From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 16 Mar 2015 20:45:08 +0100 Subject: [PATCH] ARM: sunxi: DT: Add stdout-path property In-Reply-To: <55068E7C.4060400@redhat.com> References: <1426448851-32204-1-git-send-email-maxime.ripard@free-electrons.com> <55068E7C.4060400@redhat.com> Message-ID: <20150316194508.GB4638@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Mar 16, 2015 at 09:04:12AM +0100, Hans de Goede wrote: > Hi, > > On 15-03-15 20:47, Maxime Ripard wrote: > >Add UART aliases and stdout-path property for all the Allwinner boards so that > >we won't have to rely on the bootargs' console= value, while working with > >legacy bootloaders. > > > >While we're at it, also remove the mentions of earlyprintk in the bootargs, > >that will remove our default bootargs entirely, and allow the kernel to boot on > >a system even if DEBUG_LL is configured for another system. > > > >Signed-off-by: Maxime Ripard > > Erm, AFAIK stdout-path does not support aliases so you must put full paths > in there, see: > > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=f3133962f469a8b6b9ba237ba670f0ca7c88a02e This was tested on an A31 Hummingbird, and it works just fine, so I guess it also works with aliases ;) Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: