From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/12] KVM: arm64: add trace points for guest_debug debug
Date: Fri, 8 May 2015 19:25:03 +0200 [thread overview]
Message-ID: <20150508172503.GM24744@cbox> (raw)
In-Reply-To: <1430989647-22501-5-git-send-email-alex.bennee@linaro.org>
On Thu, May 07, 2015 at 10:07:15AM +0100, Alex Benn?e wrote:
> This includes trace points for:
> kvm_arch_setup_guest_debug
> kvm_arch_clear_guest_debug
> kvm_handle_guest_debug
>
> I've also added some generic register setting trace events and also a
> trace point to dump the array of hardware registers.
>
> Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>
>
> ---
> v3
> - add trace event for debug access.
> - remove short trace #define, rename trace events
> - use __print_array with fixed array instead of own func
> - rationalise trace points (only one per register changed)
> - add vcpu ptr to the debug_setup trace
> - remove :: in prints
>
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index dc8bca8..08e1b83 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -24,6 +24,8 @@
> #include <asm/kvm_arm.h>
> #include <asm/kvm_emulate.h>
>
> +#include "trace.h"
> +
> /* These are the bits of MDSCR_EL1 we may manipulate */
> #define MDSCR_EL1_DEBUG_MASK (DBG_MDSCR_SS | \
> DBG_MDSCR_KDE | \
> @@ -44,6 +46,11 @@ static void save_guest_debug_regs(struct kvm_vcpu *vcpu)
> {
> vcpu->arch.guest_debug_state.pstate = *vcpu_cpsr(vcpu);
> vcpu->arch.guest_debug_state.mdscr_el1 = vcpu_sys_reg(vcpu, MDSCR_EL1);
> +
> + trace_kvm_arm_set_dreg32("Saved PSTATE",
> + vcpu->arch.guest_debug_state.pstate);
> + trace_kvm_arm_set_dreg32("Saved MDSCR_EL1",
> + vcpu->arch.guest_debug_state.mdscr_el1);
wouldn't it make sense to turn these into a single tracepoint with two
parameters?
> }
>
> static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
> @@ -51,6 +58,10 @@ static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
> *vcpu_cpsr(vcpu) |=
> (vcpu->arch.guest_debug_state.pstate & SPSR_DEBUG_MASK);
> vcpu_sys_reg(vcpu, MDSCR_EL1) = vcpu->arch.guest_debug_state.mdscr_el1;
> +
> + trace_kvm_arm_set_dreg32("Restored PSTATE", *vcpu_cpsr(vcpu));
> + trace_kvm_arm_set_dreg32("Restored MDSCR_EL1",
> + vcpu_sys_reg(vcpu, MDSCR_EL1));
ditto
> }
>
> /**
> @@ -92,6 +103,8 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> {
> bool trap_debug = !(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY);
>
> + trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
> +
> vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
> vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
> MDCR_EL2_TPMCR |
> @@ -121,6 +134,8 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> vcpu_sys_reg(vcpu, MDSCR_EL1) &= ~DBG_MDSCR_SS;
> }
>
> + trace_kvm_arm_set_dreg32("SPSR_EL2", *vcpu_cpsr(vcpu));
> +
> /*
> * HW Break/Watch points
> *
> @@ -138,6 +153,14 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
> vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
> trap_debug = true;
> +
> + trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
> + &vcpu->arch.debug_ptr->dbg_bcr[0],
> + &vcpu->arch.debug_ptr->dbg_bvr[0]);
> +
> + trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
> + &vcpu->arch.debug_ptr->dbg_wcr[0],
> + &vcpu->arch.debug_ptr->dbg_wvr[0]);
feels like this should also be a single tracepoint
> }
>
> } else {
> @@ -155,10 +178,15 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
> else
> vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
> +
> + trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
> + trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_sys_reg(vcpu, MDSCR_EL1));
> }
>
> void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
> {
> + trace_kvm_arm_clear_debug(vcpu->guest_debug);
> +
> if (vcpu->guest_debug) {
> restore_guest_debug_regs(vcpu);
>
> @@ -169,6 +197,14 @@ void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
> if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
> vcpu->arch.debug_ptr = (struct kvm_guest_debug_arch *)
> &vcpu_sys_reg(vcpu, DBGBCR0_EL1);
> +
> + trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
> + &vcpu->arch.debug_ptr->dbg_bcr[0],
> + &vcpu->arch.debug_ptr->dbg_bvr[0]);
> +
> + trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
> + &vcpu->arch.debug_ptr->dbg_wcr[0],
> + &vcpu->arch.debug_ptr->dbg_wvr[0]);
ditto
> }
> }
> }
> diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
> index 68a0759..c93b95e 100644
> --- a/arch/arm64/kvm/handle_exit.c
> +++ b/arch/arm64/kvm/handle_exit.c
> @@ -99,6 +99,8 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
> u32 hsr = kvm_vcpu_get_hsr(vcpu);
> int ret = 0;
>
> + trace_kvm_handle_guest_debug(*vcpu_pc(vcpu), hsr);
> +
does this provide anything beyond the generic handle_exit tracepoint?
