From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: sun7i: Add Goodix GT911 nodes for Wexler TAB7200
Date: Tue, 31 Mar 2015 07:43:38 -0700 [thread overview]
Message-ID: <20150331144338.GG23664@lukather> (raw)
In-Reply-To: <1427789897-4085-1-git-send-email-mamlinav@gmail.com>
Hi,
On Tue, Mar 31, 2015 at 11:18:17AM +0300, Aleksei Mamlin wrote:
> This patch adds nodes for the Goodix GT911 touchscreen controller found
> on the Wexler TAB7200 tablet. Controller uses one of following I2C
> addresses: 0x5d or 0x14, so just add two nodes.
In which case are these different addresses encountered? Different
revisions of the same board?
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
> ---
> DT support for the Goodix GT911 touchscreen controller has been queued up
> by Dmitry Torokhov for merging into 4.1:
> https://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/commit/?h=next&id=771d8f1b178e7e09fcc641fccd48852958dbc329
>
> IRQ flags are set by the touchscreen controller driver, so use IRQ_TYPE_NONE.
>
> arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> index 2ad3b09..34e2bce 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> @@ -101,6 +101,20 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c2_pins_a>;
> status = "okay";
> +
> + gt911 at 5d {
The node name should be the class of the device. touchscreen in this
case.
> + compatible = "goodix,gt911";
> + reg = <0x5d>;
> + interrupt-parent = <&pio>;
> + interrupts = <21 IRQ_TYPE_NONE>; /* EINT21 (PH21) */
Unfortunately, IRQ_TYPE_NONE is not a valid value for the GIC
bindings.
You're also not adding a pinctrl group for that pin?
> + };
> +
> + gt911 at 14 {
> + compatible = "goodix,gt911";
> + reg = <0x14>;
> + interrupt-parent = <&pio>;
> + interrupts = <21 IRQ_TYPE_NONE>; /* EINT21 (PH21) */
> + };
And nodes should be ordered by addresses ascending order.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150331/a6c2adac/attachment.sig>
next prev parent reply other threads:[~2015-03-31 14:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 8:18 [PATCH] ARM: dts: sun7i: Add Goodix GT911 nodes for Wexler TAB7200 Aleksei Mamlin
2015-03-31 14:43 ` Maxime Ripard [this message]
2015-03-31 19:14 ` Aleksei Mamlin
2015-04-02 9:22 ` Maxime Ripard
2015-04-11 16:18 ` Aleksei Mamlin
2015-04-13 16:09 ` Maxime Ripard
2015-04-13 19:01 ` Aleksei Mamlin
2015-04-14 16:32 ` Maxime Ripard
2015-03-31 19:31 ` Aleksei Mamlin
2015-04-02 18:50 ` Maxime Ripard
2015-04-11 16:36 ` Aleksei Mamlin
2015-04-13 15:59 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150331144338.GG23664@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox