From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Wed, 21 Jan 2015 09:26:22 +0100 Subject: [PATCH 8/8] regulator: MT6397: Add support for MT6397 regulator In-Reply-To: <1421747231-554-9-git-send-email-s.hauer@pengutronix.de> References: <1421747231-554-1-git-send-email-s.hauer@pengutronix.de> <1421747231-554-9-git-send-email-s.hauer@pengutronix.de> Message-ID: <20150121082622.GG18908@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jan 20, 2015 at 10:47:11AM +0100, Sascha Hauer wrote: > From: Flora Fu > > This adds support for the regulators on the MediaTek MT6397 > Multifunction device. > > Signed-off-by: Flora Fu, MediaTek > Signed-off-by: Sascha Hauer > Cc: Liam Girdwood > Cc: Mark Brown > --- > Documentation/devicetree/bindings/mfd/mt6397.txt | 41 ++- > .../bindings/regulator/mt6397-regulator.txt | 217 ++++++++++++++ > drivers/regulator/Kconfig | 9 + > drivers/regulator/Makefile | 1 + > drivers/regulator/mt6397-regulator.c | 332 +++++++++++++++++++++ > include/linux/regulator/mt6397-regulator.h | 49 +++ > 6 files changed, 626 insertions(+), 23 deletions(-) > create mode 100644 Documentation/devicetree/bindings/regulator/mt6397-regulator.txt > create mode 100644 drivers/regulator/mt6397-regulator.c > create mode 100644 include/linux/regulator/mt6397-regulator.h > > diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt I'll move this documentation update to the patch adding the MFD driver where it belongs to. I'll drop the reset of this patch since it's already in Linux-next. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |