[PATCH v6 6/8] input: touchscreen: imx25 tcq driver

[mpa@pengutronix.de (Markus Pargmann)]

Hi,

On Mon, Feb 02, 2015 at 09:51:34AM -0800, Dmitry Torokhov wrote:
> On Mon, Feb 02, 2015 at 05:05:39PM +0100, Markus Pargmann wrote:
> > Hi,
> > 
> > On Fri, Jan 30, 2015 at 10:57:21AM -0800, Dmitry Torokhov wrote:
> > > On Thu, Jan 29, 2015 at 07:56:40PM +0530, Varka Bhadram wrote:
> > > > Hi,
> > > > 
> > > > On Thursday 29 January 2015 07:39 PM, Markus Pargmann wrote:
> > > > >This is a driver for the imx25 ADC/TSC module. It controls the
> > > > >touchscreen conversion queue and creates a touchscreen input device.
> > > > >The driver currently only supports 4 wire touchscreens. The driver uses
> > > > >a simple conversion queue of precharge, touch detection, X measurement,
> > > > >Y measurement, precharge and another touch detection.
> > > > >
> > > > >This driver uses the regmap from the parent to setup some touch specific
> > > > >settings in the core driver and setup a idle configuration with touch
> > > > >detection.
> > > > >
> > > > >Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > > > >Signed-off-by: Denis Carikli <denis@eukrea.com>
> > > > >Acked-by: Dmitry Torokhov <dtor@vmware.com>
> > > > >Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > > > >---
> > > > >  drivers/input/touchscreen/Kconfig         |   6 +
> > > > >  drivers/input/touchscreen/Makefile        |   1 +
> > > > >  drivers/input/touchscreen/fsl-imx25-tcq.c | 587 ++++++++++++++++++++++++++++++
> > > > >  3 files changed, 594 insertions(+)
> > > > >  create mode 100644 drivers/input/touchscreen/fsl-imx25-tcq.c
> > > > >
> > > > (...)
> > > > 
> > > > >+	ret = request_threaded_irq(priv->irq, mx25_tcq_irq, mx25_tcq_irq_thread,
> > > > >+				   IRQF_ONESHOT, pdev->name, priv);
> > > > 
> > > > We can use devres API for request_thread_irq()...
> > > > 
> > > > >+	if (ret) {
> > > > >+		dev_err(dev, "Failed requesting IRQ\n");
> > > > >+		goto err_clk_unprepare;
> > > > >+	}
> > > > >+
> > > > >+	ret = mx25_tcq_init(priv);
> > > > >+	if (ret) {
> > > > >+		dev_err(dev, "Failed to init tcq\n");
> > > > >+		goto error_free_irq;
> > > > >+	}
> > > > >+
> > > > >+	platform_set_drvdata(pdev, priv);
> > > > >+
> > > > >+	return 0;
> > > > >+
> > > > >+error_free_irq:
> > > > >+	free_irq(priv->irq, priv);
> > > > 
> > > > This is not required if we use devres API
> > > 
> > > Yes it does - you do not really want to stop clocks in the middle of
> > > servicing interrupt.
> > 
> > Thanks, I missed the clocks. I will not use devm here then.
> 
> Actually, you still can if you move clock enabling/disabling and
> mx25_tcq_init() into input_dev->open() and ->close() callbacks. Close
> will be called during input device un-registration which happens (given
> your current sequence) after freeing irq by devm.

Thank you. I now moved that code into open() and close(), replaced the
irq_request() with devm_irq_request. mx25_tcq_remove() is gone now.

> 
> By the way, I used my old @vmware address by accident. Can you please
> replace the original acked by with:
> 
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replaced it.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150226/38528ef2/attachment.sig>