[PATCH] memory: tegra: Expose supported rates via debugfs

[PATCH] memory: tegra: Expose supported rates via debugfs

[Thierry Reding]

From: Thierry Reding <treding@nvidia.com>

In order to ease testing, expose the list of supported EMC frequencies
via debugfs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/memory/tegra/tegra124-emc.c | 42 +++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 8620355776fe..3dac7be39654 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -1027,7 +1027,40 @@ static int emc_debug_rate_set(void *data, u64 rate)
 DEFINE_SIMPLE_ATTRIBUTE(emc_debug_rate_fops, emc_debug_rate_get,
 			emc_debug_rate_set, "%lld\n");
 
-static void emc_debugfs_init(struct device *dev)
+static int emc_debug_supported_rates_show(struct seq_file *s, void *data)
+{
+	struct tegra_emc *emc = s->private;
+	const char *prefix = "";
+	unsigned int i;
+
+	for (i = 0; i < emc->num_timings; i++) {
+		struct emc_timing *timing = &emc->timings[i];
+
+		seq_printf(s, "%s%lu", prefix, timing->rate);
+
+		prefix = " ";
+	}
+
+	seq_puts(s, "\n");
+
+	return 0;
+}
+
+static int emc_debug_supported_rates_open(struct inode *inode,
+					  struct file *file)
+{
+	return single_open(file, emc_debug_supported_rates_show,
+			   inode->i_private);
+}
+
+static const struct file_operations emc_debug_supported_rates_fops = {
+	.open = emc_debug_supported_rates_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
 {
 	struct dentry *root, *file;
 	struct clk *clk;
@@ -1048,6 +1081,11 @@ static void emc_debugfs_init(struct device *dev)
 				   &emc_debug_rate_fops);
 	if (!file)
 		dev_err(dev, "failed to create debugfs entry\n");
+
+	file = debugfs_create_file("supported_rates", S_IRUGO, root, emc,
+				   &emc_debug_supported_rates_fops);
+	if (!file)
+		dev_err(dev, "failed to create debugfs entry\n");
 }
 
 static int tegra_emc_probe(struct platform_device *pdev)
@@ -1119,7 +1157,7 @@ static int tegra_emc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, emc);
 
 	if (IS_ENABLED(CONFIG_DEBUG_FS))
-		emc_debugfs_init(&pdev->dev);
+		emc_debugfs_init(&pdev->dev, emc);
 
 	return 0;
 };
-- 
2.3.5

[PATCH] memory: tegra: Expose supported rates via debugfs

[Tomeu Vizoso]

On 18 May 2015 at 17:35, Thierry Reding <thierry.reding@gmail.com> wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> In order to ease testing, expose the list of supported EMC frequencies
> via debugfs.

Looks good to me, but if this is for automated testing, why not just
read the timings from the DT? We would be covering more code that way.

Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

Regards,

Tomeu

> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/memory/tegra/tegra124-emc.c | 42 +++++++++++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
> index 8620355776fe..3dac7be39654 100644
> --- a/drivers/memory/tegra/tegra124-emc.c
> +++ b/drivers/memory/tegra/tegra124-emc.c
> @@ -1027,7 +1027,40 @@ static int emc_debug_rate_set(void *data, u64 rate)
>  DEFINE_SIMPLE_ATTRIBUTE(emc_debug_rate_fops, emc_debug_rate_get,
>                         emc_debug_rate_set, "%lld\n");
>
> -static void emc_debugfs_init(struct device *dev)
> +static int emc_debug_supported_rates_show(struct seq_file *s, void *data)
> +{
> +       struct tegra_emc *emc = s->private;
> +       const char *prefix = "";
> +       unsigned int i;
> +
> +       for (i = 0; i < emc->num_timings; i++) {
> +               struct emc_timing *timing = &emc->timings[i];
> +
> +               seq_printf(s, "%s%lu", prefix, timing->rate);
> +
> +               prefix = " ";
> +       }
> +
> +       seq_puts(s, "\n");
> +
> +       return 0;
> +}
> +
> +static int emc_debug_supported_rates_open(struct inode *inode,
> +                                         struct file *file)
> +{
> +       return single_open(file, emc_debug_supported_rates_show,
> +                          inode->i_private);
> +}
> +
> +static const struct file_operations emc_debug_supported_rates_fops = {
> +       .open = emc_debug_supported_rates_open,
> +       .read = seq_read,
> +       .llseek = seq_lseek,
> +       .release = single_release,
> +};
> +
> +static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
>  {
>         struct dentry *root, *file;
>         struct clk *clk;
> @@ -1048,6 +1081,11 @@ static void emc_debugfs_init(struct device *dev)
>                                    &emc_debug_rate_fops);
>         if (!file)
>                 dev_err(dev, "failed to create debugfs entry\n");
> +
> +       file = debugfs_create_file("supported_rates", S_IRUGO, root, emc,
> +                                  &emc_debug_supported_rates_fops);
> +       if (!file)
> +               dev_err(dev, "failed to create debugfs entry\n");
>  }
>
>  static int tegra_emc_probe(struct platform_device *pdev)
> @@ -1119,7 +1157,7 @@ static int tegra_emc_probe(struct platform_device *pdev)
>         platform_set_drvdata(pdev, emc);
>
>         if (IS_ENABLED(CONFIG_DEBUG_FS))
> -               emc_debugfs_init(&pdev->dev);
> +               emc_debugfs_init(&pdev->dev, emc);
>
>         return 0;
>  };
> --
> 2.3.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] memory: tegra: Expose supported rates via debugfs

[Thierry Reding]

On Tue, May 19, 2015 at 02:21:01PM +0200, Tomeu Vizoso wrote:
> On 18 May 2015 at 17:35, Thierry Reding <thierry.reding@gmail.com> wrote:
> > From: Thierry Reding <treding@nvidia.com>
> >
> > In order to ease testing, expose the list of supported EMC frequencies
> > via debugfs.
> 
> Looks good to me, but if this is for automated testing, why not just
> read the timings from the DT? We would be covering more code that way.
> 
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

The idea is that by putting this into debugfs we have a single source of
information to use in tests.

Now if in addition to merely testing the frequencies you want to make
sure the driver has a consistent representation of what's in device tree
we could always write another test that reads the device tree nodes and
compares them to the list of supported rates from debugfs.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150519/9abd9450/attachment.sig>