MUSB dual-role on AM335x behaving weirdly

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Tue, Feb 24, 2015 at 11:33:57AM -0600, Felipe Balbi wrote:
> Hi,
> 
> On Tue, Feb 24, 2015 at 05:50:50PM +0100, Maxime Ripard wrote:
> > Hi Felipe,
> > 
> > On Tue, Feb 24, 2015 at 08:54:01AM -0600, Felipe Balbi wrote:
> > > Hi,
> > > 
> > > On Tue, Feb 24, 2015 at 11:39:11AM +0100, Maxime Ripard wrote:
> > > > On Thu, Feb 05, 2015 at 02:21:42PM +0100, Maxime Ripard wrote:
> > > > > Hi,
> > > > > 
> > > > > On Thu, Jan 22, 2015 at 08:37:45AM +0100, Yegor Yefremov wrote:
> > > > > > I have the same experience with 3.15. The switching is working when
> > > > > > CONFIG_USB_MUSB_DUAL_ROLE is set and dr_mode = "otg". But since 3.16
> 
> since 3.16 ?

That's what Yegor said. I never saw it working with 3.15 either.

> > > > > > it seems to be broken. Still had no time to bisect this.
> > > > > 
> > > > > I've been giving a few versions (from v3.15 to Tuesday's linux-next) a
> > > > > try, and I always see the same behaviour now:
> > > > > 
> > > > >   - Booting as a gadget (ie, with a USB cable plugged in), and
> > > > >     swapping the cable for a (real, this time) USB OTG cable with a
> > > > >     USB key never works. When the device is plugged, all I get is
> > > > > 
> > > > > [  262.944846] usb 1-1: new high-speed USB device number 2 using musb-hdrc
> > > > > [  278.064748] usb 1-1: device descriptor read/64, error -110
> > > > > 
> > > > >     Putting in back in gadget results with a load of continuous:
> > > > > [  315.258839] musb_bus_suspend 2484: trying to suspend as a_wait_vfall while active
> > > > > 
> > > > >   - Booting as a host, or with nothing connected to it actually work,
> > > > >     up to a few plug-a-device-then-plug-a-host cycles, where you end
> > > > >     up with the following logs when disconnecting the device (somehow,
> > > > >     it always happens when it is set in host mode).
> > > > > 
> > > > > [   12.969075] CAUTION: musb: Babble Interrupt Occurred
> > > > > [   12.974445] CAUTION: musb: Babble Interrupt Occurred
> > > > > [   12.979637] musb_stage0_irq 789: unhandled DISCONNECT transition (a_wait_bcon)
> > > > > [   12.988498] usb 1-1: USB disconnect, device number 2
> > > > > [   13.071849] musb-hdrc musb-hdrc.0.auto: Restarting MUSB to recover from Babble
> > > > > 
> > > > >     Plugging back our USB cable, with the AM335x acting as a device
> > > > >     work once. Then, when it switches to the host mode, we end up with
> > > > >     the same scenario than in the coldplug as gadget case: USB read
> > > > >     error, before then having all the a_wait_vfall messages.
> > > > 
> > > > Guys, any ideas/hints?
> > > 
> > > which platform are you using ? I guess the only way to move here would
> > > be to bisect between 3.15 and 3.16 to find the offending commit.
> > 
> > 3.15 didn't work either unfortunately. I had the behaviour described
> > above on all kernel between 3.15 and a 4.0-rc1-ish.
> > 
> > This is on an custom design based on the am335x.
> 
> has it ever worked ? I don't have a board here which can do dual role.
> BBB has a mini-B only on the peripheral port.

I don't know if it ever worked.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150225/a871dc57/attachment.sig>