From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Fri, 8 May 2015 07:15:38 +0200 Subject: [PATCH v2 0/4] mtd: mxc_nand: fix 8 bit ECC and large oob In-Reply-To: References: Message-ID: <20150508051538.GW6325@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, May 03, 2015 at 10:18:50AM +0300, Baruch Siach wrote: > This patch series fixes mxc_nand bugs that I encountered while trying to use 8 > bit ECC mode on i.MX25 with the Micron MT29F8G08ABABA flash chip. > > Many thanks to Uwe Kleine-K?nig for guiding me through the process of > debugging and fixing, and for contributing a clean-up patch to this series. > > This series applies and tested on v4.1-rc1. > > This is version 2 of the patch series, addressing the comments and suggestion > of Uwe Kleine-K?nig on the first series > (http://thread.gmane.org/gmane.linux.ports.arm.kernel/408635). See each patch > for detailed per-patch changelog. > > Baruch Siach (3): > mtd: mxc_nand: limit the size of used oob > mtd: mxc_nand: fix truncate of unaligned oob copying > mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC > > Uwe Kleine-K?nig (1): > mtd: nand: mxc_nand: cleanup copy_spare function I looked at this version and have only found some minor coding style violations (spaces missing on both sides of operators). Reviewed-by: Sascha Hauer Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |