[PATCH v5 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.

[s.hauer@pengutronix.de (Sascha Hauer)]

On Sat, Mar 21, 2015 at 02:05:20PM +0800, Eddie Huang wrote:
> From: Xudong Chen <xudong.chen@mediatek.com>
> 
> Add devicetree bindings for Mediatek Soc I2C driver.
> 
> Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
> ---
>  .../devicetree/bindings/i2c/i2c-mt6577.txt         | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> new file mode 100644
> index 0000000..eff52c1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> @@ -0,0 +1,41 @@
> +* Mediatek's I2C controller
> +
> +The Mediatek's I2C controller is used to interface with I2C devices.
> +
> +Required properties:
> +  - compatible: value should be either of the following.
> +      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
> +      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
> +      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
> +      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
> +      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
> +  - reg: physical base address of the controller and dma base, length of memory
> +    mapped region.
> +  - interrupts: interrupt number to the cpu.
> +  - clock-div: the fixed value for frequency divider of clock source in i2c
> +    module. Each IC may be different.
> +  - clocks: clock name from clock manager
> +  - clock-names: Must include "main" and "dma", if enable have-pmic need include
> +    "pmic" extra.
> +
> +Optional properties:
> +  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
> +    is 100000.
> +  - mediatek,have-pmic: platform can control i2c form special pmic side.
> +    Only mt6589 and mt8135 support this feature.
> +  - mediatek,use-push-pull: IO config use push-pull mode.
> +
> +Example:
> +
> +	i2c0: i2c at 1100d000 {
> +			compatible = "mediatek,mt6577-i2c";
> +			reg = <0x1100d000 0x70>,
> +			      <0x11000300 0x80>;
> +			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
> +			clock-frequency = <100000>;

Since 100000 is the default you should probably pick another speed for
this example or drop the property.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |