[PATCH v5 05/11] ARM: dts: add imx7d soc dtsi file

[mark.rutland@arm.com (Mark Rutland)]

On Tue, Apr 21, 2015 at 08:34:45PM +0100, Zhi Li wrote:
> >>> +
> >>> +       clocks {
> >>> +               #address-cells = <1>;
> >>> +               #size-cells = <0>;
> >>> +
> >>> +               ckil: clock at 0 {
> >>> +                       compatible = "fixed-clock";
> >>> +                       reg = <0>;
> >>> +                       #clock-cells = <0>;
> >>> +                       clock-frequency = <32768>;
> >>> +                       clock-output-names = "ckil";
> >>> +               };
> >>> +
> >>> +               osc: clock at 1 {
> >>> +                       compatible = "fixed-clock";
> >>> +                       reg = <1>;
> >>> +                       #clock-cells = <0>;
> >>> +                       clock-frequency = <24000000>;
> >>> +                       clock-output-names = "osc";
> >>> +               };
> >>> +
> >>> +       };
> >>
> >> Get rid of the clocks container node, and put these under the root.
> >
> > Okay.
> 
> After remove clocks node.
> There will be warning
> 
> Warning (reg_format): "reg" property in /clock at 0 has invalid length (4
> bytes) (#address-cells == 1, #size-cells == 1)
> Warning (reg_format): "reg" property in /clock at 1 has invalid length (4
> bytes) (#address-cells == 1, #size-cells == 1)

The reg property is meainingless, so just remove it and give the clocks
different names.

Mark.