[PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy

[tony@atomide.com (Tony Lindgren)]

* Grygorii.Strashko at linaro.org <grygorii.strashko@linaro.org> [150318 12:36]:
> On 03/18/2015 06:57 PM, Tony Lindgren wrote:
> > * Grygorii Strashko <grygorii.strashko@ti.com> [150318 09:37]:
> >> As I can see Patch 1 from this series was merged in 4.0-rc4,
> >> but this patch wasn't. As result, I can see below warning all the time during boot now:
> >>
> >> [    0.594591] platform 4a094000.pciephy: Cannot lookup hwmod 'pcie1-phy'
> >   
> > OK. Is this needed as a fix for the v4.0-rc series, or can this wait
> > for v4.1?
> 
> I think, Yes. These two patches should go all together, because they are
> interrelated.

OK applying into omap-for-v4.0/fixes thanks.

Tony
 
> >> On 02/20/2015 10:51 AM, Kishon Vijay Abraham I wrote:
> >>> Now that we don't have hwmod entry for pcie PHY remove the
> >>> ti,hwmod property from PCIE PHY's
> >>>
> >>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >>> ---
> >>>    arch/arm/boot/dts/dra7.dtsi |    2 --
> >>>    1 file changed, 2 deletions(-)
> >>>
> >>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> >>> index 5827fed..18a904d 100644
> >>> --- a/arch/arm/boot/dts/dra7.dtsi
> >>> +++ b/arch/arm/boot/dts/dra7.dtsi
> >>> @@ -1111,7 +1111,6 @@
> >>>    					      "wkupclk", "refclk",
> >>>    					      "div-clk", "phy-div";
> >>>    				#phy-cells = <0>;
> >>> -				ti,hwmods = "pcie1-phy";
> >>>    			};
> >>>    
> >>>    			pcie2_phy: pciephy at 4a095000 {
> >>> @@ -1130,7 +1129,6 @@
> >>>    					      "wkupclk", "refclk",
> >>>    					      "div-clk", "phy-div";
> >>>    				#phy-cells = <0>;
> >>> -				ti,hwmods = "pcie2-phy";
> >>>    				status = "disabled";
> >>>    			};
> >>>    		};
> >>>
> >>
> 
> 
> -- 
> regards,
> -grygorii