From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 29 Apr 2015 22:32:00 +0200 Subject: [PATCH] ARM: sunxi: dts: split IR pins for A10 and A20 In-Reply-To: <1430244287-29309-1-git-send-email-codekipper@gmail.com> References: <1430244287-29309-1-git-send-email-codekipper@gmail.com> Message-ID: <20150429203200.GJ6062@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Tue, Apr 28, 2015 at 08:04:47PM +0200, codekipper at gmail.com wrote: > From: Marcus Cooper > > Currently none of the target boards nor the driver supports > IR TX. However this pin is used in a few instances as a GPIO. > Split the pin ctrl descriptions so that only the IR RX is > configured to be used. > > Signed-off-by: Marcus Cooper > --- > arch/arm/boot/dts/sun4i-a10.dtsi | 18 ++++++++++++++++-- > arch/arm/boot/dts/sun7i-a20.dtsi | 18 ++++++++++++++++-- > 2 files changed, 32 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index 1d7fd68..50df9b7 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -798,14 +798,28 @@ > }; > > ir0_pins_a: ir0 at 0 { I would have changed the name of that node to ir0_rx_pins_a, just to make it clear what you're actually muxing. (of course, that would require fixing the users of these nodes, but that's fine.) Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: