE + 0xC)
+#define PWRAP_DEW_CRC_EN (PWRAP_DEW_BASE + 0xE)
+#define PWRAP_DEW_CRC_VAL (PWRAP_DEW_BASE + 0x10)
+#define PWRAP_DEW_MON_GRP_SEL (PWRAP_DEW_BASE + 0x12)
+#define PWRAP_DEW_MON_FLAG_SEL (PWRAP_DEW_BASE + 0x14)
+#define PWRAP_DEW_EVENT_TEST (PWRAP_DEW_BASE + 0x16)
+#define PWRAP_DEW_CIPHER_KEY_SEL (PWRAP_DEW_BASE + 0x18)
+#define PWRAP_DEW_CIPHER_IV_SEL (PWRAP_DEW_BASE + 0x1A)
+#define PWRAP_DEW_CIPHER_LOAD (PWRAP_DEW_BASE + 0x1C)
+#define PWRAP_DEW_CIPHER_START (PWRAP_DEW_BASE + 0x1E)
+#define PWRAP_DEW_CIPHER_RDY (PWRAP_DEW_BASE + 0x20)
+#define PWRAP_DEW_CIPHER_MODE (PWRAP_DEW_BASE + 0x22)
+#define PWRAP_DEW_CIPHER_SWRST (PWRAP_DEW_BASE + 0x24)
+
+#endif /* __PMIC_WRAP_REGS_H__ */
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
2014-12-26 7:09 ` [PATCH v4 1/6] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
2015-01-20 14:43 ` Lee Jones
2014-12-26 7:09 ` [PATCH v4 3/6] dt-bindings:: Add document for MT8135 PMIC Wrapper Flora Fu
` (3 subsequent siblings)
5 siblings, 1 reply; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Add core files for MT6397 MFD driver.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6397-core.c | 94 +++++++++
include/linux/mfd/mt6397/core.h | 23 +++
include/linux/mfd/mt6397/registers.h | 362 +++++++++++++++++++++++++++++++++++
5 files changed, 490 insertions(+)
create mode 100644 drivers/mfd/mt6397-core.c
create mode 100644 include/linux/mfd/mt6397/core.h
create mode 100644 include/linux/mfd/mt6397/registers.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b731..7782e95 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -489,6 +489,16 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MT6397
+ tristate "MediaTek MT6397 PMIC Support"
+ select MFD_CORE
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for MediaTek MT6397 PMIC. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device; additional drivers must be enabled in order
+ to use the functionality of the device.
+
config MFD_MENF21BMC
tristate "MEN 14F021P00 Board Management Controller Support"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..329d4ed 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -179,3 +179,4 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
+obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
new file mode 100644
index 0000000..45ce01a
--- /dev/null
+++ b/drivers/mfd/mt6397-core.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/mt6397/core.h>
+
+static const struct mfd_cell mt6397_devs[] = {
+ {
+ .name = "mt6397-rtc",
+ .of_compatible = "mediatek,mt6397-rtc",
+ },
+ {
+ .name = "mt6397-regulator",
+ .of_compatible = "mediatek,mt6397-regulator",
+ },
+ {
+ .name = "mt6397-codec",
+ .of_compatible = "mediatek,mt6397-codec",
+ },
+ {
+ .name = "mt6397-clk",
+ .of_compatible = "mediatek,mt6397-clk",
+ },
+};
+
+static int mt6397_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct mt6397_chip *mt6397;
+
+ mt6397 = devm_kzalloc(&pdev->dev, sizeof(*mt6397), GFP_KERNEL);
+ if (!mt6397)
+ return -ENOMEM;
+
+ mt6397->dev = &pdev->dev;
+ /*
+ * mt6397 MFD is child device of soc pmic wrapper.
+ * Regmap is set from its parent.
+ */
+ mt6397->regmap = dev_get_platdata(&pdev->dev);
+ if (!mt6397->regmap)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, mt6397);
+
+ ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
+ ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
+ if (ret)
+ dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
+
+ return ret;
+}
+
+static int mt6397_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id mt6397_of_match[] = {
+ { .compatible = "mediatek,mt6397" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mt6397_of_match);
+
+static struct platform_driver mt6397_driver = {
+ .probe = mt6397_probe,
+ .remove = mt6397_remove,
+ .driver = {
+ .name = "mt6397",
+ .of_match_table = of_match_ptr(mt6397_of_match),
+ },
+};
+
+module_platform_driver(mt6397_driver);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("Driver for MediaTek MT6397 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt6397");
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
new file mode 100644
index 0000000..567164e
--- /dev/null
+++ b/include/linux/mfd/mt6397/core.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MFD_MT6397_CORE_H__
+#define __MFD_MT6397_CORE_H__
+
+struct mt6397_chip {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#endif /* __MFD_MT6397_CORE_H__ */
diff --git a/include/linux/mfd/mt6397/registers.h b/include/linux/mfd/mt6397/registers.h
new file mode 100644
index 0000000..b39a5a5
--- /dev/null
+++ b/include/linux/mfd/mt6397/registers.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MFD_MT6397_REGISTERS_H__
+#define __MFD_MT6397_REGISTERS_H__
+
+/* PMIC Registers */
+#define MT6397_CID 0x0100
+#define MT6397_TOP_CKPDN 0x0102
+#define MT6397_TOP_CKPDN_SET 0x0104
+#define MT6397_TOP_CKPDN_CLR 0x0106
+#define MT6397_TOP_CKPDN2 0x0108
+#define MT6397_TOP_CKPDN2_SET 0x010A
+#define MT6397_TOP_CKPDN2_CLR 0x010C
+#define MT6397_TOP_GPIO_CKPDN 0x010E
+#define MT6397_TOP_RST_CON 0x0114
+#define MT6397_WRP_CKPDN 0x011A
+#define MT6397_WRP_RST_CON 0x0120
+#define MT6397_TOP_RST_MISC 0x0126
+#define MT6397_TOP_CKCON1 0x0128
+#define MT6397_TOP_CKCON2 0x012A
+#define MT6397_TOP_CKTST1 0x012C
+#define MT6397_TOP_CKTST2 0x012E
+#define MT6397_OC_DEG_EN 0x0130
+#define MT6397_OC_CTL0 0x0132
+#define MT6397_OC_CTL1 0x0134
+#define MT6397_OC_CTL2 0x0136
+#define MT6397_INT_RSV 0x0138
+#define MT6397_TEST_CON0 0x013A
+#define MT6397_TEST_CON1 0x013C
+#define MT6397_STATUS0 0x013E
+#define MT6397_STATUS1 0x0140
+#define MT6397_PGSTATUS 0x0142
+#define MT6397_CHRSTATUS 0x0144
+#define MT6397_OCSTATUS0 0x0146
