[PATCH 1/3] clk: meson: Add support for Meson clock controller

[mturquette@linaro.org (Michael Turquette)]

Quoting Carlo Caione (2015-03-02 08:22:00)
> +static int meson_clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
> +                                 unsigned long parent_rate)
> +{
> +       struct meson_clk_cpu *clk_cpu = to_meson_clk_cpu_hw(hw);
> +       unsigned int div, sel, N = 0;
> +       u32 reg;
> +
> +       div = DIV_ROUND_UP(parent_rate, rate);
> +
> +       if (div <= 3) {
> +               sel = div - 1;
> +       } else {
> +               sel = 3;
> +               N = div / 2;
> +       }
> +
> +       reg = readl(clk_cpu->base + clk_cpu->reg_off + MESON_CPU_CLK_CNTL1);
> +       reg = PARM_SET(MESON_N_WIDTH, MESON_N_SHIFT, reg, N);
> +       writel(reg, clk_cpu->base + clk_cpu->reg_off + MESON_CPU_CLK_CNTL1);
> +
> +       reg = readl(clk_cpu->base + clk_cpu->reg_off + MESON_CPU_CLK_CNTL);
> +       reg = PARM_SET(MESON_SEL_WIDTH, MESON_SEL_SHIFT, reg, sel);
> +       writel(reg, clk_cpu->base + clk_cpu->reg_off + MESON_CPU_CLK_CNTL);
> +
> +       return 0;
> +}

<snip>

> +static int meson_clk_cpu_pre_rate_change(struct meson_clk_cpu *clk_cpu,
> +                                        struct clk_notifier_data *ndata)
> +{
> +       u32 cpu_clk_cntl;
> +
> +       spin_lock(clk_cpu->lock);
> +
> +       /* switch MUX1 to xtal */
> +       cpu_clk_cntl = readl(clk_cpu->base + clk_cpu->reg_off
> +                               + MESON_CPU_CLK_CNTL);
> +       cpu_clk_cntl &= ~MESON_CPU_CLK_MUX1;
> +       writel(cpu_clk_cntl, clk_cpu->base + clk_cpu->reg_off
> +                               + MESON_CPU_CLK_CNTL);
> +       udelay(100);
> +
> +       /* switch MUX2 to sys-pll */
> +       cpu_clk_cntl |= MESON_CPU_CLK_MUX2;
> +       writel(cpu_clk_cntl, clk_cpu->base + clk_cpu->reg_off
> +                               + MESON_CPU_CLK_CNTL);
> +
> +       spin_unlock(clk_cpu->lock);
> +
> +       return 0;
> +}
> +
> +static int meson_clk_cpu_post_rate_change(struct meson_clk_cpu *clk_cpu,
> +                                         struct clk_notifier_data *ndata)
> +{
> +       u32 cpu_clk_cntl;
> +
> +       spin_lock(clk_cpu->lock);
> +
> +       /* switch MUX1 to divisors' output */
> +       cpu_clk_cntl = readl(clk_cpu->base + clk_cpu->reg_off
> +                               + MESON_CPU_CLK_CNTL);
> +       cpu_clk_cntl |= MESON_CPU_CLK_MUX1;
> +       writel(cpu_clk_cntl, clk_cpu->base + clk_cpu->reg_off
> +                               + MESON_CPU_CLK_CNTL);
> +       udelay(100);
> +
> +       spin_unlock(clk_cpu->lock);
> +
> +       return 0;
> +}
> +
> +/*
> + * This clock notifier is called when the frequency of the of the parent
> + * PLL clock is to be changed. We use the xtal input as temporary parent
> + * while the PLL frequency is stabilized.
> + */
> +static int meson_clk_cpu_notifier_cb(struct notifier_block *nb,
> +                                    unsigned long event, void *data)
> +{
> +       struct clk_notifier_data *ndata = data;
> +       struct meson_clk_cpu *clk_cpu = to_meson_clk_cpu_nb(nb);
> +       int ret = 0;
> +
> +       if (event == PRE_RATE_CHANGE)
> +               ret = meson_clk_cpu_pre_rate_change(clk_cpu, ndata);
> +       else if (event == POST_RATE_CHANGE)
> +               ret = meson_clk_cpu_post_rate_change(clk_cpu, ndata);
> +
> +       return notifier_from_errno(ret);
> +}

Why use a notifier for this? Could you simply call
meson_clk_cpu_{pre,post}_rate_change directly from
meson_clk_cpu_set_rate?

Regards,
Mike