From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Mon, 18 May 2015 19:58:42 +0800 Subject: [PATCH V9 1/4] ARM: clk: imx: update pllv3 to support imx7 In-Reply-To: <1431376208-474-2-git-send-email-Frank.Li@freescale.com> References: <1431376208-474-1-git-send-email-Frank.Li@freescale.com> <1431376208-474-2-git-send-email-Frank.Li@freescale.com> Message-ID: <20150518115842.GF1071@dragon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, May 12, 2015 at 04:30:05AM +0800, Frank.Li at freescale.com wrote: > From: Frank Li > > Add type IMX_PLLV3_ENET_MX7 IMX7 instead of MX7. > > Signed-off-by: Frank Li > --- > drivers/clk/imx/clk-pllv3.c | 9 ++++++++- > drivers/clk/imx/clk.h | 1 + > 2 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c > index 641ebc5..95e99dc 100644 > --- a/drivers/clk/imx/clk-pllv3.c > +++ b/drivers/clk/imx/clk-pllv3.c > @@ -24,12 +24,14 @@ > > #define BM_PLL_POWER (0x1 << 12) > #define BM_PLL_LOCK (0x1 << 31) > +#define ENET_PLL_POWER (0x1 << 5) IMX7_ENET_PLL_POWER for better? Shawn > > /** > * struct clk_pllv3 - IMX PLL clock version 3 > * @clk_hw: clock source > * @base: base address of PLL registers > * @powerup_set: set POWER bit to power up the PLL > + * @powerdown: pll powerdown offset bit > * @div_mask: mask of divider bits > * @div_shift: shift of divider bits > * > @@ -40,6 +42,7 @@ struct clk_pllv3 { > struct clk_hw hw; > void __iomem *base; > bool powerup_set; > + u32 powerdown; > u32 div_mask; > u32 div_shift; > }; > @@ -49,7 +52,7 @@ struct clk_pllv3 { > static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) > { > unsigned long timeout = jiffies + msecs_to_jiffies(10); > - u32 val = readl_relaxed(pll->base) & BM_PLL_POWER; > + u32 val = readl_relaxed(pll->base) & pll->powerdown; > > /* No need to wait for lock when pll is not powered up */ > if ((pll->powerup_set && !val) || (!pll->powerup_set && val)) > @@ -293,6 +296,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, > if (!pll) > return ERR_PTR(-ENOMEM); > > + pll->powerdown = BM_PLL_POWER; > + > switch (type) { > case IMX_PLLV3_SYS: > ops = &clk_pllv3_sys_ops; > @@ -306,6 +311,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, > case IMX_PLLV3_AV: > ops = &clk_pllv3_av_ops; > break; > + case IMX_PLLV3_ENET_MX7: > + pll->powerdown = ENET_PLL_POWER; > case IMX_PLLV3_ENET: > ops = &clk_pllv3_enet_ops; > break; > diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h > index 6bae537..bc06c8e 100644 > --- a/drivers/clk/imx/clk.h > +++ b/drivers/clk/imx/clk.h > @@ -39,6 +39,7 @@ enum imx_pllv3_type { > IMX_PLLV3_USB_VF610, > IMX_PLLV3_AV, > IMX_PLLV3_ENET, > + IMX_PLLV3_ENET_MX7, > }; > > struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel