From mboxrd@z Thu Jan  1 00:00:00 1970
From: computersforpeace@gmail.com (Brian Norris)
Date: Sun, 8 Feb 2015 00:35:14 -0800
Subject: [PATCH v8 0/2] mtd: hisilicon: add a new driver for NAND
 controller of hisilicon hip04 Soc
In-Reply-To: <1422183194-10148-1-git-send-email-wangzhou1@hisilicon.com>
References: <1422183194-10148-1-git-send-email-wangzhou1@hisilicon.com>
Message-ID: <20150208083514.GD3670@norris-Latitude-E6410>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Sun, Jan 25, 2015 at 06:53:12PM +0800, Zhou Wang wrote:
> This patchset adds the support for NAND controller of hisilicon hip04 Soc.
> The NAND controller IP was developed by hisilicon and needs a new driver to
> support it. This patchset is based on l2-mtd/master.
> 
> I have tested this NAND flash controller driver in Hip04 D01 board using MTD
> test modules. All testes passed except mtd_nandbiterrs. The reason is that this
> NAND controller doesn't support to write raw page in ECC mode. In the test of
> mtd_nandbiterrs, when rewriting raw page(with some bits changed) back, this NAND
> controller will also produce ECC codes and write into NAND flash OOB area. As
> ECC codes in OOB area have been broken, read error comes out as follow.
> 
> Hi Brian,
> 
> As the patch have been reviewed for some time, could you consider to take this
> driver for v3.20? If there is something still not good, please let me know.

It's all looking good. Pushed to l2-mtd.git, probably for 3.20. I have
one or two small comments that may be worth thinking about though.

Brian