[PATCH v5 05/12] mtd: pxa3xx_nand: rework flash detection and timing setup

[antoine.tenart@free-electrons.com (Antoine Tenart)]

Ezequiel,

On Mon, May 11, 2015 at 07:10:56PM -0300, Ezequiel Garcia wrote:
> 
> On 05/11/2015 11:58 AM, Antoine Tenart wrote:
> [..]
> > -
> > -	/* calculate flash information */
> > -	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
> > -
> 
> [..]
> > @@ -1732,6 +1669,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
> >  		host->mtd = mtd;
> >  		host->cs = cs;
> >  		host->info_data = info;
> > +		host->read_id_bytes = 4;
> 
> Are you sure this is correct? The value is set according to the page
> size before this patch.

Before reading the ID, the pxa3xx driver uses a default configuration,
builtin_flash_types[0], which defines a page size of 2048 leading to set
host->read_id_bytes to 4.

I'm using this default value here.

There might be an issue, as host->read_id_bytes isn't updated after
reading the ID (and getting the actual page size). I don't know if this
can be a problem. I can modify pxa3xx_nand_config_flash() to update
host->read_id_bytes if needed. What do you think?

Antoine

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com