> run->exit_reason = KVM_EXIT_DEBUG;
> run->debug.arch.hsr = hsr;
>
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 95f422f..ec803ad 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -38,6 +38,8 @@
>
> #include "sys_regs.h"
>
> +#include "trace.h"
> +
> /*
> * All of this file is extremly similar to the ARM coproc.c, but the
> * types are different. My gut feeling is that it should be pretty
> @@ -227,6 +229,9 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
> const struct sys_reg_params *p,
> const struct sys_reg_desc *r)
> {
> + trace_trap_debug_regs(r->reg, p->is_write,
> + p->is_write?*vcpu_reg(vcpu, p->Rt):0);
> +
> if (vcpu->guest_debug && shadow_debug_reg(vcpu, p, r))
> return true;
>
> diff --git a/arch/arm64/kvm/trace.h b/arch/arm64/kvm/trace.h
> index 157416e9..62e6b76 100644
> --- a/arch/arm64/kvm/trace.h
> +++ b/arch/arm64/kvm/trace.h
> @@ -44,6 +44,113 @@ TRACE_EVENT(kvm_hvc_arm64,
> __entry->vcpu_pc, __entry->r0, __entry->imm)
> );
>
> +TRACE_EVENT(kvm_handle_guest_debug,
> + TP_PROTO(unsigned long vcpu_pc, u32 hsr),
> + TP_ARGS(vcpu_pc, hsr),
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, vcpu_pc)
> + __field(u32, hsr)
> + ),
> +
> + TP_fast_assign(
> + __entry->vcpu_pc = vcpu_pc;
> + __entry->hsr = hsr;
> + ),
> +
> + TP_printk("debug exception at 0x%08lx (HSR: 0x%08x)",
> + __entry->vcpu_pc, __entry->hsr)
> +);
> +
> +
> +TRACE_EVENT(kvm_arm_setup_debug,
> + TP_PROTO(struct kvm_vcpu *vcpu, __u32 guest_debug),
> + TP_ARGS(vcpu, guest_debug),
> +
> + TP_STRUCT__entry(
> + __field(struct kvm_vcpu *, vcpu)
> + __field(__u32, guest_debug)
> + ),
> +
> + TP_fast_assign(
> + __entry->vcpu = vcpu;
> + __entry->guest_debug = guest_debug;
> + ),
> +
> + TP_printk("vcpu: %p, flags: 0x%08x", __entry->vcpu, __entry->guest_debug)
> +);
> +
> +TRACE_EVENT(kvm_arm_clear_debug,
> + TP_PROTO(__u32 guest_debug),
> + TP_ARGS(guest_debug),
> +
> + TP_STRUCT__entry(
> + __field(__u32, guest_debug)
> + ),
> +
> + TP_fast_assign(
> + __entry->guest_debug = guest_debug;
> + ),
> +
> + TP_printk("flags: 0x%08x", __entry->guest_debug)
> +);
> +
> +TRACE_EVENT(kvm_arm_set_dreg32,
> + TP_PROTO(const char *name, __u32 value),
> + TP_ARGS(name, value),
> +
> + TP_STRUCT__entry(
> + __field(const char *, name)
> + __field(__u32, value)
> + ),
> +
> + TP_fast_assign(
> + __entry->name = name;
> + __entry->value = value;
> + ),
> +
> + TP_printk("%s: 0x%08x", __entry->name, __entry->value)
> +);
> +
> +TRACE_EVENT(kvm_arm_set_regset,
> + TP_PROTO(const char *type, int len, __u64 *control, __u64 *value),
> + TP_ARGS(type, len, control, value),
> + TP_STRUCT__entry(
> + __field(const char *, name)
> + __field(int, len)
> + __array(u64, ctrls, 16)
> + __array(u64, values, 16)
> + ),
> + TP_fast_assign(
> + __entry->name = type;
> + __entry->len = len;
> + memcpy(__entry->ctrls, control, len << 3);