+#define MT6397_OCSTATUS1 0x0148
+#define MT6397_OCSTATUS2 0x014A
+#define MT6397_HDMI_PAD_IE 0x014C
+#define MT6397_TEST_OUT_L 0x014E
+#define MT6397_TEST_OUT_H 0x0150
+#define MT6397_TDSEL_CON 0x0152
+#define MT6397_RDSEL_CON 0x0154
+#define MT6397_GPIO_SMT_CON0 0x0156
+#define MT6397_GPIO_SMT_CON1 0x0158
+#define MT6397_GPIO_SMT_CON2 0x015A
+#define MT6397_GPIO_SMT_CON3 0x015C
+#define MT6397_DRV_CON0 0x015E
+#define MT6397_DRV_CON1 0x0160
+#define MT6397_DRV_CON2 0x0162
+#define MT6397_DRV_CON3 0x0164
+#define MT6397_DRV_CON4 0x0166
+#define MT6397_DRV_CON5 0x0168
+#define MT6397_DRV_CON6 0x016A
+#define MT6397_DRV_CON7 0x016C
+#define MT6397_DRV_CON8 0x016E
+#define MT6397_DRV_CON9 0x0170
+#define MT6397_DRV_CON10 0x0172
+#define MT6397_DRV_CON11 0x0174
+#define MT6397_DRV_CON12 0x0176
+#define MT6397_INT_CON0 0x0178
+#define MT6397_INT_CON1 0x017E
+#define MT6397_INT_STATUS0 0x0184
+#define MT6397_INT_STATUS1 0x0186
+#define MT6397_FQMTR_CON0 0x0188
+#define MT6397_FQMTR_CON1 0x018A
+#define MT6397_FQMTR_CON2 0x018C
+#define MT6397_EFUSE_DOUT_0_15 0x01C4
+#define MT6397_EFUSE_DOUT_16_31 0x01C6
+#define MT6397_EFUSE_DOUT_32_47 0x01C8
+#define MT6397_EFUSE_DOUT_48_63 0x01CA
+#define MT6397_SPI_CON 0x01CC
+#define MT6397_TOP_CKPDN3 0x01CE
+#define MT6397_TOP_CKCON3 0x01D4
+#define MT6397_EFUSE_DOUT_64_79 0x01D6
+#define MT6397_EFUSE_DOUT_80_95 0x01D8
+#define MT6397_EFUSE_DOUT_96_111 0x01DA
+#define MT6397_EFUSE_DOUT_112_127 0x01DC
+#define MT6397_EFUSE_DOUT_128_143 0x01DE
+#define MT6397_EFUSE_DOUT_144_159 0x01E0
+#define MT6397_EFUSE_DOUT_160_175 0x01E2
+#define MT6397_EFUSE_DOUT_176_191 0x01E4
+#define MT6397_EFUSE_DOUT_192_207 0x01E6
+#define MT6397_EFUSE_DOUT_208_223 0x01E8
+#define MT6397_EFUSE_DOUT_224_239 0x01EA
+#define MT6397_EFUSE_DOUT_240_255 0x01EC
+#define MT6397_EFUSE_DOUT_256_271 0x01EE
+#define MT6397_EFUSE_DOUT_272_287 0x01F0
+#define MT6397_EFUSE_DOUT_288_300 0x01F2
+#define MT6397_EFUSE_DOUT_304_319 0x01F4
+#define MT6397_BUCK_CON0 0x0200
+#define MT6397_BUCK_CON1 0x0202
+#define MT6397_BUCK_CON2 0x0204
+#define MT6397_BUCK_CON3 0x0206
+#define MT6397_BUCK_CON4 0x0208
+#define MT6397_BUCK_CON5 0x020A
+#define MT6397_BUCK_CON6 0x020C
+#define MT6397_BUCK_CON7 0x020E
+#define MT6397_BUCK_CON8 0x0210
+#define MT6397_BUCK_CON9 0x0212
+#define MT6397_VCA15_CON0 0x0214
+#define MT6397_VCA15_CON1 0x0216
+#define MT6397_VCA15_CON2 0x0218
+#define MT6397_VCA15_CON3 0x021A
+#define MT6397_VCA15_CON4 0x021C
+#define MT6397_VCA15_CON5 0x021E
+#define MT6397_VCA15_CON6 0x0220
+#define MT6397_VCA15_CON7 0x0222
+#define MT6397_VCA15_CON8 0x0224
+#define MT6397_VCA15_CON9 0x0226
+#define MT6397_VCA15_CON10 0x0228
+#define MT6397_VCA15_CON11 0x022A
+#define MT6397_VCA15_CON12 0x022C
+#define MT6397_VCA15_CON13 0x022E
+#define MT6397_VCA15_CON14 0x0230
+#define MT6397_VCA15_CON15 0x0232
+#define MT6397_VCA15_CON16 0x0234
+#define MT6397_VCA15_CON17 0x0236
+#define MT6397_VCA15_CON18 0x0238
+#define MT6397_VSRMCA15_CON0 0x023A
+#define MT6397_VSRMCA15_CON1 0x023C
+#define MT6397_VSRMCA15_CON2 0x023E
+#define MT6397_VSRMCA15_CON3 0x0240
+#define MT6397_VSRMCA15_CON4 0x0242
+#define MT6397_VSRMCA15_CON5 0x0244
+#define MT6397_VSRMCA15_CON6 0x0246
+#define MT6397_VSRMCA15_CON7 0x0248
+#define MT6397_VSRMCA15_CON8 0x024A
+#define MT6397_VSRMCA15_CON9 0x024C
+#define MT6397_VSRMCA15_CON10 0x024E
+#define MT6397_VSRMCA15_CON11 0x0250
+#define MT6397_VSRMCA15_CON12 0x0252
+#define MT6397_VSRMCA15_CON13 0x0254
+#define MT6397_VSRMCA15_CON14 0x0256
+#define MT6397_VSRMCA15_CON15 0x0258
+#define MT6397_VSRMCA15_CON16 0x025A
+#define MT6397_VSRMCA15_CON17 0x025C
+#define MT6397_VSRMCA15_CON18 0x025E
+#define MT6397_VSRMCA15_CON19 0x0260
+#define MT6397_VSRMCA15_CON20 0x0262
+#define MT6397_VSRMCA15_CON21 0x0264
+#define MT6397_VCORE_CON0 0x0266
+#define MT6397_VCORE_CON1 0x0268
+#define MT6397_VCORE_CON2 0x026A
+#define MT6397_VCORE_CON3 0x026C
+#define MT6397_VCORE_CON4 0x026E
+#define MT6397_VCORE_CON5 0x0270
+#define MT6397_VCORE_CON6 0x0272
+#define MT6397_VCORE_CON7 0x0274
+#define MT6397_VCORE_CON8 0x0276
+#define MT6397_VCORE_CON9 0x0278
+#define MT6397_VCORE_CON10 0x027A
+#define MT6397_VCORE_CON11 0x027C
+#define MT6397_VCORE_CON12 0x027E
+#define MT6397_VCORE_CON13 0x0280
+#define MT6397_VCORE_CON14 0x0282
+#define MT6397_VCORE_CON15 0x0284
+#define MT6397_VCORE_CON16 0x0286
+#define MT6397_VCORE_CON17 0x0288
+#define MT6397_VCORE_CON18 0x028A
+#define MT6397_VGPU_CON0 0x028C
+#define MT6397_VGPU_CON1 0x028E
+#define MT6397_VGPU_CON2 0x0290
+#define MT6397_VGPU_CON3 0x0292
+#define MT6397_VGPU_CON4 0x0294
+#define MT6397_VGPU_CON5 0x0296
+#define MT6397_VGPU_CON6 0x0298
+#define MT6397_VGPU_CON7 0x029A
+#define MT6397_VGPU_CON8 0x029C
+#define MT6397_VGPU_CON9 0x029E
+#define MT6397_VGPU_CON10 0x02A0
+#define MT6397_VGPU_CON11 0x02A2
+#define MT6397_VGPU_CON12 0x02A4
+#define MT6397_VGPU_CON13 0x02A6
+#define MT6397_VGPU_CON14 0x02A8
+#define MT6397_VGPU_CON15 0x02AA
+#define MT6397_VGPU_CON16 0x02AC
+#define MT6397_VGPU_CON17 0x02AE
+#define MT6397_VGPU_CON18 0x02B0
+#define MT6397_VIO18_CON0 0x0300
+#define MT6397_VIO18_CON1 0x0302
+#define MT6397_VIO18_CON2 0x0304
+#define MT6397_VIO18_CON3 0x0306
+#define MT6397_VIO18_CON4 0x0308
+#define MT6397_VIO18_CON5 0x030A
+#define MT6397_VIO18_CON6 0x030C
+#define MT6397_VIO18_CON7 0x030E
+#define MT6397_VIO18_CON8 0x0310
+#define MT6397_VIO18_CON9 0x0312
+#define MT6397_VIO18_CON10 0x0314
+#define MT6397_VIO18_CON11 0x0316
+#define MT6397_VIO18_CON12 0x0318
+#define MT6397_VIO18_CON13 0x031A
+#define MT6397_VIO18_CON14 0x031C
+#define MT6397_VIO18_CON15 0x031E
+#define MT6397_VIO18_CON16 0x0320
+#define MT6397_VIO18_CON17 0x0322
+#define MT6397_VIO18_CON18 0x0324
