From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] drm/i2c: tda998x: Set the CEC I2C address based on the slave I2C address.
Date: Wed, 21 Jan 2015 18:46:58 +0000 [thread overview]
Message-ID: <20150121184658.GX26493@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <20150121184405.GI10762@e106497-lin.cambridge.arm.com>
On Wed, Jan 21, 2015 at 06:44:05PM +0000, Liviu Dudau wrote:
> On Fri, Nov 07, 2014 at 08:31:25AM +0000, Andrew Jackson wrote:
> > The I2C address for the TDA9989 and TDA19989 is fixed at 0x34
> > but the two LSBs of the TDA19988's address are set by two configuration
> > pins on the chip. Irrespective of the chip, the associated CEC
> > peripheral's I2C address is based upon the main I2C address.
> >
> > This patch avoids any special handling required to support
> > systems that contain multiple TDA19988 devices on the same
> > I2C bus.
> >
> > Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
>
> Hi Andrew,
>
> What is the status of this patch? Is it going to be pulled by anyone?
It's been sent to David.
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2015-01-21 18:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 8:31 [PATCH v2] drm/i2c: tda998x: Set the CEC I2C address based on the slave I2C address Andrew Jackson
2015-01-21 18:44 ` Liviu Dudau
2015-01-21 18:46 ` Russell King - ARM Linux [this message]
2015-01-21 19:15 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150121184658.GX26493@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).