From mboxrd@z Thu Jan 1 00:00:00 1970 From: mark.rutland@arm.com (Mark Rutland) Date: Tue, 10 Feb 2015 13:28:36 +0000 Subject: [PATCH v3 2/5] Documentation: dt-bindings: add dt binding info for hi6220 In-Reply-To: <1423554627-694-3-git-send-email-zhangfei.gao@linaro.org> References: <1423554627-694-1-git-send-email-zhangfei.gao@linaro.org> <1423554627-694-3-git-send-email-zhangfei.gao@linaro.org> Message-ID: <20150210132836.GB9432@leverpostej> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Feb 10, 2015 at 07:50:24AM +0000, Zhangfei Gao wrote: > Signed-off-by: Zhangfei Gao > --- > .../devicetree/bindings/usb/hi6220-usb.txt | 49 ++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt > > diff --git a/Documentation/devicetree/bindings/usb/hi6220-usb.txt b/Documentation/devicetree/bindings/usb/hi6220-usb.txt > new file mode 100644 > index 0000000..b8278de > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/hi6220-usb.txt > @@ -0,0 +1,49 @@ > +Hisilicon hi6220 SoC USB controller > +----------------------------- > + > +usb controller is inherited from dwc2, refer dwc2.txt > +----- > + > +Required properties: > +- compatible: "hisilicon,hi6220-usb" > +Refer to dwc2.txt for dwc2 usb properties > + > + > +PHY: > +----- > + > +Required properties: > +- compatible: "hisilicon,hi6220-usb-phy" > +- vcc-supply: phandle to the regulator that provides power to the PHY. > +- clocks: phandle and clock specifier of the PHY clock. > +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. > +- hisilicon,gpio-vbus: gpio of detecting vbus. > +- hisilicon,gpio-id: gpio of detecting id. These should be vbus-gpios and id-gpios respectively. > + > +Example: > + > + peripheral_ctrl: syscon at f7030000 { > + compatible = "syscon"; > + reg = <0x0 0xf7030000 0x0 0x1000>; > + }; We should have a real string for this in addition to "syscon". Thanks, Mark.