+#define MT6397_VPCA7_CON0 0x0326
+#define MT6397_VPCA7_CON1 0x0328
+#define MT6397_VPCA7_CON2 0x032A
+#define MT6397_VPCA7_CON3 0x032C
+#define MT6397_VPCA7_CON4 0x032E
+#define MT6397_VPCA7_CON5 0x0330
+#define MT6397_VPCA7_CON6 0x0332
+#define MT6397_VPCA7_CON7 0x0334
+#define MT6397_VPCA7_CON8 0x0336
+#define MT6397_VPCA7_CON9 0x0338
+#define MT6397_VPCA7_CON10 0x033A
+#define MT6397_VPCA7_CON11 0x033C
+#define MT6397_VPCA7_CON12 0x033E
+#define MT6397_VPCA7_CON13 0x0340
+#define MT6397_VPCA7_CON14 0x0342
+#define MT6397_VPCA7_CON15 0x0344
+#define MT6397_VPCA7_CON16 0x0346
+#define MT6397_VPCA7_CON17 0x0348
+#define MT6397_VPCA7_CON18 0x034A
+#define MT6397_VSRMCA7_CON0 0x034C
+#define MT6397_VSRMCA7_CON1 0x034E
+#define MT6397_VSRMCA7_CON2 0x0350
+#define MT6397_VSRMCA7_CON3 0x0352
+#define MT6397_VSRMCA7_CON4 0x0354
+#define MT6397_VSRMCA7_CON5 0x0356
+#define MT6397_VSRMCA7_CON6 0x0358
+#define MT6397_VSRMCA7_CON7 0x035A
+#define MT6397_VSRMCA7_CON8 0x035C
+#define MT6397_VSRMCA7_CON9 0x035E
+#define MT6397_VSRMCA7_CON10 0x0360
+#define MT6397_VSRMCA7_CON11 0x0362
+#define MT6397_VSRMCA7_CON12 0x0364
+#define MT6397_VSRMCA7_CON13 0x0366
+#define MT6397_VSRMCA7_CON14 0x0368
+#define MT6397_VSRMCA7_CON15 0x036A
+#define MT6397_VSRMCA7_CON16 0x036C
+#define MT6397_VSRMCA7_CON17 0x036E
+#define MT6397_VSRMCA7_CON18 0x0370
+#define MT6397_VSRMCA7_CON19 0x0372
+#define MT6397_VSRMCA7_CON20 0x0374
+#define MT6397_VSRMCA7_CON21 0x0376
+#define MT6397_VDRM_CON0 0x0378
+#define MT6397_VDRM_CON1 0x037A
+#define MT6397_VDRM_CON2 0x037C
+#define MT6397_VDRM_CON3 0x037E
+#define MT6397_VDRM_CON4 0x0380
+#define MT6397_VDRM_CON5 0x0382
+#define MT6397_VDRM_CON6 0x0384
+#define MT6397_VDRM_CON7 0x0386
+#define MT6397_VDRM_CON8 0x0388
+#define MT6397_VDRM_CON9 0x038A
+#define MT6397_VDRM_CON10 0x038C
+#define MT6397_VDRM_CON11 0x038E
+#define MT6397_VDRM_CON12 0x0390
+#define MT6397_VDRM_CON13 0x0392
+#define MT6397_VDRM_CON14 0x0394
+#define MT6397_VDRM_CON15 0x0396
+#define MT6397_VDRM_CON16 0x0398
+#define MT6397_VDRM_CON17 0x039A
+#define MT6397_VDRM_CON18 0x039C
+#define MT6397_BUCK_K_CON0 0x039E
+#define MT6397_BUCK_K_CON1 0x03A0
+#define MT6397_ANALDO_CON0 0x0400
+#define MT6397_ANALDO_CON1 0x0402
+#define MT6397_ANALDO_CON2 0x0404
+#define MT6397_ANALDO_CON3 0x0406
+#define MT6397_ANALDO_CON4 0x0408
+#define MT6397_ANALDO_CON5 0x040A
+#define MT6397_ANALDO_CON6 0x040C
+#define MT6397_ANALDO_CON7 0x040E
+#define MT6397_DIGLDO_CON0 0x0410
+#define MT6397_DIGLDO_CON1 0x0412
+#define MT6397_DIGLDO_CON2 0x0414
+#define MT6397_DIGLDO_CON3 0x0416
+#define MT6397_DIGLDO_CON4 0x0418
+#define MT6397_DIGLDO_CON5 0x041A
+#define MT6397_DIGLDO_CON6 0x041C
+#define MT6397_DIGLDO_CON7 0x041E
+#define MT6397_DIGLDO_CON8 0x0420
+#define MT6397_DIGLDO_CON9 0x0422
+#define MT6397_DIGLDO_CON10 0x0424
+#define MT6397_DIGLDO_CON11 0x0426
+#define MT6397_DIGLDO_CON12 0x0428
+#define MT6397_DIGLDO_CON13 0x042A
+#define MT6397_DIGLDO_CON14 0x042C
+#define MT6397_DIGLDO_CON15 0x042E
+#define MT6397_DIGLDO_CON16 0x0430
+#define MT6397_DIGLDO_CON17 0x0432
+#define MT6397_DIGLDO_CON18 0x0434
+#define MT6397_DIGLDO_CON19 0x0436
+#define MT6397_DIGLDO_CON20 0x0438
+#define MT6397_DIGLDO_CON21 0x043A
+#define MT6397_DIGLDO_CON22 0x043C
+#define MT6397_DIGLDO_CON23 0x043E
+#define MT6397_DIGLDO_CON24 0x0440
+#define MT6397_DIGLDO_CON25 0x0442
+#define MT6397_DIGLDO_CON26 0x0444
+#define MT6397_DIGLDO_CON27 0x0446
+#define MT6397_DIGLDO_CON28 0x0448
+#define MT6397_DIGLDO_CON29 0x044A
+#define MT6397_DIGLDO_CON30 0x044C
+#define MT6397_DIGLDO_CON31 0x044E
+#define MT6397_DIGLDO_CON32 0x0450
+#define MT6397_DIGLDO_CON33 0x045A
+#define MT6397_SPK_CON0 0x0600
+#define MT6397_SPK_CON1 0x0602
+#define MT6397_SPK_CON2 0x0604
+#define MT6397_SPK_CON3 0x0606
+#define MT6397_SPK_CON4 0x0608
+#define MT6397_SPK_CON5 0x060A
+#define MT6397_SPK_CON6 0x060C
+#define MT6397_SPK_CON7 0x060E
+#define MT6397_SPK_CON8 0x0610
+#define MT6397_SPK_CON9 0x0612
+#define MT6397_SPK_CON10 0x0614
+#define MT6397_SPK_CON11 0x0616
+#define MT6397_AUDDAC_CON0 0x0700
+#define MT6397_AUDBUF_CFG0 0x0702
+#define MT6397_AUDBUF_CFG1 0x0704
+#define MT6397_AUDBUF_CFG2 0x0706
+#define MT6397_AUDBUF_CFG3 0x0708
+#define MT6397_AUDBUF_CFG4 0x070A
+#define MT6397_IBIASDIST_CFG0 0x070C
+#define MT6397_AUDACCDEPOP_CFG0 0x070E
+#define MT6397_AUD_IV_CFG0 0x0710
+#define MT6397_AUDCLKGEN_CFG0 0x0712
+#define MT6397_AUDLDO_CFG0 0x0714
+#define MT6397_AUDLDO_CFG1 0x0716
+#define MT6397_AUDNVREGGLB_CFG0 0x0718
+#define MT6397_AUD_NCP0 0x071A
+#define MT6397_AUDPREAMP_CON0 0x071C
+#define MT6397_AUDADC_CON0 0x071E
+#define MT6397_AUDADC_CON1 0x0720
+#define MT6397_AUDADC_CON2 0x0722
+#define MT6397_AUDADC_CON3 0x0724
+#define MT6397_AUDADC_CON4 0x0726
+#define MT6397_AUDADC_CON5 0x0728
+#define MT6397_AUDADC_CON6 0x072A
+#define MT6397_AUDDIGMI_CON0 0x072C
+#define MT6397_AUDLSBUF_CON0 0x072E
+#define MT6397_AUDLSBUF_CON1 0x0730
+#define MT6397_AUDENCSPARE_CON0 0x0732
+#define MT6397_AUDENCCLKSQ_CON0 0x0734
+#define MT6397_AUDPREAMPGAIN_CON0 0x0736
+#define MT6397_ZCD_CON0 0x0738
+#define MT6397_ZCD_CON1 0x073A
+#define MT6397_ZCD_CON2 0x073C
+#define MT6397_ZCD_CON3 0x073E
+#define MT6397_ZCD_CON4 0x0740
+#define MT6397_ZCD_CON5 0x0742
+#define MT6397_NCP_CLKDIV_CON0 0x0744
+#define MT6397_NCP_CLKDIV_CON1 0x0746
+
+#endif /* __MFD_MT6397_REGISTERS_H__ */
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/6] dt-bindings:: Add document for MT8135 PMIC Wrapper
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
2014-12-26 7:09 ` [PATCH v4 1/6] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Flora Fu
2014-12-26 7:09 ` [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
