From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 2 Jun 2015 23:18:34 +0200 Subject: [PATCH 0/3] ARM: dts: sun8i-a33: Support for Sinlinx SinA33 dev board In-Reply-To: <1433239443-738-1-git-send-email-wens@csie.org> References: <1433239443-738-1-git-send-email-wens@csie.org> Message-ID: <20150602211834.GD23777@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jun 02, 2015 at 06:04:00PM +0800, Chen-Yu Tsai wrote: > Hi Maxime, > > This series enables support for the Sinlinx SinA33 dev board. This > is a core/daughter board SDK kit from Chinese vendor Sinlinx. The > core board itself does not have any special connectivity, so I > didn't split them into 2 files. > > The series is based on Vishnu/Hans' A33 series (v2). As the last > (dts) patch was not merged yet, there might be a conflict in > dts/Makefile. > > Patch 1 adds a pinmux setting for uart0 on PB pins. This is new on > A33, and is much better than using R_UART for console on A23, as > we can also see messages from BROM/boot0 when developing, and also > use the same earlyprintk settings as other sunxi platforms. > > Patch 2 adds a pinmux setting for 8 bit eMMC on mmc2. > mmc2 also has a reset pin, though I'm not sure if our mmc driver > actually uses it. Not using it seems to work anyway. > > Patch 3 adds the dts file for the SinA33 dev board. Just the basic > set of features are enabled: UART console, MMC, LRADC. Applied all three, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: