[PATCH V2 RESEND] clk: mxs: Fix invalid 32-bit access to frac registers

[mturquette@linaro.org (Mike Turquette)]

Quoting Fabio Estevam (2015-01-30 11:28:32)
> On Fri, Jan 30, 2015 at 5:20 PM, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> > According to i.MX23 and i.MX28 reference manual [1],[2] the fractional
> > clock control register is 32-bit wide, but is separated in 4 parts.
> > So write instructions must not apply to more than 1 part at once.
> >
> > The clk init for the i.MX28 violates this restriction and all the other
> > accesses on that register suggest that there isn't such a restriction.
> >
> > This patch restricts the access to this register to byte instructions and
> > extends the comment in the init functions.
> >
> > Btw the imx23 init now uses a R-M-W sequence just like imx28 init
> > to avoid any clock glitches.
> >
> > The changes has been tested with a i.MX23 and a i.MX28 board.
> >
> > [1] - http://cache.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf
> > [2] - http://cache.freescale.com/files/dsp/doc/ref_manual/MCIMX28RM.pdf
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> > Reviewed-by: Marek Vasut <marex@denx.de>
> 
> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>

Applied to clk-next.

Thanks,
Mike

> 
> Thanks