2014-12-26 7:09 ` [PATCH v4 4/6] dt-bindings: Add document for MT6397 MFD Flora Fu
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
.../soc/mediatek/mediatek,mt8135-pwrap.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8135-pwrap.txt
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8135-pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8135-pwrap.txt
new file mode 100644
index 0000000..d630fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8135-pwrap.txt
@@ -0,0 +1,51 @@
+MediaTek MT8135 PMIC Wrapper Driver
+
+MediaTek PMIC MFD is interfaced to host controller using SPI interface
+by a proprietary hardware called PMIC wrapper or pwrap.
+
++-----------------+ +---------------+
+| | | |
+| Mediatek AP SoC | | |
+| (ex. MT8135) | | MT6397 |
+| | | |
+| +--------+ | (SPI bus) | +--------+ |
+| | | |-----------| | | |
+| | PMIC | |-----------| | PMIC | |
+| | Wrapper| |-----------| | Wrapper| |
+| | | |-----------| | | |
+| +--------+ | | +--------+ |
+| | | |
++-----------------+ +---------------+
+
+This document describes the binding for MT8135 PMIC wrapper.
+
+Required properties in pwrap device node.
+- compatible:"mediatek,mt8135-pwrap"
+- interrupts: IRQ for pwrap in SOC
+- reg: address range for pwrap registers
+- resets: reset bit for pwrap
+- clock: clock frequency selection in SPI bus
+
+Optional properities:
+- pmic: Mediatek PMIC MFD is the child device of pwrap
+ See the following for child node definitions:
+ Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Example:
+ pwrap: pwrap at 1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base", "pwrap-bridge-base";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infrarst MT8135_INFRA_PMIC_WRAP_RST>,
+ <&perirst MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "infra-pwrap-rst",
+ "peri-pwrap-bridge-rst";
+ clocks = <&pmicspi_sel>, <&clk26m>;
+ clock-names = "pmicspi-sel", "pmicspi-parent";
+
+ pmic {
+ compatible = "mediatek,mt6397";
+ };
+ };
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 4/6] dt-bindings: Add document for MT6397 MFD
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
` (2 preceding siblings ...)
2014-12-26 7:09 ` [PATCH v4 3/6] dt-bindings:: Add document for MT8135 PMIC Wrapper Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
2014-12-26 7:09 ` [PATCH v4 5/6] arm: dts: mt8135: Add support for MT8135 PMIC wrapper Flora Fu
2014-12-26 7:09 ` [PATCH v4 6/6] arm: dts: mt8135: Add support for MT6397 MFD and regulator Flora Fu
5 siblings, 0 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
Documentation/devicetree/bindings/mfd/mt6397.txt | 75 ++++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6397.txt
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
new file mode 100644
index 0000000..64ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -0,0 +1,75 @@
+MediaTek MT6397 Multifunction Device Driver
+
+MT6397 is a multifunction device with the following sub modules:
+- Regulator
+- RTC
+- Audio codec
+- GPIO
+- Clock
+
+It is interfaced to host controller using SPI interface by a proprietary hardware
+called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap.
+See the following for pwarp node definitions:
+Documentation/devicetree/bindings/soc/mediatek,mt8135-pwrap.txt
+
+This document describes the binding for mfd device and its sub module.
+
+Required properties:
+compatible: "mediatek,mt6397"
+
+Optional properties:
+- codec: Audio codec
+- pinctrl: GPIO in mt6397
+- rtc: RTC
+- clock: clocks in mt6397
+- regulators: regulators in mt6397
+
+Example:
+ pwrap: pwrap at 1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base", "pwrap-bridge-base";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infrarst MT8135_INFRA_PMIC_WRAP_RST>,
+ <&perirst MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "infra-pwrap-rst",
+ "peri-pwrap-bridge-rst";
+ clocks = <&pmicspi_sel>, <&clk26m>;
+ clock-names = "pmicspi-sel", "pmicspi-parent";
+
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ codec: mt6397codec {
+ compatible = "mediatek,mt6397-codec";
+ };
+
+ pinctrl at 0x0000C000 {
+ compatible = "mediatek,mt6397-pinctrl";
+ reg = <0 0x0000C000 0 0x0108>;
+ gpio-controller;
+ };
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+ };
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 5/6] arm: dts: mt8135: Add support for MT8135 PMIC wrapper
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
` (3 preceding siblings ...)
2014-12-26 7:09 ` [PATCH v4 4/6] dt-bindings: Add document for MT6397 MFD Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
2014-12-26 7:09 ` [PATCH v4 6/6] arm: dts: mt8135: Add support for MT6397 MFD and regulator Flora Fu
5 siblings, 0 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Add device tree for MT8135 PMIC wrapper in mt8135.dtsi.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
arch/arm/boot/dts/mt8135.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index ec83e69..ab08063 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -117,6 +117,20 @@
reg = <0 0x10200030 0 0x1c>;
};
+ pwrap: pwrap at 1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base", "pwrap-bridge-base";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infrarst MT8135_INFRA_PMIC_WRAP_RST>,
+ <&perirst MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "infra-pwrap-rst",
+ "peri-pwrap-bridge-rst";
+ clocks = <&topckgen TOP_PMICSPI_SEL>, <&clk26m> ;
+ clock-names = "pmicspi-sel", "pmicspi-parent";
+ };
+
gic: interrupt-controller at 10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 6/6] arm: dts: mt8135: Add support for MT6397 MFD and regulator
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
` (4 preceding siblings ...)
