next-20150511 / omap2-mcspi: regression for sdp4430 boot

[mwelling@ieee.org (Michael Welling)]

On Mon, May 11, 2015 at 02:00:08PM -0500, Nishanth Menon wrote:
> On 05/11/2015 01:30 PM, Michael Welling wrote:
> > On Mon, May 11, 2015 at 01:27:08PM -0500, Nishanth Menon wrote:
> >> On 05/11/2015 12:07 PM, Michael Welling wrote:
> >>> On Mon, May 11, 2015 at 11:50:19AM -0500, Nishanth Menon wrote:
> >>>> Hi,
> >>>>
> >>>> SDP4430 uses a SPI based network chip ks8851.
> >>>>
> >>>> next-20150508:
> >>>> https://github.com/nmenon/kernel-test-logs/blob/next-20150508/omap2plus_defconfig/sdp4430.txt
> >>>>
> >>>> However, next-20150511:
> >>>> https://github.com/nmenon/kernel-test-logs/blob/next-20150511/omap2plus_defconfig/sdp4430.txt
> >>>>
> >>>
> >>> I will look into this but it is going to be difficult to debug with access to the hardware.
> >>> This is what I get for changing a driver that effects so many SoCs.
> >>>
> >>
> >> Let me know if there is any test patch you'd want me to run. The board
> >> is on a remote "board farm" which most of TI folks have access to as
> >> well.. So, if you need anything run, just send out a debug patch OR a
> >> potential fix and we can help try it out and provide logs back for
> >> your debug.
> > 
> > Okay.
> > 
> > It looks like you revert the patches in the wrong order above.
> > 
> > The GPIO patch should apply after the transfer_one patch so it should
> > logically be reverted in the reverse order.
> > 
> Apologies on a slow response, was tracking another LPAE regression down.
> 
> I did do that -> but logged it in reverse - unfortunately it seems to
> have caused a little more confusion :(. is there something else you'd
> like me to do?

Okay I have another patch that appears to fix the issue on my board.

Please test the attached patch and see if it fixes the issue on your board.

If it does, I will send it upstream.

> 
> git log  next-20150508..next-20150511 drivers/spi
> Tells me:
> 
> commit bc7f9bbc80bcc77745b3f54ec4e7103e3e142bb9
> Author: Michael Welling <mwelling@ieee.org>
> Date:   Fri May 8 13:31:01 2015 -0500
> 
>     spi: omap2-mcspi: Add gpio_request and init CS
> 
>     If GPIO chip select is specified, request the GPIO in the setup
> function
>     and release it in the cleanup function.
> 
>     Signed-off-by: Michael Welling <mwelling@ieee.org>
>     Signed-off-by: Mark Brown <broonie@kernel.org>
> 
> commit b28cb9414db9f8e42ac18c9e360e4e99cda42489
> Author: Michael Welling <mwelling@ieee.org>
> Date:   Thu May 7 18:36:53 2015 -0500
> 
>     spi: omap2-mcspi: Switch driver to use transfer_one
> 
>     Switches from transfer_one_message to transfer_one to prepare
> driver for
>     use of GPIO chip selects.
> 
>     Signed-off-by: Michael Welling <mwelling@ieee.org>
>     Signed-off-by: Mark Brown <broonie@kernel.org>
> 
> 
> 
> my tested git log looks as follows: (redid it just to be sure):
> 
> a4617b41e04c Revert "spi: omap2-mcspi: Switch driver to use transfer_one"
> http://paste.ubuntu.org.cn/2595136
> 
> b49011271c7f Revert "spi: omap2-mcspi: Add gpio_request and init CS"
> http://paste.ubuntu.org.cn/2595142
> 
> 
> 012034602bd6 HACK: Makefile: Build a uImage with dtb already appended
> f17107cb8886 Add linux-next specific files for 20150511
> 
> 012034602bd6 commit is
> https://github.com/nmenon/linux-2.6-playground/commit/177f5f71b3f2 ->
> for legacy platforms needing uImage based booting.
> 
> -- 
> Regards,
> Nishanth Menon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: omap-mcspi.patch
Type: text/x-diff
Size: 2909 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150511/b4b4d9fb/attachment.bin>