[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[Kukjin Kim]

The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

  Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64

for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:

  arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)

----------------------------------------------------------------
Samsung arm64 DT updates for v4.1

- add new SoC for arm64 based exynos5433 SoC
  : exynos5433 - Octa cores for big.LITTLE architecture
  (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)

  : added thermal-zones, TMU sensor and I2S dt nodes
  : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
  : added pinctrl, HS-I2C, Serial and basic system dt nodes

----------------------------------------------------------------
Chanwoo Choi (6):
      arm64: dts: Add dts files for 64-bit Exynos5433 SoC
      arm64: dts: Add SPI/PDMA dt node for exynos5433
      arm64: dts: Add PMU dt node for exynos5433
      arm64: dts: Add RTC and ADC dt node for exynos5433
      arm64: dts: Add TMU sensor dt node for exynos5433
      arm64: dts: Add thermal-zones dt node for exynos5433

Inha Song (2):
      arm64: dts: Add ADMA dt node for exynos5433
      arm64: dts: Add I2S dt node for exynos5433

Jaehoon Chung (1):
      arm64: dts: Add MSHC dt node for exynos5433

 .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
+++++++++++++++++++++
 5 files changed, 1883 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[Olof Johansson]

On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
> 
>   Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-64
> 
> for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
> 
>   arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> 02:13:43 +0900)
> 
> ----------------------------------------------------------------
> Samsung arm64 DT updates for v4.1
> 
> - add new SoC for arm64 based exynos5433 SoC
>   : exynos5433 - Octa cores for big.LITTLE architecture
>   (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
> 
>   : added thermal-zones, TMU sensor and I2S dt nodes
>   : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
>   : added pinctrl, HS-I2C, Serial and basic system dt nodes
> 
> ----------------------------------------------------------------
> Chanwoo Choi (6):
>       arm64: dts: Add dts files for 64-bit Exynos5433 SoC
>       arm64: dts: Add SPI/PDMA dt node for exynos5433
>       arm64: dts: Add PMU dt node for exynos5433
>       arm64: dts: Add RTC and ADC dt node for exynos5433
>       arm64: dts: Add TMU sensor dt node for exynos5433
>       arm64: dts: Add thermal-zones dt node for exynos5433
> 
> Inha Song (2):
>       arm64: dts: Add ADMA dt node for exynos5433
>       arm64: dts: Add I2S dt node for exynos5433
> 
> Jaehoon Chung (1):
>       arm64: dts: Add MSHC dt node for exynos5433
> 
>  .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
>  arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
>  .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
>  arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
> +++++++++++++++++++++
>  5 files changed, 1883 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
>  create mode 100644
> arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

How do you even build these dts files? How did you test this branch before you
sent it to us?

Not merged.


-Olof

[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[Kukjin Kim]

Olof Johansson wrote:
> 
> On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> > The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
> >
> >   Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
> >
> > are available in the git repository at:
> >
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > tags/samsung-dt-64
> >
> > for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
> >
> >   arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> > 02:13:43 +0900)
> >
> > ----------------------------------------------------------------
> > Samsung arm64 DT updates for v4.1
> >
> > - add new SoC for arm64 based exynos5433 SoC
> >   : exynos5433 - Octa cores for big.LITTLE architecture
> >   (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
> >
> >   : added thermal-zones, TMU sensor and I2S dt nodes
> >   : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> >   : added pinctrl, HS-I2C, Serial and basic system dt nodes
> >
> > ----------------------------------------------------------------
> > Chanwoo Choi (6):
> >       arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> >       arm64: dts: Add SPI/PDMA dt node for exynos5433
> >       arm64: dts: Add PMU dt node for exynos5433
> >       arm64: dts: Add RTC and ADC dt node for exynos5433
> >       arm64: dts: Add TMU sensor dt node for exynos5433
> >       arm64: dts: Add thermal-zones dt node for exynos5433
> >
> > Inha Song (2):
> >       arm64: dts: Add ADMA dt node for exynos5433
> >       arm64: dts: Add I2S dt node for exynos5433
> >
> > Jaehoon Chung (1):
> >       arm64: dts: Add MSHC dt node for exynos5433
> >
> >  .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
> >  arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> >  .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
> >  arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
> >  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
> > +++++++++++++++++++++
> >  5 files changed, 1883 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> >  create mode 100644
> > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
> 
+ Chanwoo, Mike

Hi Olof,

Thanks for your taking other pull-requests :-)

> How do you even build these dts files? How did you test this branch before
> you sent it to us?
> 
Yeah, your pointing out is exact. In my side, I've tested with 1) creating
exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
Sorry for missing the explaining in my pull-request.

For 1), I've talked to Chanwoo about that and he is not ready to post its
board dt now and I want actual board dt for mass product would be better
in mainline. Maybe need some time...

For 2), we can add regarding updates for exynos-64 Kconfig/Makefile including
Arnd's suggestion to collapse all exynos-64 config entries in arm64/Kconfig
_later_, because current the exynos5433 dt has a dependency with 1) and clk
tree to support exynos5433 SoC.

For 3), same as For 2). Additionally as you know tipically arm-soc and clk
trees could have dependencies when new SoC supporting is added.

> Not merged.
> 
Yeah, I agreed why you didn't. In this case, how do you think about adding
support new SoC then adding board dt including above changes later?