2014-12-26 7:09 ` [PATCH v4 5/6] arm: dts: mt8135: Add support for MT8135 PMIC wrapper Flora Fu
@ 2014-12-26 7:09 ` Flora Fu
5 siblings, 0 replies; 10+ messages in thread
From: Flora Fu @ 2014-12-26 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Add device tree for MT6397 MFD and regulator in mt8135 evb board file.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++++++++++++++++++++++++++++++++++
1 file changed, 193 insertions(+)
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index a5adf97..3be2c8b 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -23,3 +23,196 @@
reg = <0 0x80000000 0 0x40000000>;
};
};
+
+&pwrap {
+ pmic: mt6397 {
+ compatible = "mediatek,mt6397";
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-always-on;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ regulator-always-on;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ regulator-always-on;
+ };
+
+ mt6397_vusb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ regulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+};
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD
2014-12-26 7:09 ` [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD Flora Fu
@ 2015-01-20 14:43 ` Lee Jones
2015-01-20 15:05 ` Sascha Hauer
0 siblings, 1 reply; 10+ messages in thread
From: Lee Jones @ 2015-01-20 14:43 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 26 Dec 2014, Flora Fu wrote:
> Add core files for MT6397 MFD driver.
>
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> ---
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/mt6397-core.c | 94 +++++++++
> include/linux/mfd/mt6397/core.h | 23 +++
> include/linux/mfd/mt6397/registers.h | 362 +++++++++++++++++++++++++++++++++++
> 5 files changed, 490 insertions(+)
> create mode 100644 drivers/mfd/mt6397-core.c
> create mode 100644 include/linux/mfd/mt6397/core.h
> create mode 100644 include/linux/mfd/mt6397/registers.h
Looks okay.
I assume there are dependancies on this patch. What are they?
How would you like this set to be handled?
For my own reference:
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2e6b731..7782e95 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -489,6 +489,16 @@ config MFD_MAX8998
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MT6397
> + tristate "MediaTek MT6397 PMIC Support"
> + select MFD_CORE
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for MediaTek MT6397 PMIC. This is
> + a Power Management IC. This driver provides common support for
> + accessing the device; additional drivers must be enabled in order
> + to use the functionality of the device.
> +
> config MFD_MENF21BMC
> tristate "MEN 14F021P00 Board Management Controller Support"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 53467e2..329d4ed 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -179,3 +179,4 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
>
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> +obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> new file mode 100644
> index 0000000..45ce01a
> --- /dev/null
> +++ b/drivers/mfd/mt6397-core.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Flora Fu <flora.fu@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/mt6397/core.h>
> +
> +static const struct mfd_cell mt6397_devs[] = {
> + {
> + .name = "mt6397-rtc",
> + .of_compatible = "mediatek,mt6397-rtc",
> + },
> + {
> + .name = "mt6397-regulator",
> + .of_compatible = "mediatek,mt6397-regulator",
> + },
> + {
> + .name = "mt6397-codec",
> + .of_compatible = "mediatek,mt6397-codec",
> + },
> + {
> + .name = "mt6397-clk",
> + .of_compatible = "mediatek,mt6397-clk",
> + },
> +};
> +
> +static int mt6397_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct mt6397_chip *mt6397;
> +
> + mt6397 = devm_kzalloc(&pdev->dev, sizeof(*mt6397), GFP_KERNEL);
> + if (!mt6397)
> + return -ENOMEM;
> +
> + mt6397->dev = &pdev->dev;
> + /*
> + * mt6397 MFD is child device of soc pmic wrapper.
> + * Regmap is set from its parent.
> + */
> + mt6397->regmap = dev_get_platdata(&pdev->dev);
> + if (!mt6397->regmap)
> + return -ENODEV;
> +
> + platform_set_drvdata(pdev, mt6397);
> +
> + ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
> + ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
> + if (ret)
> + dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int mt6397_remove(struct platform_device *pdev)
> +{
> + mfd_remove_devices(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mt6397_of_match[] = {
> + { .compatible = "mediatek,mt6397" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, mt6397_of_match);
> +
> +static struct platform_driver mt6397_driver = {
> + .probe = mt6397_probe,
> + .remove = mt6397_remove,
> + .driver = {
> + .name = "mt6397",
> + .of_match_table = of_match_ptr(mt6397_of_match),
> + },
> +};
> +
> +module_platform_driver(mt6397_driver);
> +
> +MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
> +MODULE_DESCRIPTION("Driver for MediaTek MT6397 PMIC");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:mt6397");
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
> new file mode 100644
> index 0000000..567164e
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Flora Fu <flora.fu@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MFD_MT6397_CORE_H__
> +#define __MFD_MT6397_CORE_H__
> +
> +struct mt6397_chip {
> + struct device *dev;
> + struct regmap *regmap;
> +};
> +
> +#endif /* __MFD_MT6397_CORE_H__ */
> diff --git a/include/linux/mfd/mt6397/registers.h b/include/linux/mfd/mt6397/registers.h
> new file mode 100644
> index 0000000..b39a5a5
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/registers.h