> + memcpy(__entry->values, value, len << 3);
> + ),
> + TP_printk("%d %s CTRL:%s VALUE:%s", __entry->len, __entry->name,
> + __print_array(__entry->ctrls, __entry->len, sizeof(__u64)),
> + __print_array(__entry->values, __entry->len, sizeof(__u64)))
> +);
> +
> +TRACE_EVENT(trap_debug_regs,
> + TP_PROTO(int reg, bool is_write, u64 write_value),
> + TP_ARGS(reg, is_write, write_value),
> +
> + TP_STRUCT__entry(
> + __field(int, reg)
> + __field(bool, is_write)
> + __field(u64, write_value)
> + ),
> +
> + TP_fast_assign(
> + __entry->reg = reg;
> + __entry->is_write = is_write;
> + __entry->write_value = write_value;
> + ),
> +
> + TP_printk("%s reg %d (0x%08llx)", __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
> +);
> +
> #endif /* _TRACE_ARM64_KVM_H */
>
> #undef TRACE_INCLUDE_PATH
> --
> 2.3.5
>
Thanks,
-Christoffer
next prev parent reply other threads:[~2015-05-08 17:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 16:23 [PATCH v3 00/12] KVM Guest Debug support for arm64 Alex Bennée
2015-05-06 16:23 ` [PATCH v3 01/12] KVM: add comments for kvm_debug_exit_arch struct Alex Bennée
2015-05-08 9:19 ` Christoffer Dall
2015-05-06 16:23 ` [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values Alex Bennée
2015-05-08 9:23 ` Christoffer Dall
2015-05-08 11:09 ` Paolo Bonzini
2015-05-06 16:23 ` [PATCH v3 03/12] KVM: arm64: guest debug, define API headers Alex Bennée
2015-05-08 9:28 ` Christoffer Dall
2015-05-06 16:23 ` [PATCH v3 04/12] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl Alex Bennée
2015-05-08 11:52 ` Christoffer Dall
2015-05-06 16:23 ` [PATCH v3 05/12] KVM: arm: introduce kvm_arm_init/setup/clear_debug Alex Bennée
2015-05-08 11:52 ` Christoffer Dall
2015-05-06 16:23 ` [PATCH v3 06/12] KVM: arm64: guest debug, add SW break point support Alex Bennée
2015-05-08 11:52 ` Christoffer Dall
2015-05-06 16:23 ` [PATCH v3 07/12] KVM: arm64: guest debug, add support for single-step Alex Bennée
2015-05-08 11:52 ` Christoffer Dall
2015-05-07 9:07 ` [PATCH v3 08/12] KVM: arm64: re-factor hyp.S debug register code Alex Bennée
2015-05-08 14:12 ` Christoffer Dall
2015-05-07 9:07 ` [PATCH v3 09/12] KVM: arm64: guest debug, HW assisted debug support Alex Bennée
2015-05-08 16:32 ` Christoffer Dall
2015-05-07 9:07 ` [PATCH v3 10/12] KVM: arm64: trap nested debug register access Alex Bennée
2015-05-08 16:46 ` Christoffer Dall
2015-05-07 9:07 ` [PATCH v3 11/12] KVM: arm64: enable KVM_CAP_SET_GUEST_DEBUG Alex Bennée
2015-05-08 17:21 ` Christoffer Dall
2015-05-07 9:07 ` [PATCH v3 12/12] KVM: arm64: add trace points for guest_debug debug Alex Bennée
2015-05-08 17:25 ` Christoffer Dall [this message]
2015-05-08 16:33 ` [PATCH v3 00/12] KVM Guest Debug support for arm64 Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150508172503.GM24744@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).