[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[tony@atomide.com (Tony Lindgren)]

* Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -167,36 +167,65 @@
> +		scm: scm at 4a002000 {
> +			compatible = "ti,omap4-ctrl", "simple-bus";
> +			reg = <0x4a002000 0x1000>,
> +			      <0x4a100000 0x1000>;
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			ranges = <0 0 0x4a002000 0x1000>,
> +				 <1 0 0x4a100000 0x1000>;

Oops I still have a bit of an issue with this, sorry I should have
been more clear last time.

Now it's hard to figure out which children belong to l4_cfg and which
ones to l4_wkup. I suggest we set them up as completely separate blocks
as that's what they are.

Below is an example of what I think things should look like for omap4,
maybe take a look at that and see if that makes sense for you?

It may need to be patched in separate parts to keep the patches readable
though :)

Regards,

Tony


	ocp {
		...

		l4_cfg: l4 at 4a000000 {
			compatible = "ti,omap4-l4-cfg", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a000000 0x1000000>;

			cm1: cm1 at 4000 {
				compatible = "ti,omap4-cm1";
				reg = <0x4000 0x2000>;

				cm1_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm1_clockdomains: clockdomains {
				};
			};

			cm2: cm2 at 8000 {
				compatible = "ti,omap4-cm2";
				reg = <0x8000 0x3000>;

				cm2_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm2_clockdomains: clockdomains {
				};
			};

			omap4_pmx_core: pinmux at 100040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x100040 0x0196>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};

			omap4_padconf_global: tisyscon at 1005a0 {
				compatible = "syscon";
				reg = <0x1005a0 0x170>;
				#address-cells = <1>;
				#size-cells = <1>;

				pbias_regulator: pbias_regulator {
					compatible = "ti,pbias-omap";
					reg = <0x60 0x4>;
					syscon = <&omap4_padconf_global>;
					pbias_mmc_reg: pbias_mmc_omap4 {
						regulator-name = "pbias_mmc_omap4";
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <3000000>;
					};
				};
			};
		};

		l4_wkup: l4 at 4a300000 {
			compatible = "ti,omap4-l4-wkup", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a300000 0x40000>;

			counter32k: counter at 4000 {
				compatible = "ti,omap-counter32k";
				reg = <0x4000 0x20>;
				ti,hwmods = "counter_32k";
			};

			prm: prm at 6000 {
				compatible = "ti,omap4-prm";
				reg = <0x6000 0x3000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

				prm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				prm_clockdomains: clockdomains {
				};
			};

			scrm: scrm at a000 {
				compatible = "ti,omap4-scrm";
				reg = <0xa000 0x2000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0xa000 0x2000>;

				scrm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				scrm_clockdomains: clockdomains {
				};
			};

			omap4_pmx_wkup: pinmux at 1e040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x1e040 0x0038>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};
		};
		...
	};