[PATCH v4] ARM: dts: add bcm2835-pwm bindings

[lee.jones@linaro.org (Lee Jones)]

On Thu, 15 Jan 2015, Bart Tanghe wrote:

> To probe the bcm2835-pwm driver properly, this dts bindings has to be added 
> to the bcm2835 dtsi file.
> In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding. 
> ---
> Changes in v4:
>  - node added by reg value  
> 
> Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be>
> Acked-by: Stephen Warren <swarren@wwwdotorg.org>

Applied, thanks.

> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> index 3342cb1..e8a0f13 100644
> --- a/arch/arm/boot/dts/bcm2835.dtsi
> +++ b/arch/arm/boot/dts/bcm2835.dtsi
> @@ -122,6 +123,14 @@
>  			status = "disabled";
>  		};
>  
> +                pwm: pwm at 7e20c000 {
> +                        compatible = "brcm,bcm2835-pwm";
> +                        reg = <0x7e20c000 0x28>;
> +                        clocks = <&clk_pwm>;
> +                        #pwm-cells = <2>;
> +                        status = "disabled";
> +                };
> +
>  		sdhci: sdhci at 7e300000 {
>  			compatible = "brcm,bcm2835-sdhci";
>  			reg = <0x7e300000 0x100>;
> @@ -179,5 +188,13 @@
>  			clock-output-names = "spi";
>  			clock-frequency = <250000000>;
>  		};
> +
> +		clk_pwm: clock at 3 {
> +			compatible = "fixed-clock";
> +			reg = <3>;
> +			#clock-cells = <0>;
> +			clock-output-names = "pwm";
> +			clock-frequency = <9200000>;
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog