From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Tue, 7 Apr 2015 21:45:01 +0200 Subject: [PATCH] ARM: at91/dt: add support for kizbox2. In-Reply-To: <1428416031-30765-2-git-send-email-g.portay@overkiz.com> References: <1428416031-30765-1-git-send-email-g.portay@overkiz.com> <1428416031-30765-2-git-send-email-g.portay@overkiz.com> Message-ID: <20150407214501.3189230a@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 7 Apr 2015 16:13:51 +0200 Ga?l PORTAY wrote: > Add DT file for Kizbox 2 board. > This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. > > Signed-off-by: Ga?l PORTAY > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizbox2.dts | 223 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 224 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizbox2.dts > [...] > +/dts-v1/; > +#include "sama5d31.dtsi" > +#include "sama5d3_emac.dtsi" > +#include > + > +/ { > + model = "Overkiz Kizbox 2"; > + compatible = "overkiz,kizbox2", "atmel,sama5d31ek", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; Oh, and as Alexandre noticed in your other patch series, you should just define: compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com