linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ
Date: Thu, 7 May 2015 11:20:59 +0200	[thread overview]
Message-ID: <20150507092059.GB25885@cbox> (raw)
In-Reply-To: <554B18C9.7020903@linaro.org>

On Thu, May 07, 2015 at 09:48:25AM +0200, Eric Auger wrote:
> Hi Christoffer,
> 
> On 05/06/2015 04:26 PM, Christoffer Dall wrote:
> > On Wed, Feb 11, 2015 at 09:20:55AM +0100, Eric Auger wrote:
> >> Fix multiple injection of level sensitive forwarded IRQs.
> >> With current code, the second injection fails since the state bitmaps
> >> are not reset (process_maintenance is not called anymore).
> >>
> >> New implementation follows those principles:
> >> - A forwarded IRQ only can be sampled when it is pending
> > 
> > why?
> For forwarded IRQ there is no modeled queued state (same as edge). The
> pending state is reset as soon as the vIRQ gets queued, in
> vgic_queue_hwirq (also same as edge). This modeling makes sure the vIRQ
> is injected once. I did not model the pending state since the above
> modeling looks simple and modeling the queued state did not work
> properly: I observed new forwarded IRQ could hit before the LR was seen
> cleaned. So overall, to me, current model looks closer to edge sensitive
> IRQs and looks simple & reliable compared to attempting to model any
> queued state.
> 

hmm, reading this, I'm remembering that the rationale was that the
pending state is maintained in the hardware so we never need to resample
any software state.  If the interrupt hits again (injected from VFIO for
example) it must have not been pending, otherwise we have a bug.

Is this the right way to look at it?

I think this needs to be documented somewhere in the code.


> > 
> >> - when queueing the IRQ (programming the LR), the pending state is removed
> >>   as for edge sensitive IRQs
> >> - an injection of a forwarded IRQ is considered always valid since
> >>   coming from the HW and level always is 1.
> >>
> >> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> >>
> >> ---
> >>
> >> v1 -> v2:
> >> - integration in new vgic_can_sample_irq
> >> - remove the pending state when programming the LR
> >> ---
> >>  virt/kvm/arm/vgic.c | 16 ++++++++++++----
> >>  1 file changed, 12 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> >> index cd00cf2..433ecba 100644
> >> --- a/virt/kvm/arm/vgic.c
> >> +++ b/virt/kvm/arm/vgic.c
> >> @@ -361,7 +361,10 @@ static void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq)
> >>  
> >>  static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq)
> >>  {
> >> -	return vgic_irq_is_edge(vcpu, irq) || !vgic_irq_is_queued(vcpu, irq);
> >> +	bool is_forwarded =  (vgic_get_phys_irq(vcpu, irq) >= 0);
> > 
> > can you create a wrapper function for is_forwarded?
> yes sure
> > 
> >> +
> >> +	return vgic_irq_is_edge(vcpu, irq) || !vgic_irq_is_queued(vcpu, irq) ||
> >> +		(is_forwarded && vgic_dist_irq_is_pending(vcpu, irq));
> >>  }
> >>  
> >>  static u32 mmio_data_read(struct kvm_exit_mmio *mmio, u32 mask)
> >> @@ -1296,6 +1299,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
> >>  	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> >>  	struct vgic_lr vlr;
> >>  	int lr;
> >> +	bool is_forwarded =  (vgic_get_phys_irq(vcpu, irq) >= 0);
> >>  
> >>  	/* Sanitize the input... */
> >>  	BUG_ON(sgi_source_id & ~7);
> >> @@ -1331,7 +1335,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
> >>  	vlr.irq = irq;
> >>  	vlr.source = sgi_source_id;
> >>  	vlr.state = LR_STATE_PENDING;
> >> -	if (!vgic_irq_is_edge(vcpu, irq))
> >> +	if (!vgic_irq_is_edge(vcpu, irq) && !is_forwarded)
> >>  		vlr.state |= LR_EOI_INT;
> >>  
> >>  	vgic_set_lr(vcpu, lr, vlr);
> >> @@ -1372,11 +1376,12 @@ static bool vgic_queue_sgi(struct kvm_vcpu *vcpu, int irq)
> >>  
> >>  static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq)
> >>  {
> >> +	bool is_forwarded = (vgic_get_phys_irq(vcpu, irq) >= 0);
> >>  	if (!vgic_can_sample_irq(vcpu, irq))
> >>  		return true; /* level interrupt, already queued */
> >>  
> >>  	if (vgic_queue_irq(vcpu, 0, irq)) {
> >> -		if (vgic_irq_is_edge(vcpu, irq)) {
> >> +		if (vgic_irq_is_edge(vcpu, irq) || is_forwarded) {
> >>  			vgic_dist_irq_clear_pending(vcpu, irq);
> >>  			vgic_cpu_irq_clear(vcpu, irq);
> >>  		} else {
> >> @@ -1626,14 +1631,17 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
> >>  	int edge_triggered, level_triggered;
> >>  	int enabled;
> >>  	bool ret = true;
> >> +	bool is_forwarded;
> >>  
> >>  	spin_lock(&dist->lock);
> >>  
> >>  	vcpu = kvm_get_vcpu(kvm, cpuid);
> >> +	is_forwarded = (vgic_get_phys_irq(vcpu, irq_num) >= 0);
> >> +
> >>  	edge_triggered = vgic_irq_is_edge(vcpu, irq_num);
> >>  	level_triggered = !edge_triggered;
> >>  
> >> -	if (!vgic_validate_injection(vcpu, irq_num, level)) {
> >> +	if (!vgic_validate_injection(vcpu, irq_num, level) && !is_forwarded) {
> > 
> > why is it again that we don't trust validate for forwarded irqs?
> forwarded IRQs are directly linked to HW IRQs. If the forwarded IRQ is
> received this means the guest completed last HW IRQ occurence and it is
> valid to inject the new one so following the discussions we had with
> Marc I skipped that check.

right, like I said above.  We need to document this; it's not trivial.

> 
>   Should
> > it not be checked inside validate?  Otherwise, this seems to deserve a
> > comment.
> It is equal to me. Let me know what is your preference according to
> above comment.
> 
I would fold it into validate and clearly comment that function so that
it's clear what it does.

Thanks,
-Christoffer

  reply	other threads:[~2015-05-07  9:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-11  8:20 [RFC v2 0/4] chip/vgic adaptations for forwarded irq Eric Auger
2015-02-11  8:20 ` [RFC v2 1/4] chip.c: complete the forwarded IRQ in case the handler is not reached Eric Auger
2015-02-11  8:20 ` [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ Eric Auger
2015-05-06 14:26   ` Christoffer Dall
2015-05-07  7:48     ` Eric Auger
2015-05-07  9:20       ` Christoffer Dall [this message]
2015-05-07  9:38         ` Eric Auger
2015-02-11  8:20 ` [RFC v2 3/4] KVM: arm: vgic: add forwarded irq rbtree lock Eric Auger
2015-02-11  8:20 ` [RFC v2 4/4] KVM: arm: vgic: cleanup forwarded IRQs on destroy Eric Auger
2015-05-06 14:27 ` [RFC v2 0/4] chip/vgic adaptations for forwarded irq Christoffer Dall
2015-05-06 15:32   ` Eric Auger
2015-05-07  9:17     ` Christoffer Dall
2015-05-07  9:39       ` Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150507092059.GB25885@cbox \
    --to=christoffer.dall@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).