From mboxrd@z Thu Jan  1 00:00:00 1970
From: lina.iyer@linaro.org (Lina Iyer)
Date: Fri, 27 Feb 2015 13:00:31 -0700
Subject: [PATCH 2/2] qcom: scm: Add scm_set_warm_boot_addr function
In-Reply-To: <7h7fv4bjcf.fsf@deeprootsystems.com>
References: <1424904852-12719-1-git-send-email-lina.iyer@linaro.org>
 <1424904852-12719-3-git-send-email-lina.iyer@linaro.org>
 <7h7fv4bjcf.fsf@deeprootsystems.com>
Message-ID: <20150227200031.GD1678@linaro.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Feb 26 2015 at 11:47 -0700, Kevin Hilman wrote:
>Lina Iyer <lina.iyer@linaro.org> writes:
>
>> A core can be powered down for cpuidle or when it is hotplugged of.
>
>s/of/off/ ?
>

Thanks, took care of it.

>> In
>> either case, the warmboot return address would be different. Allow
>> setting the warmboot address for a specific cpu, optimize and write to
>> the firmware if the address is different than the previously set
>> address.
>>
>> Also we do not need to export the warmboot flags. Move them into the
>> implementation file.
>>
>> Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
>> ---
>>  arch/arm/mach-qcom/scm-boot.c | 38 ++++++++++++++++++++++++++++++++++++++
>>  arch/arm/mach-qcom/scm-boot.h |  7 +++----
>>  2 files changed, 41 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
>> index 45cee3e..cb73134 100644
>> --- a/arch/arm/mach-qcom/scm-boot.c
>> +++ b/arch/arm/mach-qcom/scm-boot.c
>> @@ -1,4 +1,5 @@
>>  /* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
>> + * Copyright (c) 2014, Linaro Ltd.
>>   *
>>   * This program is free software; you can redistribute it and/or modify
>>   * it under the terms of the GNU General Public License version 2 and
>> @@ -21,6 +22,23 @@
>>  #include "scm.h"
>>  #include "scm-boot.h"
>>
>> +#define SCM_FLAG_WARMBOOT_CPU0		0x04
>> +#define SCM_FLAG_WARMBOOT_CPU1		0x02
>> +#define SCM_FLAG_WARMBOOT_CPU2		0x10
>> +#define SCM_FLAG_WARMBOOT_CPU3		0x40
>> +
>> +struct scm_warmboot {
>> +	int flag;
>> +	void *entry;
>> +};
>> +
>> +static struct scm_warmboot scm_flags[] = {
>> +	{ .flag = SCM_FLAG_WARMBOOT_CPU0 },
>> +	{ .flag = SCM_FLAG_WARMBOOT_CPU1 },
>> +	{ .flag = SCM_FLAG_WARMBOOT_CPU2 },
>> +	{ .flag = SCM_FLAG_WARMBOOT_CPU3 },
>> +};
>> +
>>  /*
>>   * Set the cold/warm boot address for one of the CPU cores.
>>   */
>> @@ -31,9 +49,29 @@ int scm_set_boot_addr(phys_addr_t addr, int flags)
>>  		phys_addr_t  addr;
>>  	} cmd;
>>
>> +	might_sleep();
>> +
>
>Unrelated change?
>
>Looking closer at scm_call(), looks like the might_sleep() should go
>inside scm_call() where it uses the mutex.
>
Removed it from this patch.

>>  	cmd.addr = addr;
>>  	cmd.flags = flags;
>>  	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
>>  			&cmd, sizeof(cmd), NULL, 0);
>>  }
>>  EXPORT_SYMBOL(scm_set_boot_addr);
>> +
>> +int scm_set_warm_boot_addr(void *entry, int cpu)
>> +{
>> +	int ret;
>> +
>> +	/*
>> +	 * Reassign only if we are switching from hotplug entry point
>> +	 * to cpuidle entry point or vice versa.
>> +	 */
>> +	if (entry == scm_flags[cpu].entry)
>> +		return 0;
>> +
>> +	ret = scm_set_boot_addr(virt_to_phys(entry), scm_flags[cpu].flag);
>> +	if (!ret)
>> +		scm_flags[cpu].entry  = entry;
>> +
>> +	return ret;
>> +}
>> diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
>> index 02b445c..97dbf58 100644
>> --- a/arch/arm/mach-qcom/scm-boot.h
>> +++ b/arch/arm/mach-qcom/scm-boot.h
>> @@ -1,4 +1,5 @@
>>  /* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
>> + * Copyright (c) 2014, Linaro Ltd.
>>   *
>>   * This program is free software; you can redistribute it and/or modify
>>   * it under the terms of the GNU General Public License version 2 and
>> @@ -9,6 +10,7 @@
>>   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>   * GNU General Public License for more details.
>>   */
>> +
>>  #ifndef __MACH_SCM_BOOT_H
>>  #define __MACH_SCM_BOOT_H
>>
>> @@ -16,11 +18,8 @@
>>  #define SCM_FLAG_COLDBOOT_CPU1		0x01
>>  #define SCM_FLAG_COLDBOOT_CPU2		0x08
>>  #define SCM_FLAG_COLDBOOT_CPU3		0x20
>> -#define SCM_FLAG_WARMBOOT_CPU0		0x04
>> -#define SCM_FLAG_WARMBOOT_CPU1		0x02
>> -#define SCM_FLAG_WARMBOOT_CPU2		0x10
>> -#define SCM_FLAG_WARMBOOT_CPU3		0x40
>
>You just added these in patch 1, and now moved them.  I would just
>squash the 2 patches together.
>
Sure. Thanks!

>Kevin