[GIT PULL 1/3] drop legacy booting for omap3517

[GIT PULL 1/3] drop legacy booting for omap3517

[Tony Lindgren]

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/drop-legacy-3517-v2

for you to fetch changes up to 549f95ed20168daa06901054a028e185ebb905ab:

  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC (2015-01-20 08:49:08 -0800)

----------------------------------------------------------------
We have had omap3517 booting in device tree mode for quite some
time now and we have at least a minimal dts file for the 3517
based boards. Also almost all the drivers are usable in device
tree mode. And if there are any drivers not yet supported in device
tree mode, those can be enabled using pdata quirks.

This leaves omap3430 to omap3730 as the only remaining mach-omap2
platforms still booting in legacy mode also. For those were are
printing a warning during the boot to get people to update their
systems to boot in device tree mode and slowly converting them
over to device tree based booting.

----------------------------------------------------------------
Tony Lindgren (5):
      ARM: OMAP3: Remove legacy support for am3517-evm
      ARM: OMAP3: Remove legacy support for am3517crane
      ARM: OMAP3: Remove cm-t3517 legacy support
      ARM: OMAP3: Remove legacy support for am35xx-emac
      ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC

 arch/arm/mach-omap2/Kconfig                |  12 -
 arch/arm/mach-omap2/Makefile               |   8 -
 arch/arm/mach-omap2/am35xx-emac.c          | 114 ---------
 arch/arm/mach-omap2/am35xx-emac.h          |  15 --
 arch/arm/mach-omap2/am35xx.h               |  46 ----
 arch/arm/mach-omap2/board-am3517crane.c    | 150 ------------
 arch/arm/mach-omap2/board-am3517evm.c      | 373 -----------------------------
 arch/arm/mach-omap2/board-cm-t3517.c       | 335 --------------------------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |  33 +--
 arch/arm/mach-omap2/pdata-quirks.c         |   1 -
 10 files changed, 2 insertions(+), 1085 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/am35xx-emac.c
 delete mode 100644 arch/arm/mach-omap2/am35xx-emac.h
 delete mode 100644 arch/arm/mach-omap2/am35xx.h
 delete mode 100644 arch/arm/mach-omap2/board-am3517crane.c
 delete mode 100644 arch/arm/mach-omap2/board-am3517evm.c
 delete mode 100644 arch/arm/mach-omap2/board-cm-t3517.c

[GIT PULL 2/3] omap defconfig changes for v3.20

[Tony Lindgren]

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/defconfig-modular

for you to fetch changes up to 697549cdd637841e7c88d0014fe25dfbb72565de:

  ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support (2015-01-20 09:46:31 -0800)

----------------------------------------------------------------
Defconfig changes for omap2plus_defconfig to make it more modular,
and to add few more drivers found on various boards.

----------------------------------------------------------------
Felipe Balbi (2):
      ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig
      ARM: omap2plus_defconfig: enable TPS65218 power button

Nishanth Menon (1):
      ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform

Sjoerd Simons (1):
      ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support

Tony Lindgren (3):
      ARM: omap2plus_defconfig: Enable support for davinci_emac
      ARM: omap2plus_defconfig: Add NOR flash support
      ARM: omap2plus_defconfig: Enable pcf857x

 arch/arm/configs/omap2plus_defconfig | 128 +++++++++++++++++++++++------------
 1 file changed, 84 insertions(+), 44 deletions(-)

[GIT PULL 3/3] omap device tree changes for v3.20, part 2

[Tony Lindgren]

The following changes since commit 7300bfff886a1340cfeb252035303e265cd556d9:

  ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt2

for you to fetch changes up to 1f43c45df7afb706470f7d81d983dd7763a9452f:

  ARM: dts: dra72-evm: Add qspi device (2015-01-20 10:07:25 -0800)

----------------------------------------------------------------
More changes for omap dts files mostly to add support for
dm816x devices and clocks. Also adds a qspi device for
dra72x-evm.

----------------------------------------------------------------
Mugunthan V N (1):
      ARM: dts: dra72-evm: Add qspi device

Tony Lindgren (3):
      ARM: dts: Add basic dm816x device tree configuration
      ARM: dts: Add basic clocks for dm816x
      ARM: dts: Add minimal support for dm8168-evm

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/dm8168-evm.dts     | 129 ++++++++++++
 arch/arm/boot/dts/dm816x-clocks.dtsi | 250 ++++++++++++++++++++++
 arch/arm/boot/dts/dm816x.dtsi        | 387 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra72-evm.dts      |  77 +++++++
 include/dt-bindings/pinctrl/omap.h   |   1 +
 6 files changed, 845 insertions(+)
 create mode 100644 arch/arm/boot/dts/dm8168-evm.dts
 create mode 100644 arch/arm/boot/dts/dm816x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/dm816x.dtsi

[GIT PULL 2/3] omap defconfig changes for v3.20

[Olof Johansson]

On Tue, Jan 20, 2015 at 10:25:39AM -0800, Tony Lindgren wrote:
> The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
> 
>   Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/defconfig-modular
> 
> for you to fetch changes up to 697549cdd637841e7c88d0014fe25dfbb72565de:
> 
>   ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support (2015-01-20 09:46:31 -0800)
> 
> ----------------------------------------------------------------
> Defconfig changes for omap2plus_defconfig to make it more modular,
> and to add few more drivers found on various boards.

Merged, thanks.

BTW, please remember to enable drivers in the multi_v7 defconfigs too
where it makes sense. Not sure if any of these fall in that category,
I didn't check closely.


-Olof

[GIT PULL 3/3] omap device tree changes for v3.20, part 2

[Olof Johansson]

On Tue, Jan 20, 2015 at 10:25:40AM -0800, Tony Lindgren wrote:
> The following changes since commit 7300bfff886a1340cfeb252035303e265cd556d9:
> 
>   ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt2
> 
> for you to fetch changes up to 1f43c45df7afb706470f7d81d983dd7763a9452f:
> 
>   ARM: dts: dra72-evm: Add qspi device (2015-01-20 10:07:25 -0800)
> 
> ----------------------------------------------------------------
> More changes for omap dts files mostly to add support for
> dm816x devices and clocks. Also adds a qspi device for
> dra72x-evm.
> 


Merged, thanks.


-Olof

[GIT PULL 2/3] omap defconfig changes for v3.20

[Tony Lindgren]

* Olof Johansson <olof@lixom.net> [150123 13:50]:
> On Tue, Jan 20, 2015 at 10:25:39AM -0800, Tony Lindgren wrote:
> > The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
> > 
> >   Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/defconfig-modular
> > 
> > for you to fetch changes up to 697549cdd637841e7c88d0014fe25dfbb72565de:
> > 
> >   ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support (2015-01-20 09:46:31 -0800)
> > 
> > ----------------------------------------------------------------
> > Defconfig changes for omap2plus_defconfig to make it more modular,
> > and to add few more drivers found on various boards.
> 
> Merged, thanks.
> 
> BTW, please remember to enable drivers in the multi_v7 defconfigs too
> where it makes sense. Not sure if any of these fall in that category,
> I didn't check closely.

Sure I'll do a patch to add the same driver modules to multi_v7 too.

Regards,

Tony