From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Thu, 16 Apr 2015 11:12:16 +0200 Subject: [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini In-Reply-To: <1428929774-8951-1-git-send-email-g.portay@overkiz.com> References: <1428929774-8951-1-git-send-email-g.portay@overkiz.com> Message-ID: <20150416111216.1c8f19cc@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, 13 Apr 2015 14:56:12 +0200 Ga?l PORTAY wrote: > Hi, > > Here are two patches to bring support for a new hardware based on SAM9G25 SoC. > > The first one adds the PIN controller definition for PWM0. > The second defines the new board. To the whole series, Acked-by: Boris Brezillon > > Changes since v1: > - drop useless comments > - move pwm0 pinctrl's node close to tcb0 > - drop ek boards from compatible machine > - add at91sam9g25 board to compatible machine > > Changes since v2: > - update to v4.0 > - fix alphabetical order between gpio_keys and pwm_leds > > Best regards, > Ga?l PORTAY (2): > ARM: at91/dt: sam9x5: add pinctrl for pwm0 > ARM: at91/dt: add support for kizboxmini > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++ > 3 files changed, 176 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com