linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V9 1/4] ARM: clk: imx: update pllv3 to support imx7
Date: Mon, 18 May 2015 19:58:42 +0800	[thread overview]
Message-ID: <20150518115842.GF1071@dragon> (raw)
In-Reply-To: <1431376208-474-2-git-send-email-Frank.Li@freescale.com>

On Tue, May 12, 2015 at 04:30:05AM +0800, Frank.Li at freescale.com wrote:
> From: Frank Li <Frank.Li@freescale.com>
> 
> Add type IMX_PLLV3_ENET_MX7

IMX7 instead of MX7.

> 
> Signed-off-by: Frank Li <Frank.Li@freescale.com>
> ---
>  drivers/clk/imx/clk-pllv3.c | 9 ++++++++-
>  drivers/clk/imx/clk.h       | 1 +
>  2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index 641ebc5..95e99dc 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -24,12 +24,14 @@
>  
>  #define BM_PLL_POWER		(0x1 << 12)
>  #define BM_PLL_LOCK		(0x1 << 31)
> +#define ENET_PLL_POWER		(0x1 << 5)

IMX7_ENET_PLL_POWER for better?

Shawn

>  
>  /**
>   * struct clk_pllv3 - IMX PLL clock version 3
>   * @clk_hw:	 clock source
>   * @base:	 base address of PLL registers
>   * @powerup_set: set POWER bit to power up the PLL
> + * @powerdown:   pll powerdown offset bit
>   * @div_mask:	 mask of divider bits
>   * @div_shift:	 shift of divider bits
>   *
> @@ -40,6 +42,7 @@ struct clk_pllv3 {
>  	struct clk_hw	hw;
>  	void __iomem	*base;
>  	bool		powerup_set;
> +	u32		powerdown;
>  	u32		div_mask;
>  	u32		div_shift;
>  };
> @@ -49,7 +52,7 @@ struct clk_pllv3 {
>  static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
>  {
>  	unsigned long timeout = jiffies + msecs_to_jiffies(10);
> -	u32 val = readl_relaxed(pll->base) & BM_PLL_POWER;
> +	u32 val = readl_relaxed(pll->base) & pll->powerdown;
>  
>  	/* No need to wait for lock when pll is not powered up */
>  	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
> @@ -293,6 +296,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
>  	if (!pll)
>  		return ERR_PTR(-ENOMEM);
>  
> +	pll->powerdown = BM_PLL_POWER;
> +
>  	switch (type) {
>  	case IMX_PLLV3_SYS:
>  		ops = &clk_pllv3_sys_ops;
> @@ -306,6 +311,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
>  	case IMX_PLLV3_AV:
>  		ops = &clk_pllv3_av_ops;
>  		break;
> +	case IMX_PLLV3_ENET_MX7:
> +		pll->powerdown = ENET_PLL_POWER;
>  	case IMX_PLLV3_ENET:
>  		ops = &clk_pllv3_enet_ops;
>  		break;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index 6bae537..bc06c8e 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -39,6 +39,7 @@ enum imx_pllv3_type {
>  	IMX_PLLV3_USB_VF610,
>  	IMX_PLLV3_AV,
>  	IMX_PLLV3_ENET,
> +	IMX_PLLV3_ENET_MX7,
>  };
>  
>  struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2015-05-18 11:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-11 20:30 [PATCH V9 0/4] Add Freescale i.mx7d support Frank.Li at freescale.com
2015-05-11 20:30 ` [PATCH V9 1/4] ARM: clk: imx: update pllv3 to support imx7 Frank.Li at freescale.com
2015-05-18 11:58   ` Shawn Guo [this message]
2015-05-11 20:30 ` [PATCH V9 2/4] ARM: imx: add imx7d clk tree support Frank.Li at freescale.com
2015-05-18 12:13   ` Shawn Guo
2015-05-11 20:30 ` [PATCH V9 3/4] ARM: dts: add imx7d soc dtsi file Frank.Li at freescale.com
2015-05-11 20:30 ` [PATCH V9 4/4] ARM: dts: add imx7d-sdb support Frank.Li at freescale.com

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150518115842.GF1071@dragon \
    --to=shawnguo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).