> @@ -0,0 +1,362 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Flora Fu <flora.fu@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MFD_MT6397_REGISTERS_H__
> +#define __MFD_MT6397_REGISTERS_H__
> +
> +/* PMIC Registers */
> +#define MT6397_CID 0x0100
> +#define MT6397_TOP_CKPDN 0x0102
> +#define MT6397_TOP_CKPDN_SET 0x0104
> +#define MT6397_TOP_CKPDN_CLR 0x0106
> +#define MT6397_TOP_CKPDN2 0x0108
> +#define MT6397_TOP_CKPDN2_SET 0x010A
> +#define MT6397_TOP_CKPDN2_CLR 0x010C
> +#define MT6397_TOP_GPIO_CKPDN 0x010E
> +#define MT6397_TOP_RST_CON 0x0114
> +#define MT6397_WRP_CKPDN 0x011A
> +#define MT6397_WRP_RST_CON 0x0120
> +#define MT6397_TOP_RST_MISC 0x0126
> +#define MT6397_TOP_CKCON1 0x0128
> +#define MT6397_TOP_CKCON2 0x012A
> +#define MT6397_TOP_CKTST1 0x012C
> +#define MT6397_TOP_CKTST2 0x012E
> +#define MT6397_OC_DEG_EN 0x0130
> +#define MT6397_OC_CTL0 0x0132
> +#define MT6397_OC_CTL1 0x0134
> +#define MT6397_OC_CTL2 0x0136
> +#define MT6397_INT_RSV 0x0138
> +#define MT6397_TEST_CON0 0x013A
> +#define MT6397_TEST_CON1 0x013C
> +#define MT6397_STATUS0 0x013E
> +#define MT6397_STATUS1 0x0140
> +#define MT6397_PGSTATUS 0x0142
> +#define MT6397_CHRSTATUS 0x0144
> +#define MT6397_OCSTATUS0 0x0146
> +#define MT6397_OCSTATUS1 0x0148
> +#define MT6397_OCSTATUS2 0x014A
> +#define MT6397_HDMI_PAD_IE 0x014C
> +#define MT6397_TEST_OUT_L 0x014E
> +#define MT6397_TEST_OUT_H 0x0150
> +#define MT6397_TDSEL_CON 0x0152
> +#define MT6397_RDSEL_CON 0x0154
> +#define MT6397_GPIO_SMT_CON0 0x0156
> +#define MT6397_GPIO_SMT_CON1 0x0158
> +#define MT6397_GPIO_SMT_CON2 0x015A
> +#define MT6397_GPIO_SMT_CON3 0x015C
> +#define MT6397_DRV_CON0 0x015E
> +#define MT6397_DRV_CON1 0x0160
> +#define MT6397_DRV_CON2 0x0162
> +#define MT6397_DRV_CON3 0x0164
> +#define MT6397_DRV_CON4 0x0166
> +#define MT6397_DRV_CON5 0x0168
> +#define MT6397_DRV_CON6 0x016A
> +#define MT6397_DRV_CON7 0x016C
> +#define MT6397_DRV_CON8 0x016E
> +#define MT6397_DRV_CON9 0x0170
> +#define MT6397_DRV_CON10 0x0172
> +#define MT6397_DRV_CON11 0x0174
> +#define MT6397_DRV_CON12 0x0176
> +#define MT6397_INT_CON0 0x0178
> +#define MT6397_INT_CON1 0x017E
> +#define MT6397_INT_STATUS0 0x0184
> +#define MT6397_INT_STATUS1 0x0186
> +#define MT6397_FQMTR_CON0 0x0188
> +#define MT6397_FQMTR_CON1 0x018A
> +#define MT6397_FQMTR_CON2 0x018C
> +#define MT6397_EFUSE_DOUT_0_15 0x01C4
> +#define MT6397_EFUSE_DOUT_16_31 0x01C6
> +#define MT6397_EFUSE_DOUT_32_47 0x01C8
> +#define MT6397_EFUSE_DOUT_48_63 0x01CA
> +#define MT6397_SPI_CON 0x01CC
> +#define MT6397_TOP_CKPDN3 0x01CE
> +#define MT6397_TOP_CKCON3 0x01D4
> +#define MT6397_EFUSE_DOUT_64_79 0x01D6
> +#define MT6397_EFUSE_DOUT_80_95 0x01D8
> +#define MT6397_EFUSE_DOUT_96_111 0x01DA
> +#define MT6397_EFUSE_DOUT_112_127 0x01DC
> +#define MT6397_EFUSE_DOUT_128_143 0x01DE
> +#define MT6397_EFUSE_DOUT_144_159 0x01E0
> +#define MT6397_EFUSE_DOUT_160_175 0x01E2
> +#define MT6397_EFUSE_DOUT_176_191 0x01E4
> +#define MT6397_EFUSE_DOUT_192_207 0x01E6
> +#define MT6397_EFUSE_DOUT_208_223 0x01E8
> +#define MT6397_EFUSE_DOUT_224_239 0x01EA
> +#define MT6397_EFUSE_DOUT_240_255 0x01EC
> +#define MT6397_EFUSE_DOUT_256_271 0x01EE
> +#define MT6397_EFUSE_DOUT_272_287 0x01F0
> +#define MT6397_EFUSE_DOUT_288_300 0x01F2
> +#define MT6397_EFUSE_DOUT_304_319 0x01F4
> +#define MT6397_BUCK_CON0 0x0200
> +#define MT6397_BUCK_CON1 0x0202
> +#define MT6397_BUCK_CON2 0x0204
> +#define MT6397_BUCK_CON3 0x0206
> +#define MT6397_BUCK_CON4 0x0208
> +#define MT6397_BUCK_CON5 0x020A
> +#define MT6397_BUCK_CON6 0x020C
> +#define MT6397_BUCK_CON7 0x020E
> +#define MT6397_BUCK_CON8 0x0210
> +#define MT6397_BUCK_CON9 0x0212
> +#define MT6397_VCA15_CON0 0x0214
> +#define MT6397_VCA15_CON1 0x0216
> +#define MT6397_VCA15_CON2 0x0218
> +#define MT6397_VCA15_CON3 0x021A
> +#define MT6397_VCA15_CON4 0x021C
> +#define MT6397_VCA15_CON5 0x021E
> +#define MT6397_VCA15_CON6 0x0220
> +#define MT6397_VCA15_CON7 0x0222
> +#define MT6397_VCA15_CON8 0x0224
> +#define MT6397_VCA15_CON9 0x0226
> +#define MT6397_VCA15_CON10 0x0228
> +#define MT6397_VCA15_CON11 0x022A
> +#define MT6397_VCA15_CON12 0x022C
> +#define MT6397_VCA15_CON13 0x022E
> +#define MT6397_VCA15_CON14 0x0230
> +#define MT6397_VCA15_CON15 0x0232
> +#define MT6397_VCA15_CON16 0x0234
> +#define MT6397_VCA15_CON17 0x0236
> +#define MT6397_VCA15_CON18 0x0238
> +#define MT6397_VSRMCA15_CON0 0x023A
> +#define MT6397_VSRMCA15_CON1 0x023C
> +#define MT6397_VSRMCA15_CON2 0x023E
> +#define MT6397_VSRMCA15_CON3 0x0240
> +#define MT6397_VSRMCA15_CON4 0x0242
> +#define MT6397_VSRMCA15_CON5 0x0244
> +#define MT6397_VSRMCA15_CON6 0x0246
> +#define MT6397_VSRMCA15_CON7 0x0248
> +#define MT6397_VSRMCA15_CON8 0x024A
> +#define MT6397_VSRMCA15_CON9 0x024C
> +#define MT6397_VSRMCA15_CON10 0x024E
> +#define MT6397_VSRMCA15_CON11 0x0250
> +#define MT6397_VSRMCA15_CON12 0x0252
> +#define MT6397_VSRMCA15_CON13 0x0254
> +#define MT6397_VSRMCA15_CON14 0x0256
> +#define MT6397_VSRMCA15_CON15 0x0258
> +#define MT6397_VSRMCA15_CON16 0x025A
> +#define MT6397_VSRMCA15_CON17 0x025C
> +#define MT6397_VSRMCA15_CON18 0x025E
> +#define MT6397_VSRMCA15_CON19 0x0260
> +#define MT6397_VSRMCA15_CON20 0x0262
> +#define MT6397_VSRMCA15_CON21 0x0264
> +#define MT6397_VCORE_CON0 0x0266
> +#define MT6397_VCORE_CON1 0x0268
> +#define MT6397_VCORE_CON2 0x026A
> +#define MT6397_VCORE_CON3 0x026C
> +#define MT6397_VCORE_CON4 0x026E
> +#define MT6397_VCORE_CON5 0x0270
> +#define MT6397_VCORE_CON6 0x0272
> +#define MT6397_VCORE_CON7 0x0274
> +#define MT6397_VCORE_CON8 0x0276
> +#define MT6397_VCORE_CON9 0x0278
> +#define MT6397_VCORE_CON10 0x027A
> +#define MT6397_VCORE_CON11 0x027C
> +#define MT6397_VCORE_CON12 0x027E
