linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
Date: Mon, 23 Mar 2015 08:39:05 +0100	[thread overview]
Message-ID: <20150323073905.GF9742@pengutronix.de> (raw)
In-Reply-To: <1426917922-61356-4-git-send-email-eddie.huang@mediatek.com>

On Sat, Mar 21, 2015 at 02:05:22PM +0800, Eddie Huang wrote:
> Add mediatek MT8173 I2C controller driver. Compare to I2C controller
> of earlier mediatek SoC, MT8173 fix write-then-read limitation, and
> also increase message size to 64kb.
> 

[...]

> +static const struct i2c_adapter_quirks mt8173_i2c_quirks = {
> +	.max_num_msgs = MAX_MSG_NUM_MT8173,
> +	.max_write_len = MAX_DMA_TRANS_SIZE_MT8173,
> +	.max_read_len = MAX_DMA_TRANS_SIZE_MT8173,
> +	.max_comb_1st_msg_len = MAX_DMA_TRANS_SIZE_MT8173,
> +	.max_comb_2nd_msg_len = MAX_WRRD_TRANS_SIZE_MT8173,
> +};
> +
>  static int mtk_i2c_probe(struct platform_device *pdev)
>  {
>  	int ret = 0;
> @@ -587,7 +626,8 @@ static int mtk_i2c_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  
>  	i2c->platform_compat = mtk_get_device_prop(pdev);
> -	if (i2c->have_pmic && (i2c->platform_compat & COMPAT_MT6577))
> +	if (i2c->have_pmic && (i2c->platform_compat &
> +			(COMPAT_MT6577 | COMPAT_MT8173)))
>  		return -EINVAL;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -613,7 +653,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
>  	i2c->adap.dev.parent = &pdev->dev;
>  	i2c->adap.owner = THIS_MODULE;
>  	i2c->adap.algo = &mtk_i2c_algorithm;
> -	i2c->adap.quirks = &mt6577_i2c_quirks;
> +	if (i2c->platform_compat & COMPAT_MT8173)
> +		i2c->adap.quirks = &mt8173_i2c_quirks;
> +	else
> +		i2c->adap.quirks = &mt6577_i2c_quirks;

Instead of putting an integer into struct of_device_id you should
introduce a

struct mtk_i2c_data {
	struct i2c_adapter_quirks quirks;
	int compat;
	/* Additional SoC specific data */
};

and put a pointer to this directly into the of_device_id. This way you
need less casting and can put newly discovered differences diretly into
some data struct and don't have to introduce if(socxy) ... else ...
everytime.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2015-03-23  7:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-21  6:05 [PATCH v5 0/3] ARM: mediatek: Add driver for Mediatek I2C controller Eddie Huang
2015-03-21  6:05 ` [PATCH v5 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx Eddie Huang
2015-03-23  8:45   ` Sascha Hauer
2015-03-21  6:05 ` [PATCH v5 2/3] I2C: mediatek: Add driver for MediaTek I2C controller Eddie Huang
2015-03-23  8:42   ` Sascha Hauer
2015-03-30  8:14     ` Eddie Huang
2015-03-30 17:23       ` Sascha Hauer
2015-03-31  7:08         ` Eddie Huang
2015-03-31 11:50           ` Eddie Huang
2015-03-31 17:52             ` Sascha Hauer
2015-04-01  2:11               ` Eddie Huang
2015-03-21  6:05 ` [PATCH v5 3/3] I2C: mediatek: Add driver for MediaTek MT8173 " Eddie Huang
2015-03-23  7:39   ` Sascha Hauer [this message]
2015-03-30  8:05     ` Eddie Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150323073905.GF9742@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).