Thanks,
Kukjin

[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[Chanwoo Choi]

Hi Kukjin,

On Wed, May 13, 2015 at 3:39 AM, Kukjin Kim <kgene@kernel.org> wrote:
>> Olof Johansson wrote:
>> >
>> > On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
>> > > The following changes since commit
> c517d838eb7d07bbe9507871fab3931deccff539:
>> > >
>> > >   Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
>> > >
>> > > are available in the git repository at:
>> > >
>> > >
>> > > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>> > > tags/samsung-dt-64
>> > >
>> > > for you to fetch changes up to
> 423c716151e254e42650ad78b30c2cd782c6f654:
>> > >
>> > >   arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
>> > > 02:13:43 +0900)
>> > >
>> > > ----------------------------------------------------------------
>> > > Samsung arm64 DT updates for v4.1
>> > >
>> > > - add new SoC for arm64 based exynos5433 SoC
>> > >   : exynos5433 - Octa cores for big.LITTLE architecture
>> > >   (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
>> > >
>> > >   : added thermal-zones, TMU sensor and I2S dt nodes
>> > >   : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
>> > >   : added pinctrl, HS-I2C, Serial and basic system dt nodes
>> > >
>> > > ----------------------------------------------------------------
>> > > Chanwoo Choi (6):
>> > >       arm64: dts: Add dts files for 64-bit Exynos5433 SoC
>> > >       arm64: dts: Add SPI/PDMA dt node for exynos5433
>> > >       arm64: dts: Add PMU dt node for exynos5433
>> > >       arm64: dts: Add RTC and ADC dt node for exynos5433
>> > >       arm64: dts: Add TMU sensor dt node for exynos5433
>> > >       arm64: dts: Add thermal-zones dt node for exynos5433
>> > >
>> > > Inha Song (2):
>> > >       arm64: dts: Add ADMA dt node for exynos5433
>> > >       arm64: dts: Add I2S dt node for exynos5433
>> > >
>> > > Jaehoon Chung (1):
>> > >       arm64: dts: Add MSHC dt node for exynos5433
>> > >
>> > >  .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
>> > >  arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698
> +++++++++++++++
>> > >  .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
>> > >  arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
>> > >  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
>> > > +++++++++++++++++++++
>> > >  5 files changed, 1883 insertions(+)
>> > >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
>> > >  create mode 100644
>> > > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
>> > >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> > >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> >
>> + Chanwoo, Mike
>>
>> Hi Olof,
>>
>> Thanks for your taking other pull-requests :-)
>>
>> > How do you even build these dts files? How did you test this branch
> before
>> > you sent it to us?
>> >
>> Yeah, your pointing out is exact. In my side, I've tested with 1) creating
>> exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
>> arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
>> Sorry for missing the explaining in my pull-request.
>>
>> For 1), I've talked to Chanwoo about that and he is not ready to post its
>> board dt now and I want actual board dt for mass product would be better
>> in mainline. Maybe need some time...
>>
>> For 2), we can add regarding updates for exynos-64 Kconfig/Makefile
> including
>> Arnd's suggestion to collapse all exynos-64 config entries in
> arm64/Kconfig
>> _later_, because current the exynos5433 dt has a dependency with 1)
> and clk
>> tree to support exynos5433 SoC.
>>
>> For 3), same as For 2). Additionally as you know tipically arm-soc and clk
>> trees could have dependencies when new SoC supporting is added.
>>
>> > Not merged.
>> >
>> Yeah, I agreed why you didn't. In this case, how do you think about adding
>> support new SoC then adding board dt including above changes later?
>>
>> Thanks,
>> Kukjin
>
> Hi Chanwoo,
>
> As you know, the arm64-exynos5433 couldn't be sent to upstream during
> previous merge window because it cannot be built without other stuff
> such as board DT file. I think, you need to post its regarding board DT
> file, I could test the exynos5433 series in my side with smdk5433 dt
> file though. Maybe as you know, I have no plan to upstream the smdk5433
> DT file because it will not be used outside of Samsung S.LSI.

Thanks for your test about Exynos5433 patch-set.
But, I cannot send the DTS file for Exynos5433 right now.
On the next, I'll send the Exynos5433's patchset and board dts file.

Best Regards,
Chanwoo Choi

[GIT PULL 4/5] Samsung arm64 DT updates for v4.1

[Kukjin Kim]

On 05/14/15 22:56, Chanwoo Choi wrote:
> Hi Kukjin,

[...]

>> As you know, the arm64-exynos5433 couldn't be sent to upstream during
>> previous merge window because it cannot be built without other stuff
>> such as board DT file. I think, you need to post its regarding board DT
>> file, I could test the exynos5433 series in my side with smdk5433 dt
>> file though. Maybe as you know, I have no plan to upstream the smdk5433
>> DT file because it will not be used outside of Samsung S.LSI.
> 
> Thanks for your test about Exynos5433 patch-set.
> But, I cannot send the DTS file for Exynos5433 right now.
> On the next, I'll send the Exynos5433's patchset and board dts file.
> 
OK, I see. I think, maybe you can make a patch for board DT file based
on v4.2-next/dt64-samsung branch in samsung tree.

Thanks,
Kukjin