> +#define MT6397_VCORE_CON13 0x0280
> +#define MT6397_VCORE_CON14 0x0282
> +#define MT6397_VCORE_CON15 0x0284
> +#define MT6397_VCORE_CON16 0x0286
> +#define MT6397_VCORE_CON17 0x0288
> +#define MT6397_VCORE_CON18 0x028A
> +#define MT6397_VGPU_CON0 0x028C
> +#define MT6397_VGPU_CON1 0x028E
> +#define MT6397_VGPU_CON2 0x0290
> +#define MT6397_VGPU_CON3 0x0292
> +#define MT6397_VGPU_CON4 0x0294
> +#define MT6397_VGPU_CON5 0x0296
> +#define MT6397_VGPU_CON6 0x0298
> +#define MT6397_VGPU_CON7 0x029A
> +#define MT6397_VGPU_CON8 0x029C
> +#define MT6397_VGPU_CON9 0x029E
> +#define MT6397_VGPU_CON10 0x02A0
> +#define MT6397_VGPU_CON11 0x02A2
> +#define MT6397_VGPU_CON12 0x02A4
> +#define MT6397_VGPU_CON13 0x02A6
> +#define MT6397_VGPU_CON14 0x02A8
> +#define MT6397_VGPU_CON15 0x02AA
> +#define MT6397_VGPU_CON16 0x02AC
> +#define MT6397_VGPU_CON17 0x02AE
> +#define MT6397_VGPU_CON18 0x02B0
> +#define MT6397_VIO18_CON0 0x0300
> +#define MT6397_VIO18_CON1 0x0302
> +#define MT6397_VIO18_CON2 0x0304
> +#define MT6397_VIO18_CON3 0x0306
> +#define MT6397_VIO18_CON4 0x0308
> +#define MT6397_VIO18_CON5 0x030A
> +#define MT6397_VIO18_CON6 0x030C
> +#define MT6397_VIO18_CON7 0x030E
> +#define MT6397_VIO18_CON8 0x0310
> +#define MT6397_VIO18_CON9 0x0312
> +#define MT6397_VIO18_CON10 0x0314
> +#define MT6397_VIO18_CON11 0x0316
> +#define MT6397_VIO18_CON12 0x0318
> +#define MT6397_VIO18_CON13 0x031A
> +#define MT6397_VIO18_CON14 0x031C
> +#define MT6397_VIO18_CON15 0x031E
> +#define MT6397_VIO18_CON16 0x0320
> +#define MT6397_VIO18_CON17 0x0322
> +#define MT6397_VIO18_CON18 0x0324
> +#define MT6397_VPCA7_CON0 0x0326
> +#define MT6397_VPCA7_CON1 0x0328
> +#define MT6397_VPCA7_CON2 0x032A
> +#define MT6397_VPCA7_CON3 0x032C
> +#define MT6397_VPCA7_CON4 0x032E
> +#define MT6397_VPCA7_CON5 0x0330
> +#define MT6397_VPCA7_CON6 0x0332
> +#define MT6397_VPCA7_CON7 0x0334
> +#define MT6397_VPCA7_CON8 0x0336
> +#define MT6397_VPCA7_CON9 0x0338
> +#define MT6397_VPCA7_CON10 0x033A
> +#define MT6397_VPCA7_CON11 0x033C
> +#define MT6397_VPCA7_CON12 0x033E
> +#define MT6397_VPCA7_CON13 0x0340
> +#define MT6397_VPCA7_CON14 0x0342
> +#define MT6397_VPCA7_CON15 0x0344
> +#define MT6397_VPCA7_CON16 0x0346
> +#define MT6397_VPCA7_CON17 0x0348
> +#define MT6397_VPCA7_CON18 0x034A
> +#define MT6397_VSRMCA7_CON0 0x034C
> +#define MT6397_VSRMCA7_CON1 0x034E
> +#define MT6397_VSRMCA7_CON2 0x0350
> +#define MT6397_VSRMCA7_CON3 0x0352
> +#define MT6397_VSRMCA7_CON4 0x0354
> +#define MT6397_VSRMCA7_CON5 0x0356
> +#define MT6397_VSRMCA7_CON6 0x0358
> +#define MT6397_VSRMCA7_CON7 0x035A
> +#define MT6397_VSRMCA7_CON8 0x035C
> +#define MT6397_VSRMCA7_CON9 0x035E
> +#define MT6397_VSRMCA7_CON10 0x0360
> +#define MT6397_VSRMCA7_CON11 0x0362
> +#define MT6397_VSRMCA7_CON12 0x0364
> +#define MT6397_VSRMCA7_CON13 0x0366
> +#define MT6397_VSRMCA7_CON14 0x0368
> +#define MT6397_VSRMCA7_CON15 0x036A
> +#define MT6397_VSRMCA7_CON16 0x036C
> +#define MT6397_VSRMCA7_CON17 0x036E
> +#define MT6397_VSRMCA7_CON18 0x0370
> +#define MT6397_VSRMCA7_CON19 0x0372
> +#define MT6397_VSRMCA7_CON20 0x0374
> +#define MT6397_VSRMCA7_CON21 0x0376
> +#define MT6397_VDRM_CON0 0x0378
> +#define MT6397_VDRM_CON1 0x037A
> +#define MT6397_VDRM_CON2 0x037C
> +#define MT6397_VDRM_CON3 0x037E
> +#define MT6397_VDRM_CON4 0x0380
> +#define MT6397_VDRM_CON5 0x0382
> +#define MT6397_VDRM_CON6 0x0384
> +#define MT6397_VDRM_CON7 0x0386
> +#define MT6397_VDRM_CON8 0x0388
> +#define MT6397_VDRM_CON9 0x038A
> +#define MT6397_VDRM_CON10 0x038C
> +#define MT6397_VDRM_CON11 0x038E
> +#define MT6397_VDRM_CON12 0x0390
> +#define MT6397_VDRM_CON13 0x0392
> +#define MT6397_VDRM_CON14 0x0394
> +#define MT6397_VDRM_CON15 0x0396
> +#define MT6397_VDRM_CON16 0x0398
> +#define MT6397_VDRM_CON17 0x039A
> +#define MT6397_VDRM_CON18 0x039C
> +#define MT6397_BUCK_K_CON0 0x039E
> +#define MT6397_BUCK_K_CON1 0x03A0
> +#define MT6397_ANALDO_CON0 0x0400
> +#define MT6397_ANALDO_CON1 0x0402
> +#define MT6397_ANALDO_CON2 0x0404
> +#define MT6397_ANALDO_CON3 0x0406
> +#define MT6397_ANALDO_CON4 0x0408
> +#define MT6397_ANALDO_CON5 0x040A
> +#define MT6397_ANALDO_CON6 0x040C
> +#define MT6397_ANALDO_CON7 0x040E
> +#define MT6397_DIGLDO_CON0 0x0410
> +#define MT6397_DIGLDO_CON1 0x0412
> +#define MT6397_DIGLDO_CON2 0x0414
> +#define MT6397_DIGLDO_CON3 0x0416
> +#define MT6397_DIGLDO_CON4 0x0418
> +#define MT6397_DIGLDO_CON5 0x041A
> +#define MT6397_DIGLDO_CON6 0x041C
> +#define MT6397_DIGLDO_CON7 0x041E
> +#define MT6397_DIGLDO_CON8 0x0420
> +#define MT6397_DIGLDO_CON9 0x0422
> +#define MT6397_DIGLDO_CON10 0x0424
> +#define MT6397_DIGLDO_CON11 0x0426
> +#define MT6397_DIGLDO_CON12 0x0428
> +#define MT6397_DIGLDO_CON13 0x042A
> +#define MT6397_DIGLDO_CON14 0x042C
> +#define MT6397_DIGLDO_CON15 0x042E
> +#define MT6397_DIGLDO_CON16 0x0430
> +#define MT6397_DIGLDO_CON17 0x0432
> +#define MT6397_DIGLDO_CON18 0x0434
> +#define MT6397_DIGLDO_CON19 0x0436
> +#define MT6397_DIGLDO_CON20 0x0438
> +#define MT6397_DIGLDO_CON21 0x043A
> +#define MT6397_DIGLDO_CON22 0x043C
> +#define MT6397_DIGLDO_CON23 0x043E
> +#define MT6397_DIGLDO_CON24 0x0440
> +#define MT6397_DIGLDO_CON25 0x0442
> +#define MT6397_DIGLDO_CON26 0x0444
> +#define MT6397_DIGLDO_CON27 0x0446
> +#define MT6397_DIGLDO_CON28 0x0448
> +#define MT6397_DIGLDO_CON29 0x044A
> +#define MT6397_DIGLDO_CON30 0x044C
> +#define MT6397_DIGLDO_CON31 0x044E
> +#define MT6397_DIGLDO_CON32 0x0450
> +#define MT6397_DIGLDO_CON33 0x045A
> +#define MT6397_SPK_CON0 0x0600
> +#define MT6397_SPK_CON1 0x0602
> +#define MT6397_SPK_CON2 0x0604
> +#define MT6397_SPK_CON3 0x0606
> +#define MT6397_SPK_CON4 0x0608
> +#define MT6397_SPK_CON5 0x060A
