[PATCH v13 3/6] clk: Make clk API return per-user struct clk instances

[tony@atomide.com (Tony Lindgren)]

* Tero Kristo <t-kristo@ti.com> [150202 11:35]:
> On 02/01/2015 11:24 PM, Mike Turquette wrote:
> >Quoting Tomeu Vizoso (2015-01-23 03:03:30)
> >
> >AFAICT this doesn't break anything, but booting on OMAP3+ results in
> >noisy WARNs.
> >
> >I think the correct fix is to replace clk_bypass and clk_ref pointers
> >with a simple integer parent_index. In fact we already have this index.
> >See how the pointers are populated in ti_clk_register_dpll:
> 
> The problem is we still need to be able to get runtime parent clock rates
> (the parent rate may change also), so simple index value is not sufficient.
> We need a handle of some sort to the bypass/ref clocks. The DPLL code
> generally requires knowledge of the bypass + reference clock rates to work
> properly, as it calculates the M/N values based on these.
> 
> Shall I change the DPLL code to check against clk_hw pointers or what is the
> preferred approach here? The patch at the end does this and fixes the dpll
> related warnings.
> 
> Btw, the rate constraints patch broke boot for me completely, but sounds
> like you reverted it already.

Thanks Tero, looks like your fix fixes all the issues I'm seeing with
commit 59cf3fcf9baf. That is noisy dmesg, dpll_abe_ck not locking
on 4430sdp, and off-idle not working for omap3.

I could not get the patch to apply, below is what I applied manually.

Mike, If possible, maybe fold this into 59cf3fcf9baf? It applies with
some fuzz on that too. And inn that case, please feel also to add the
following for Tomeu's patch:

Tested-by: Tony Lindgren <tony@atomide.com>

8<------------
From: Tero Kristo <t-kristo@ti.com>
Date: Mon, 2 Feb 2015 12:17:00 -0800
Subject: [PATCH] ARM: OMAP3+: clock: dpll: fix logic for comparing parent clocks

DPLL code uses reference and bypass clock pointers for determining runtime
properties for these clocks, like parent clock rates.
As clock API now returns per-user clock structs, using a global handle
in the clock driver code does not work properly anymore. Fix this by
using the clk_hw instead, and comparing this against the parents.

Fixes: 59cf3fcf9baf ("clk: Make clk API return per-user struct clk instances")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony at atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -410,7 +410,7 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	int r;
 	struct dpll_data *dd;
-	struct clk *parent;
+	struct clk_hw *parent;
 
 	dd = clk->dpll_data;
 	if (!dd)
@@ -427,13 +427,13 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 		}
 	}
 
-	parent = __clk_get_parent(hw->clk);
+	parent = __clk_get_hw(__clk_get_parent(hw->clk));
 
 	if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
-		WARN_ON(parent != dd->clk_bypass);
+		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
-		WARN_ON(parent != dd->clk_ref);
+		WARN_ON(parent != __clk_get_hw(dd->clk_ref));
 		r = _omap3_noncore_dpll_lock(clk);
 	}
 
@@ -549,7 +549,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!dd)
 		return -EINVAL;
 
-	if (__clk_get_parent(hw->clk) != dd->clk_ref)
+	if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+	    __clk_get_hw(dd->clk_ref))
 		return -EINVAL;
 
 	if (dd->last_rounded_rate == 0)