ARM errata 430973 on multi platform kernels

[tony@atomide.com (Tony Lindgren)]

* Grazvydas Ignotas <notasas@gmail.com> [150409 15:37]:
> On Tue, Apr 7, 2015 at 5:23 AM, Tony Lindgren <tony@atomide.com> wrote:
> > * Matthijs van Duin <matthijsvanduin@gmail.com> [150406 11:15]:
> >>
> >> On 6 April 2015 at 19:42, Tony Lindgren <tony@atomide.com> wrote:
> >> > Hmm but it still seems to do something also on cortex-a8 r3p2 that
> >> > is supposedly not affected by 430973.. Based on my tests so far, at least
> >> > armhf running cpuburn-a8 in the background and doing apt-get update
> >> > segfaults constantly without flush BTAC/BTB. This seems to be the case
> >> > no matter how the aux ctrl reg bits are set..
> >>
> >> That sounds.... really odd.  The TRM is fairly explicit about BTB
> >> flush executing as nop when IBE is not set. Of course the TRM is not
> >> exactly flawless, but still...
> >
> > Oops, sorry user error.. I was trying to clear IBE as a banked register
> > like L2 enable bit and of course it did not get cleared.. Clearing it
> > with a smc call really clears it. And in that case my test case seems to
> > work reliably on r3p2 without erratum 430973 enabled.
> 
> May I ask how do you perform the smc call? I wanted to clear IBE too
> to experiment, but it just hangs my board, even if I just write back
> the same value. Here is what I do:
> 
>         asm ("mrc p15, 0, %0, c1, c0, 1" : "=r"(val));
> 
>         asm (".arch_extension sec\n\t"
>              "mov r0,  %0\n"
>              "mov r12, #3\n"
>              "smc #0\n"
>              :: "r"(val) : "r0", "r12");
> 
> I just run this from a sysfs write handler, does it need to be run on
> SRAM or something?

Best done in the bootloader.. I just hacked it into the restore from
off-idle to test, see below. But for that you naturally need to have
a device with working idle and it's usable for just testing for lazy
people.

Regards,

Tony

--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -516,6 +516,7 @@ l2_inv_gp:
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#4]
+	bic	r0, r1, #(1 << 6)
 	mov	r12, #0x3
 	smc	#0			@ Call SMI monitor (smieq)
 	ldr	r4, scratchpad_base