> +#define MT6397_SPK_CON6 0x060C
> +#define MT6397_SPK_CON7 0x060E
> +#define MT6397_SPK_CON8 0x0610
> +#define MT6397_SPK_CON9 0x0612
> +#define MT6397_SPK_CON10 0x0614
> +#define MT6397_SPK_CON11 0x0616
> +#define MT6397_AUDDAC_CON0 0x0700
> +#define MT6397_AUDBUF_CFG0 0x0702
> +#define MT6397_AUDBUF_CFG1 0x0704
> +#define MT6397_AUDBUF_CFG2 0x0706
> +#define MT6397_AUDBUF_CFG3 0x0708
> +#define MT6397_AUDBUF_CFG4 0x070A
> +#define MT6397_IBIASDIST_CFG0 0x070C
> +#define MT6397_AUDACCDEPOP_CFG0 0x070E
> +#define MT6397_AUD_IV_CFG0 0x0710
> +#define MT6397_AUDCLKGEN_CFG0 0x0712
> +#define MT6397_AUDLDO_CFG0 0x0714
> +#define MT6397_AUDLDO_CFG1 0x0716
> +#define MT6397_AUDNVREGGLB_CFG0 0x0718
> +#define MT6397_AUD_NCP0 0x071A
> +#define MT6397_AUDPREAMP_CON0 0x071C
> +#define MT6397_AUDADC_CON0 0x071E
> +#define MT6397_AUDADC_CON1 0x0720
> +#define MT6397_AUDADC_CON2 0x0722
> +#define MT6397_AUDADC_CON3 0x0724
> +#define MT6397_AUDADC_CON4 0x0726
> +#define MT6397_AUDADC_CON5 0x0728
> +#define MT6397_AUDADC_CON6 0x072A
> +#define MT6397_AUDDIGMI_CON0 0x072C
> +#define MT6397_AUDLSBUF_CON0 0x072E
> +#define MT6397_AUDLSBUF_CON1 0x0730
> +#define MT6397_AUDENCSPARE_CON0 0x0732
> +#define MT6397_AUDENCCLKSQ_CON0 0x0734
> +#define MT6397_AUDPREAMPGAIN_CON0 0x0736
> +#define MT6397_ZCD_CON0 0x0738
> +#define MT6397_ZCD_CON1 0x073A
> +#define MT6397_ZCD_CON2 0x073C
> +#define MT6397_ZCD_CON3 0x073E
> +#define MT6397_ZCD_CON4 0x0740
> +#define MT6397_ZCD_CON5 0x0742
> +#define MT6397_NCP_CLKDIV_CON0 0x0744
> +#define MT6397_NCP_CLKDIV_CON1 0x0746
> +
> +#endif /* __MFD_MT6397_REGISTERS_H__ */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD
2015-01-20 14:43 ` Lee Jones
@ 2015-01-20 15:05 ` Sascha Hauer
2015-01-20 15:33 ` Lee Jones
0 siblings, 1 reply; 10+ messages in thread
From: Sascha Hauer @ 2015-01-20 15:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi Lee,
On Tue, Jan 20, 2015 at 02:43:09PM +0000, Lee Jones wrote:
> On Fri, 26 Dec 2014, Flora Fu wrote:
>
> > Add core files for MT6397 MFD driver.
> >
> > Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> > ---
> > drivers/mfd/Kconfig | 10 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/mt6397-core.c | 94 +++++++++
> > include/linux/mfd/mt6397/core.h | 23 +++
> > include/linux/mfd/mt6397/registers.h | 362 +++++++++++++++++++++++++++++++++++
> > 5 files changed, 490 insertions(+)
> > create mode 100644 drivers/mfd/mt6397-core.c
> > create mode 100644 include/linux/mfd/mt6397/core.h
> > create mode 100644 include/linux/mfd/mt6397/registers.h
>
> Looks okay.
>
> I assume there are dependancies on this patch. What are they?
>
> How would you like this set to be handled?
This patch is outdated, I sent an updated series today (you are on Cc).
There are no compile time dependencies to the PMIC wrapper, but without
it the mfd part is pretty useless. I prefer to keep the series together
and merge it through arm-soc, but I would be fine with merging it
through mfd aswell.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD
2015-01-20 15:05 ` Sascha Hauer
@ 2015-01-20 15:33 ` Lee Jones
0 siblings, 0 replies; 10+ messages in thread
From: Lee Jones @ 2015-01-20 15:33 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 20 Jan 2015, Sascha Hauer wrote:
> Hi Lee,
>
> On Tue, Jan 20, 2015 at 02:43:09PM +0000, Lee Jones wrote:
> > On Fri, 26 Dec 2014, Flora Fu wrote:
> >
> > > Add core files for MT6397 MFD driver.
> > >
> > > Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> > > ---
> > > drivers/mfd/Kconfig | 10 +
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/mt6397-core.c | 94 +++++++++
> > > include/linux/mfd/mt6397/core.h | 23 +++
> > > include/linux/mfd/mt6397/registers.h | 362 +++++++++++++++++++++++++++++++++++
> > > 5 files changed, 490 insertions(+)
> > > create mode 100644 drivers/mfd/mt6397-core.c
> > > create mode 100644 include/linux/mfd/mt6397/core.h
> > > create mode 100644 include/linux/mfd/mt6397/registers.h
> >
> > Looks okay.
> >
> > I assume there are dependancies on this patch. What are they?
> >
> > How would you like this set to be handled?
>
> This patch is outdated, I sent an updated series today (you are on Cc).
Okay, thanks.
> There are no compile time dependencies to the PMIC wrapper, but without
> it the mfd part is pretty useless. I prefer to keep the series together
> and merge it through arm-soc, but I would be fine with merging it
> through mfd aswell.
Yes, everyone feels the same about their cross-subsystem patch-sets. ;)
If there are build-time dependencies I am always happy to take sets
in via MFD and send out pull-requests to other subsystem Maintainers;
however, if there are only run-time dependencies I prefer to save
everyone the hassle and have them go in via their own subsystems.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-01-20 15:33 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-26 7:09 [PATCH v4 0/6] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
2014-12-26 7:09 ` [PATCH v4 1/6] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Flora Fu
2014-12-26 7:09 ` [PATCH v4 2/6] mfd: MT6397: Add support for PMIC MT6397 MFD Flora Fu
2015-01-20 14:43 ` Lee Jones
2015-01-20 15:05 ` Sascha Hauer
2015-01-20 15:33 ` Lee Jones
2014-12-26 7:09 ` [PATCH v4 3/6] dt-bindings:: Add document for MT8135 PMIC Wrapper Flora Fu
2014-12-26 7:09 ` [PATCH v4 4/6] dt-bindings: Add document for MT6397 MFD Flora Fu
2014-12-26 7:09 ` [PATCH v4 5/6] arm: dts: mt8135: Add support for MT8135 PMIC wrapper Flora Fu
2014-12-26 7:09 ` [PATCH v4 6/6] arm: dts: mt8135: Add support for MT6397 MFD and regulator Flora Fu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).