From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 2 Jun 2015 17:58:16 +0200 Subject: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box In-Reply-To: <1433170979-13725-1-git-send-email-hdegoede@redhat.com> References: <1433170979-13725-1-git-send-email-hdegoede@redhat.com> Message-ID: <20150602155816.GC23777@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote: > The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using > the same dts for both models. Unfortunately this does not work for the otg > controller, on the M9 this is routed to a micro-usb connector on the outside, > while as on the A1000G-quad it is connected to an usb to sata bridge > (which is not populated on the M9 pcb). > > This commit adds a new dts for the Mele-A1000G-quad to allow using > different otg controller settings on the 2 boards. > > Signed-off-by: Hans de Goede > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++-- Didn't we say that we were trying to set the vendor name in the DTs now, at least for the new ones? I can fix this and apply it if it's ok for you. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: