linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: l.majewski@samsung.com (Lukasz Majewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC
Date: Wed, 04 Mar 2015 11:48:02 +0100	[thread overview]
Message-ID: <20150304114802.33101b6f@amdc2363> (raw)
In-Reply-To: <1424950521-6236-3-git-send-email-cw00.choi@samsung.com>

Hi Chanwoo,

> This patch adds the TMU (Thermal Management Unit) sensor devicetree
> node for Exynos5433. The Exynos5433 includes the five temperature
> sensors as following:
> - two temperature sensor for Cortex-A57 (ATLAS)
> - one temperature sensor for Cortex-A53 (APOLLO)
> - one temperature sensor for G3D IP
> - one temperature sensor for ISP IP
> 
> Cc: Kukjin Kim <kgene@kernel.org>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Acked-by: Inki Dae <inki.dae@samsung.com>
> ---
>  .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     | 22 +++++++++
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 55
> ++++++++++++++++++++++ 2 files changed, 77 insertions(+)
>  create mode 100644
> arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> 
> diff --git
> a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi new file
> mode 100644 index 0000000..396e60f --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> @@ -0,0 +1,22 @@
> +/*
> + * Device tree sources for Exynos5433 TMU sensor configuration
> + *
> + * Copyright (c) 2015 Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <8>;
> +samsung,tmu_reference_voltage = <16>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <40>;
> +samsung,tmu_max_efuse_value = <150>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 0776b6d..b44ddcc
> 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -872,6 +872,61 @@
>  			status = "disabled";
>  		};
>  
> +		tmu_atlas0: tmu at 10060000 {
> +			compatible = "samsung,exynos5433-tmu";
> +			reg = <0x10060000 0x200>;
> +			interrupts = <0 95 0>;
> +			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> +				 <&cmu_peris CLK_SCLK_TMU0>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos5433-tmu-sensor-conf.dtsi"
> +			status = "disabled";
> +		};
> +
> +		tmu_atlas1: tmu at 10068000 {
> +			compatible = "samsung,exynos5433-tmu";
> +			reg = <0x10068000 0x200>;
> +			interrupts = <0 96 0>;
> +			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> +				 <&cmu_peris CLK_SCLK_TMU0>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos5433-tmu-sensor-conf.dtsi"
> +			status = "disabled";
> +		};
> +
> +		tmu_g3d: tmu at 10070000 {
> +			compatible = "samsung,exynos5433-tmu";
> +			reg = <0x10070000 0x200>;
> +			interrupts = <0 99 0>;
> +			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> +				 <&cmu_peris CLK_SCLK_TMU1>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos5433-tmu-sensor-conf.dtsi"
> +			status = "disabled";
> +		};
> +
> +		tmu_apollo: tmu at 10078000 {
> +			compatible = "samsung,exynos5433-tmu";
> +			reg = <0x10078000 0x200>;
> +			interrupts = <0 115 0>;
> +			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> +				 <&cmu_peris CLK_SCLK_TMU1>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos5433-tmu-sensor-conf.dtsi"
> +			status = "disabled";
> +		};
> +
> +		tmu_isp: tmu at 1007c000 {
> +			compatible = "samsung,exynos5433-tmu";
> +			reg = <0x1007c000 0x200>;
> +			interrupts = <0 94 0>;
> +			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> +				 <&cmu_peris CLK_SCLK_TMU1>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos5433-tmu-sensor-conf.dtsi"
> +			status = "disabled";
> +		};
> +
>  		pmu_system_controller: system-controller at 105c0000 {
>  			compatible = "samsung,exynos5433-pmu",
> "syscon"; reg = <0x105c0000 0x5008>;

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

  reply	other threads:[~2015-03-04 10:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 11:35 [PATCH 0/3] thermal: exynos: Add support for Exynos5433 TMU Chanwoo Choi
2015-02-26 11:35 ` [PATCH 1/3] thermal: exynos: Add the " Chanwoo Choi
2015-03-04 10:38   ` Lukasz Majewski
2015-03-05  5:44     ` Chanwoo Choi
2015-02-26 11:35 ` [PATCH 2/3] arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC Chanwoo Choi
2015-03-04 10:48   ` Lukasz Majewski [this message]
2015-02-26 11:35 ` [PATCH 3/3] arm64: dts: exynos: Add thermal-zones " Chanwoo Choi
2015-03-04 10:53   ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150304114802.33101b6f@amdc2363 \
    --to=l.majewski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).